Big 11.11 Sale Limited Time 70% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code = simple70

Pass the Amazon Web Services AWS Certified Professional DOP-C02 Questions and answers with Dumpstech

Exam DOP-C02 Premium Access

View all detail and faqs for the DOP-C02 exam

Go to Exam
Practice at least 50% of the questions to maximize your chances of passing.
Viewing page 1 out of 11 pages
Viewing questions 1-10 out of questions
Questions # 1:

A company has deployed an Amazon Elastic Kubernetes Service (Amazon EKS) cluster with Amazon EC2 node groups. The company's DevOps team uses the Kubernetes Horizontal Pod Autoscaler and recently installed a supported EKS cluster Autoscaler.

The DevOps team needs to implement a solution to collect metrics and logs of the EKS cluster to establish a baseline for performance. The DevOps team will create an initial set of thresholds for specific metrics and will update the thresholds over time as the cluster is used. The DevOps team must receive an Amazon Simple Notification Service (Amazon SNS) email notification if the initial set of thresholds is exceeded or if the EKS cluster Autoscaler is not functioning properly.

The solution must collect cluster, node, and pod metrics. The solution also must capture logs in Amazon CloudWatch.

Which combination of steps should the DevOps team take to meet these requirements? (Select THREE.)

Options:

A.

Deploy the CloudWatch agent and Fluent Bit to the cluster. Ensure that the EKS cluster has appropriate permissions to send metrics and logs to CloudWatch.

B.

Deploy AWS Distro for OpenTelemetry to the cluster. Ensure that the EKS cluster has appropriate permissions to send metrics and logs to CloudWatch.

C.

Create CloudWatch alarms to monitor the CPU, memory, and node failure metrics of the cluster. Configure the alarms to send an SNS email notification to the DevOps team if thresholds are exceeded.

D.

Create a CloudWatch composite alarm to monitor a metric log filter of the CPU, memory, and node metrics of the cluster. Configure the alarm to send an SNS email notification to the DevOps team when anomalies are detected.

E.

Create a CloudWatch alarm to monitor the logs of the Autoscaler deployments for errors. Configure the alarm to send an SNS email notification to the DevOps team if thresholds are exceeded.

F.

Create a CloudWatch alarm to monitor a metric log filter of the Autoscaler deployments for errors. Configure the alarm to send an SNS email notification to the DevOps team if thresholds are exceeded.

Questions # 2:

An online retail company based in the United States plans to expand its operations to Europe and Asia in the next six months. Its product currently runs on Amazon EC2 instances behind an Application Load Balancer. The instances run in an Amazon EC2 Auto Scaling group across multiple Availability Zones. All data is stored in an Amazon Aurora database instance.

When the product is deployed in multiple regions, the company wants a single product catalog across all regions, but for compliance purposes, its customer information and purchases must be kept in each region.

How should the company meet these requirements with the LEAST amount of application changes?

Options:

A.

Use Amazon Redshift for the product catalog and Amazon DynamoDB tables for the customer information and purchases.

B.

Use Amazon DynamoDB global tables for the product catalog and regional tables for the customer information and purchases.

C.

Use Aurora with read replicas for the product catalog and additional local Aurora instances in each region for the customer information and purchases.

D.

Use Aurora for the product catalog and Amazon DynamoDB global tables for the customer information and purchases.

Questions # 3:

A company wants to use AWS Systems Manager documents to bootstrap physical laptops for developers The bootstrap code Is stored in GitHub A DevOps engineer has already created a Systems Manager activation, installed the Systems Manager agent with the registration code, and installed an activation ID on all the laptops.

Which set of steps should be taken next?

Options:

A.

Configure the Systems Manager document to use the AWS-RunShellScnpt command to copy the files from GitHub to Amazon S3, then use the aws-downloadContent plugin with a sourceType of S3

B.

Configure the Systems Manager document to use the aws-configurePackage plugin with an install action and point to the Git repository

C.

Configure the Systems Manager document to use the aws-downloadContent plugin with a sourceType of GitHub and sourcelnfo with the repository details.

D.

Configure the Systems Manager document to use the aws:softwarelnventory plugin and run the script from the Git repository

Questions # 4:

A global company manages multiple AWS accounts by using AWS Control Tower. The company hosts internal applications and public applications.

Each application team in the company has its own AWS account for application hosting. The accounts are consolidated in an organization in AWS Organizations. One of the AWS Control Tower member accounts serves as a centralized DevOps account with CI/CD pipelines that application teams use to deploy applications to their respective target AWS accounts. An 1AM role for deployment exists in the centralized DevOps account.

An application team is attempting to deploy its application to an Amazon Elastic Kubernetes Service (Amazon EKS) cluster in an application AWS account. An 1AM role for deployment exists in the application AWS account. The deployment is through an AWS CodeBuild project that is set up in the centralized DevOps account. The CodeBuild project uses an 1AM service role for CodeBuild. The deployment is failing with an Unauthorized error during attempts to connect to the cross-account EKS cluster from CodeBuild.

Which solution will resolve this error?

Options:

A.

Configure the application account's deployment 1AM role to have a trust relationship with the centralized DevOps account. Configure the trust relationship to allow the sts:AssumeRole action. Configure the application account's deployment 1AM role to have the required access to the EKS cluster. Configure the EKS cluster aws-auth ConfigMap to map the role to the appropriate system permissions.

B.

Configure the centralized DevOps account's deployment I AM role to have a trust relationship with the application account. Configure the trust relationship to allow the sts:AssumeRole action. Configure the centralized DevOps account's deployment 1AM role to allow the required access to CodeBuild.

C.

Configure the centralized DevOps account's deployment 1AM role to have a trust relationship with the application account. Configure the trust relationship to allow the sts:AssumeRoleWithSAML action. Configure the centralized DevOps account's deployment 1AM role to allow the required access to CodeBuild.

D.

Configure the application account's deployment 1AM role to have a trust relationship with the AWS Control Tower management account. Configure the trust relationship to allow the sts:AssumeRole action. Configure the application account's deployment 1AM role to have the required access to the EKS cluster. Configure the EKS cluster aws-auth ConfigMap to map the role to the appropriate system permissions.

Questions # 5:

The security team depends on AWS CloudTrail to detect sensitive security issues in the company's AWS account. The DevOps engineer needs a solution to auto-remediate CloudTrail being turned off in an AWS account.

What solution ensures the LEAST amount of downtime for the CloudTrail log deliveries?

Options:

A.

Create an Amazon EventBridge rule for the CloudTrail StopLogging event. Create an AWS Lambda (unction that uses the AWS SDK to call StartLogging on the ARN of the resource in which StopLogging was called. Add the Lambda function ARN as a target to the EventBridge rule.

B.

Deploy the AWS-managed CloudTrail-enabled AWS Config rule set with a periodic interval to 1 hour. Create an Amazon EventBridge rule tor AWS Config rules compliance change. Create an AWS Lambda function that uses the AWS SDK to call StartLogging on the ARN of the resource in which StopLoggmg was called. Add the Lambda function ARN as a target to the EventBridge rule.

C.

Create an Amazon EventBridge rule for a scheduled event every 5 minutes. Create an AWS Lambda function that uses the AWS SDK to call StartLogging on a CloudTrail trail in the AWS account. Add the Lambda function ARN as a target to the EventBridge rule.

D.

Launch a t2 nano instance with a script running every 5 minutes that uses the AWS SDK to query CloudTrail in the current account. If the CloudTrail trail is disabled have the script re-enable the trail.

Questions # 6:

A company must encrypt all AMIs that the company shares across accounts. A DevOps engineer has access to a source account where an unencrypted custom AMI has been built. The DevOps engineer also has access to a target account where an Amazon EC2 Auto Scaling group will launch EC2 instances from the AMI. The DevOps engineer must share the AMI with the target account.

The company has created an AWS Key Management Service (AWS KMS) key in the source account.

Which additional steps should the DevOps engineer perform to meet the requirements? (Choose three.)

Options:

A.

In the source account, copy the unencrypted AMI to an encrypted AMI. Specify the KMS key in the copy action.

B.

In the source account, copy the unencrypted AMI to an encrypted AMI. Specify the default Amazon Elastic Block Store (Amazon EBS) encryption key in the copy action.

C.

In the source account, create a KMS grant that delegates permissions to the Auto Scaling group service-linked role in the target account.

D.

In the source account, modify the key policy to give the target account permissions to create a grant. In the target account, create a KMS grant that delegates permissions to the Auto Scaling group service-linked role.

E.

In the source account, share the unencrypted AMI with the target account.

F.

In the source account, share the encrypted AMI with the target account.

Questions # 7:

A DevOps engineer needs to configure an AWS CodePipeline pipeline that publishes container images to an Amazon ECR repository. The pipeline must wait for the previous run to finish and must run when new Git tags are pushed to a Git repository connected to AWS CodeConnections. An existing deployment pipeline must run in response to new container image publications.

Which solution will meet these requirements?

Options:

A.

Configure a CodePipeline V2 type pipeline that uses QUEUED mode. Add a trigger filter to the pipeline definition that includes all tags. Configure an EventBridge rule that matches container image pushes to start the existing deployment pipeline.

B.

Configure a CodePipeline V2 type pipeline that uses SUPERSEDED mode. Add a trigger filter to the pipeline definition that includes all branches. Configure an EventBridge rule that matches container image pushes to start the existing deployment pipeline.

C.

Configure a CodePipeline V1 type pipeline that uses SUPERSEDED mode. Add a trigger filter to the pipeline definition that includes all tags. Add a stage at the end of the pipeline to invoke the existing deployment pipeline.

D.

Configure a CodePipeline V1 type pipeline that uses QUEUED mode. Add a trigger filter to the pipeline definition that includes all branches. Add a stage at the end of the pipeline to invoke the existing deployment pipeline.

Questions # 8:

A company wants to use a grid system for a proprietary enterprise m-memory data store on top of AWS. This system can run in multiple server nodes in any Linux-based distribution. The system must be able to reconfigure the entire cluster every time a node is added or removed. When adding or removing nodes an /etc./cluster/nodes config file must be updated listing the IP addresses of the current node members of that cluster.

The company wants to automate the task of adding new nodes to a cluster.

What can a DevOps engineer do to meet these requirements?

Options:

A.

Use AWS OpsWorks Stacks to layer the server nodes of that cluster. Create a Chef recipe that populates the content of the 'etc./cluster/nodes config file and restarts the service by using the current members of the layer. Assign that recipe to the Configure lifecycle event.

B.

Put the file nodes config in version control. Create an AWS CodeDeploy deployment configuration and deployment group based on an Amazon EC2 tag value for thecluster nodes. When adding a new node to the cluster update the file with all tagged instances and make a commit in version control. Deploy the new file and restart the services.

C.

Create an Amazon S3 bucket and upload a version of the /etc./cluster/nodes config file Create a crontab script that will poll for that S3 file and download it frequently. Use a process manager such as Monit or system, to restart the cluster services when it detects that the new file was modified. When adding a node to the cluster edit the file's most recent members Upload the new file to the S3 bucket.

D.

Create a user data script that lists all members of the current security group of the cluster and automatically updates the /etc/cluster/. nodes config. Tile whenever a new instance is added to the cluster.

Questions # 9:

A business has an application that consists of five independent AWS Lambda functions.

The DevOps engineer has built a CI/CD pipeline using AWS CodePipeline and AWS CodeBuild that builds tests packages and deploys each Lambda function in sequence. The pipeline uses an Amazon EventBridge rule to ensure the pipeline starts as quickly as possible after a change is made to the application source code.

After working with the pipeline for a few months the DevOps engineer has noticed the pipeline takes too long to complete.

What should the DevOps engineer implement to BEST improve the speed of the pipeline?

Options:

A.

Modify the CodeBuild projects within the pipeline to use a compute type with more available network throughput.

B.

Create a custom CodeBuild execution environment that includes a symmetric multiprocessing configuration to run the builds in parallel.

C.

Modify the CodePipeline configuration to run actions for each Lambda function in parallel by specifying the same runorder.

D.

Modify each CodeBuild protect to run within a VPC and use dedicated instances to increase throughput.

Questions # 10:

A company is using AWS CodePipeline to deploy an application. According to a new guideline, a member of the company's security team must sign off on any application changes before the changes are deployed into production. The approval must be recorded and retained.

Which combination of actions will meet these requirements? (Select TWO.)

Options:

A.

Configure CodePipeline to write actions to Amazon CloudWatch Logs.

B.

Configure CodePipeline to write actions to an Amazon S3 bucket at the end of each pipeline stage.

C.

Create an AWS CloudTrail trail to deliver logs to Amazon S3.

D.

Create a CodePipeline custom action to invoke an AWS Lambda function for approval. Create a policy that gives the security team access to manage CodePipeline custom actions.

E.

Create a CodePipeline manual approval action before the deployment step. Create a policy that grants the security team access to approve manual approval stages.

Viewing page 1 out of 11 pages
Viewing questions 1-10 out of questions