Spring Sale Limited Time 75% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code = simple75

Pass the Cisco CCNP Collaboration 350-801 Questions and answers with Dumpstech

Home
Cisco
CCNP Collaboration
350-801
350-801 Questions and Answers

Exam 350-801 Premium Access

View all detail and faqs for the 350-801 exam

Go to Exam

Practice at least 50% of the questions to maximize your chances of passing.

Viewing page 6 out of 13 pages

Viewing questions 51-60 out of questions

Questions # 51:

An engineer encounters third-party devices that do not support Cisco Discovery Protocol. What must be configured on the network to allow device discovery?

Options:

LLDP

TFTP

LACP

SNMP

Answer

Explanation

LLDP (Link Layer Discovery Protocol) is a vendor-neutral network discovery protocol that is used to discover the topology of a network. LLDP is similar to CDP (Cisco Discovery Protocol), but it is not proprietary to Cisco. LLDP is supported by a wide range of network devices, including switches, routers, and firewalls.

To configure LLDP on a network, you must enable LLDP on the devices that you want to discover. You can then use a network management tool, such as Cisco Network Assistant, to view the topology of the network.

The other options are incorrect. TFTP (Trivial File Transfer Protocol) is a network protocol that is used to transfer files between devices. LACP (Link Aggregation Control Protocol) is a network protocol that is used to aggregate multiple network links into a single logical link. SNMP (Simple Network Management Protocol) is a network protocol that is used to manage network devices.

Questions # 52:

What is a characteristic of video traffic that governs QoS requirements for video?

Options:

Video is typically constant bit rate.

Voice and video are the same, so they have the same QoS requirements.

Voice and video traffic are different, but they have the same QoS requirements.

Video is typically variable bit rate.

Answer

Questions # 53:

A customer asked to integrate Unity Connection with Cisco UCM using SIP protocol. Which two features must be enabled on SIP security profiles? (Choose two.)

Options:

accept presence subscription

allow changing header

accept unsolicited notification

enable application-level authorization

accept replaces header

Answer

C, E

Questions # 54:

Which two features will access layer switches provide support providing high-quality voice and taking advantage of the full voice feature set? (Choose two.)

Options:

Deploy RSVP to improve VoIP QoS only where it will have a positive impact on quality and functionality where there is limited bandwidth and frequent network congestion.

Use multiple egress queues to provide priority queuing of RTP voice packet streams and the ability to classify or reclassify traffic and establish a network trust boundary.

Map audio and video streams of video calls (AF41 andAF42) to a class-based queue with weighted random early detection.

Implement IP RTP header compression on the serial interface to reduce the bandwidth required per voice call on point-to-point links.

Use 802 1Q trucking and 802.1p for proper treatment of Layer 2 CoS packet marking on ports with phones connected.

Answer

C, E

Questions # 55:

Which field is configured to change the caller ID information on a SIP route pattern?

Options:

Route Partition

Calling Party Transformation Mask

Called Party Transformation Mask

Connected Line ID Presentation

Answer

Questions # 56:

What happens to voice packets from a Cisco 8845 IP phone in the QoS trust boundary?

Options:

The voice packets are not trusted, and the access layer switch reclassifies the packets.

The voice packets are classified by the phone, and the classification is accepted

The voice and access layer switch negotiate the classification of packets

Cisco UCM determines how the voice packers are classified.

Answer

Questions # 57:

Question # 57

Refer to the exhibit. Which route pattern can the Cisco UCM administrator apply to the configuration to allow calls to "1306.1316.1326,13*6.13#6” only?

Options:

13XX

13[25-8]6

13!#

13[A3-9)6

Answer

Questions # 58:

When designing the capacity for a Cisco UCM 12.x cluster, an engineer must decide which VMware template will be used for each node. What is the lowest number of users supported in a template and the highest number of users in a template?

Options:

750 and 15.000 users

750 and 10.000 users

500 and 10.000 users

1000 and 10.000 users

Answer

Questions # 59:

What are two functions of Cisco Expressway in the Collaboration Edge? (Choose two.)

Options:

Expressway-C provides encryption (or Mobile and Remote Access but not (or business-to-business communications.

The Expressway-C and Expressway-E pair can enable connectivity from the corporate network to the PSTN via a T1/E1 trunk.

The Expressway-C and Expressway-E pair can interconnect H.323-to-SIP calls for voice.

Expressway-E provides a VPN entry point for Cisco IP phones with a Cisco AnyConnect client using authentication based on certificates.

Expressway-E provides a perimeter network that separates the enterprise network from the Internet.

Answer

C, E

Questions # 60:

A network administrator deleted a user from the LDAP directory of a company. The end user shows as Inactive LDAP Synchronized User in Cisco UCM. Which step is next to remove this user from Cisco UCM?

Options:

Delete the user directly from Cisco UCM.

Wait 24 hours for the garbage collector to remove the user.

Restart the Dirsync service after the user is deleted from LDAP directory.

Execute a manual sync to refresh the local database and delete the end user.

Answer

Viewing page 6 out of 13 pages

Viewing questions 51-60 out of questions

Modal title

Registered Required

In order to participate in the comments you need to be logged-in.
You can sign-up or login (it's free).