Pass the CIPS Level 4 Diploma in Procurement and Supply L4M2 Questions and answers with Dumpstech

Explanation

The procurement team in the scenario is analysing the difference between the plan and actual spend. This activity is known as variance analysis. The sum of all variances gives a picture of the overall over-performance or under-performance for a particular reporting period. For each item, companies assess their favorability by comparing actual costs to standard costs in the industry.

For example, if the actual cost is lower than the standard cost for raw materials, assuming the same volume of materials, it would lead to a favorable price variance (i.e., cost savings). However, if the standard quantity was 10,000 pieces of material and 15,000 pieces were required in production, this would be an unfavorable quantity variance because more materials were used than anticipated.

Explanation

Competitive benchmarking

Competitive benchmarking is a direct competitor-to-competitor comparison of a product, service, process, or method. This form of benchmarking provides an opportunity to know yourself and your competition better; combine forces against another common competitor. An example of competitive benchmarking within the Department of Defense, might include contrasting Army and Air Force supply systems for Joint initiatives. Within the private sector, two or more American car companies might benchmark for mutual benefit against common international competitor; or, rival chemical companies benchmark for environmental compliance.

Benefits

- Comparing like processes

- Know your competition better

- Possible partnership

- Useful for planning and setting goals

- Similar regulatory issues

Challenges

- Difficult legal issues

- Relatively low performance improvement

- Threatening

- Limited by trade secrets

- May provide misleading information

- May not get best-in-class comparisons

- Competitors could capitalize on your weaknesses

Source: USN Benchmarking Handbook

Explanation

There are four common types of budgets that companies use: (1) incremental, (2) activity-based, (3) value proposition, and (4) zero-based.

Incremental budgeting takes last year’s actual figures and adds or subtracts a percentage to obtain the current year’s budget. It is the most common method of budgeting because it is simple and easy to understand.

Activity-based budgeting is a top-down budgeting approach that determines the amount of inputs required to support the targets or outputs set by the company. For example, a company sets an out-put target of $100 million in revenues. The company will need to first determine the activities that need to be undertaken to meet the sales target, and then find out the costs of carrying out these ac-tivities.

In value proposition budgeting, the budgeter considers the following questions:

- Why is this amount included in the budget?

- Does the item create value for customers, staff, or other stakeholders?

- Does the value of the item outweigh its cost? If not, then is there another reason why the cost is justified?

Value proposition budgeting is really a mindset about making sure that everything that is included in the budget delivers value for the business. Value proposition budgeting aims to avoid unneces-sary expenditures – although it is not as precisely aimed at that goal as our final budgeting option, zero-based budgeting.

As one of the most commonly used budgeting methods, zero-based budgeting starts with the as-sumption that all department budgets are zero and must be rebuilt from scratch. Managers must be able to justify every single expense. No expenditures are automatically “okayed”. Zero-based budgeting is very tight, aiming to avoid any and all expenditures that are not considered absolutely essential to the company’s successful (profitable) operation. This kind of bottom-up budgeting can be a highly effective way to “shake things up”. This is the method used in the scenario.

Explanation

Printing and office supplies are often considered as low risk, low value items. Consolidation low value, low risk items into a broader range will dramatically increases the value of the contract and leverage of buying organisation in the negotiation.

Explanation

The quantity of aluminium Apple needs to buy is calculated as follows:

Quantity needed for production + the inventory needed at the end of the year - inventory at start of the year

That formula is quantified as: 200 + 54.8 - 27.4 = 227.4

Detailed Explanation:

Zero-based budgeting emphasizes starting from scratch and justifying all expenses.

3 (Budget flexibility): Ensures resources are allocated dynamically based on needs.

4 (Focus on operational issues): Encourages alignment with operational priorities rather than historical trends.Using prior figures (1) is contrary to zero-based budgeting principles. Reference: CIPS Level 4, Financial Planning and Budgeting.

Explanation

There are many factors that need to be considered when making a business decision. Costs and benefits are among those factor. To estimate the length of time in which an investment reaches a break-even point, businesses often use the payback period. The payback period refers to the amount of time it takes to recover the cost of an investment.

'Yes, because it takes everything into account': It ignores the time value of money (TVM), unlike other methods of capital budgeting such as net present value (NPV), internal rate of return (IRR), and discounted cash flow.

'No, because payback period doesn’t take into account price fluctuations': Though it doesn't take into account price fluctuation, payback period is still useful in financial and capital budgeting.

'No, because payback period can be only used to calculate the depreciation of a fixed asset': Payback period only calculates the length of time in which the benefits of a charge repay its costs.

LO 1, AC 1.3

Explanation

Design specification is a detailed document providing a list of points regarding a product or pro-cess. For example, the design specification could include required dimensions, environmental fac-tors, ergonomic factors, aesthetic factors, maintenance that will be needed, etc. It may also give specific examples of how the design should be executed, helping others work properly (a guideline for what the person should do).

Performance specification is written requirement that describes the functional performance criteria required for a particular equipment, material, or product.

Tolerance is the permissable limit of a variable used to define a product

Statement of work is the document that captures and defines all aspects of a project, including the activities, deliverables and the timetable for the project.

Explanation

Price Analysis is the process of deciding if the asking price for a product or service is fair and rea-sonable, without examining the specific cost and profit calculations the vendor used in arriving at the price. It is basically a process of comparing the price with known indicators of reasonableness. When adequate price competition does not exist, some other form of analysis is required. Some reasons that could affect adequate price competition are: specifications are not definitive, tolerances are restrictive, or production capacity limits those eligible to bid.

Examples of other forms of price analysis information include:

• Analysis of previous prices paid

• Comparison of vendor’s price with the in-house estimate

• Comparison of quotations or published price lists from multiple vendors

• Comparisons with government agencies (such as GSA in the US) published prices

A strike price is the set price at which a derivative contract can be bought or sold when it is exercised. For call options, the strike price is where the security can be bought by the option holder; for put options, the strike price is the price at which the security can be sold. Strike price is also known as the exercise price.

A cost driver is the direct cause of a cost and its effect is on the total cost incurred. For example, if you are to determine the amount of electricity consumed in a particular period, the number of units consumed determines the total bill for electricity. In such a scenario, the number of units of electricity consumed is a cost driver.