Pass the Amazon Web Services AWS Certified Associate DVA-C02 Questions and answers with Dumpstech

The requirement is specifically to have ECS automatically restore the last known good deployment when a new deployment fails, while the service is using the rolling update deployment type. Amazon ECS supports this through the deployment circuit breaker with the option to rollback on failures.

When enabled, the deployment circuit breaker monitors the deployment and detects failure conditions such as tasks repeatedly failing health checks, not reaching steady state, or being unable to start successfully. With rollback enabled, ECS automatically stops the failing deployment and reverts the service to the most recently completed (stable) task definition, restoring service stability without manual intervention.

Option D matches exactly: keep the rolling deployment type and enable circuit breaker + rollback. This is minimal change and directly addresses the behavior observed.

Options A and B are unrelated: service autoscaling adjusts desired count based on metrics and does not roll back failed deployments.

Option C could also achieve rollback behavior, but switching to blue/green introduces additional components (AWS CodeDeploy integration, target groups, and traffic shifting), which is unnecessary when the requirement can be met within rolling deployments.

Therefore, enabling the ECS deployment circuit breaker with rollback on failures for a rolling deployment is the correct solution.

Requirement Summary:

Lambda function:

Retrieves an item from DynamoDB

Updates its attributes or creates it if it does not exist

Has primary key

Needs minimum required IAM permissions

Analysis of Required Permissions:

To get an item and update it or create it if it doesn't exist, the Lambda function must use the **PutItem** or **UpdateItem** API, and read with **GetItem**.

Valid API options:

GetItem: Read the item from the table.

UpdateItem: Update existing item attributes or insert if it doesn't exist (with UpdateExpression and ConditionExpression).

When UpdateItem is used without a conditional check for existence, it can create a new item if it does not exist (acts like upsert).

DescribeTable: (Optional) Used if you need table metadata (not strictly required here).

Evaluate the Choices:

Option A:

DeleteItem – Not needed

GetItem –

PutItem – (can create/replace but not partial update)

Close, but PutItem overwrites the full item, not update-in-place. Acceptable, but UpdateItem is better suited.

Option B:

UpdateItem – Required to modify attributes or insert new item

GetItem – Required to check existence or read data

DescribeTable – Optional, but not harmful

BEST FIT – Matches the update-or-create logic.

Option C:

GetRecords – This is used for DynamoDB Streams, not standard GetItem

PutItem –

UpdateTable – Used to change table settings, not data manipulation

Incorrect usage context

Option D:

UpdateItem, GetItem, PutItem – all valid

But UpdateItem alone is sufficient; including PutItem might not be necessary Also, image is faded (possibly invalid), and it's redundant

UpdateItem API: https://docs.aws.amazon.com/amazondynamodb/latest/APIReference/API_UpdateItem.html

PutItem vs UpdateItem: https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/WorkingWithItems.html

IAM actions for DynamoDB: https://docs.aws.amazon.com/service-authorization/latest/reference/list_amazondynamodb.html

Amazon CloudWatch Logs Insights is a purpose-built log analytics tool that allows developers to run interactive queries directly against CloudWatch Logs. AWS documentation highlights Logs Insights as the fastest and most efficient way to search, filter, and analyze log data without exporting it.

Logs Insights queries can filter error messages, extract timestamps, and aggregate failure counts over specific time windows. This directly satisfies the requirement to identify when intermittent failures occurred and what errors caused them.

Manual browsing (Option A) and local downloads (Option C) are time-consuming and do not scale. Exporting logs to S3 and querying with Athena (Option D) introduces unnecessary infrastructure and operational overhead.

Therefore, CloudWatch Logs Insights is the most operationally efficient solution.

Amazon DynamoDB performance depends heavily on partition key design. AWS documentation warns against access patterns that repeatedly target the same partition key, as this causes hot partitions, even in on-demand mode.

In this scenario, most reads focus on the current day’s forecast for a small number of large cities. Using CityId alone as the partition key would cause hot partitions for those cities. Adding a calculated suffix (such as a hash or modulo value) to CityId spreads read requests across multiple partitions while still allowing efficient querying.

Using ForecastDate as the partition key (Options C and D) would concentrate traffic on a single value (today’s date), creating severe hot partition issues. Option B lacks a meaningful access pattern and complicates queries.

AWS documentation explicitly recommends key-suffix techniques for workloads with skewed access patterns to distribute traffic evenly. Therefore, using CityId with a calculated suffix as the partition key is the correct design.

API Gateway Stages: Stages in API Gateway represent distinct environments (like PROD and DEV) allowing different configurations.

Stage Variables: Stage variables store environment-specific information, including Lambda function aliases.

Ease of Management: This solution offers a straightforward way to manage different Lambda function versions across environments.

This solution meets the requirements in the most operationally efficient manner because it does not require any infrastructure provisioning or management. The developer can create a Lambda function that makes the API call and configure an EventBridge rule that triggers the function once a day at a designated time. This is a serverless solution that scales automatically and only charges for the execution time of the function.

This solution allows the developer to create and delete branches in AWS CodeCommit by granting the codecommit:CreateBranch and codecommit:DeleteBranch permissions. These are the minimum permissions required for this task, following the principle of least privilege. Option B grants too many permissions, such as codecommit:Put*, which allows the developer to create, update, or delete any resource in CodeCommit. Option C grants too few permissions, such as codecommit:Update*, which does not allow the developer to create or delete branches. Option D grants all permissions, such as codecommit:*, which is not secure or recommended.

AWS Systems Manager Parameter Store is a service that provides secure, hierarchical storage for configuration data and secrets. Parameter Store supports SecureString parameters, which are encrypted using AWS Key Management Service (AWS KMS) keys. SecureString parameters can be used to store license keys in AWS and retrieve them securely from automation scripts that run in EC2 instances or CloudFormation stacks. Parameter Store is a cost-effective solution because it does not charge for storing parameters or API calls. Reference: Working with Systems Manager parameters

AWS Secrets Manager is a service that allows you to store and manage secrets, such as database credentials, API keys, and passwords, in a secure and centralized way. It also provides features such as automatic secret rotation, auditing, and monitoring1. By using AWS Secrets Manager, you can avoid hardcoding credentials in your code, which is a bad security practice and makes it difficult to update them. You can also replicate your secrets to another Region, which is useful for disaster recovery purposes2. To access your secrets from your application, you can use the ARN of the secret, which is a unique identifier that includes the Region name. This way, your application can use the appropriate secret based on the Region where it is deployed3.

AWS Secrets Manager

Replicating and sharing secrets

Using your own encryption keys

This is a feature flag / dynamic configuration requirement: enable a new feature for a subset of users (premium customers), toggle it on/off quickly based on feedback/performance, and deploy configuration changes safely with validation and without disruption. AWS AppConfig (part of AWS Systems Manager) is designed for exactly this use case.

AWS AppConfig helps create, manage, and deploy application configurations, including feature flags, in a controlled way. It supports configuration validators (such as JSON schema or Lambda validators) to catch errors before deployment. It also supports controlled rollouts with deployment strategies to reduce blast radius (for example, gradual deployments). This allows rapid changes without redeploying code and minimizes disruption.

Option A aligns perfectly: use AppConfig feature flags to target premium users and toggle the feature quickly.

Option B is incorrect because Secrets Manager is for sensitive secrets (passwords, API keys), not feature flag management and progressive configuration deployments.

Option C is incorrect because AWS Config evaluates resource compliance and records configuration changes of AWS resources; it does not serve runtime feature flag delivery.

Option D (Parameter Store) can store configuration values, but it does not provide the same feature-flag-focused capabilities, validation/deployment strategies, and safe rollout controls that AppConfig provides. Also, “lifecycle rules” is not how Parameter Store toggles features.

Why Option A is Correct:Running an AWS Lambda function within the same VPC ensures secure communication without exposing the API application to public IP addresses. The Lambda function can serve as a secure EventBridge target to send events to the API.

Why Other Options are Incorrect:

Option B & C: Internet-facing load balancers expose public IP addresses, which violates compliance requirements.

Option D: EventBridge cannot directly target an endpoint within a private VPC without intermediary services like Lambda.

AWS Documentation References:

EventBridge Targets

Why Option C is Correct:Implementing a connection pool in the Redis client reduces connection overhead and avoids frequent connection establishment, which helps to reduce latency and connection failures.

Why Other Options are Incorrect:

Option A: Exponential backoff retry strategies help with transient failures but do not resolve latency caused by frequent connection establishment.

Option B: Storing scores in application memory adds complexity and risks inconsistency.

Option D: Adding more nodes is unnecessary unless the cluster is under heavy load. Latency due to connection failures is better addressed at the application level.

AWS Documentation References:

Amazon ElastiCache Best Practices

The most secure and AWS-recommended way for a Lambda function to access other AWS services is to use an IAM execution role. Lambda assumes this role at runtime and receives temporary credentials that are automatically rotated by AWS. The developer attaches the necessary permissions (the existing IAM policy) to that role, and then configures the Lambda function to use the role.

Option B follows least privilege and avoids long-term credentials. It also integrates with AWS security tooling: IAM Access Analyzer, CloudTrail, and policy boundaries can all be applied cleanly. Because the policy already exists, this requires minimal extra work: create/choose the execution role, attach the policy, and assign the role to the function.

Option A is not correct because IAM policies are attached to IAM identities (users, groups, roles) — not directly to Lambda functions as standalone entities. Lambda permissions are granted through the function’s execution role.

Option C is insecure because it uses long-term IAM user access keys embedded in environment variables. Even if encrypted, this expands the blast radius, complicates rotation, and contradicts AWS best practices for avoiding static credentials inside code/runtime.

Option D is extremely insecure and noncompliant. Root user access keys should not be used for applications and should generally not exist.

Therefore, create and attach the existing policy to a Lambda execution IAM role and assign that role to the function.

Amazon S3 supports server-side encryption, which encrypts data at rest on the server that stores the data. One of the encryption options is SSE-S3, which uses keys managed by S3. To use SSE-S3, the x-amz-server-side-encryption header must be set to AES256 when invoking the PutObject API operation. This instructs S3 to encrypt the object data with SSE-S3 before saving it on disks in its data centers and decrypt it when it is downloaded. Reference: Protecting data using server-side encryption with Amazon S3-managed encryption keys (SSE-S3)