Pass the CompTIA A+ 220-1201 Questions and answers with Dumpstech

Dynamic Host Configuration Protocol (DHCP) is a network service used to automatically assign IP addresses and other network configuration details (such as subnet masks and default gateways) to devices on an enterprise-wide network.

Why Not A (DNS): DNS resolves domain names to IP addresses but does not allocate IP addresses.

Why Not B (Syslog): Syslog is used for logging system events, not IP address management.

Why Not C (Telnet): Telnet is a protocol for remote access, not for IP allocation.

CompTIA A+ Exam Reference: Core 1 (220-1201), Section 2.6, DHCP concepts​.

A PoE (Power over Ethernet) switch transmits both data and electrical power over Ethernet cables to devices like wireless access points or VoIP phones. This is especially useful in areas where separate power sources are not available.

Mobile Application Management (MAM) enforces policies restricting access to apps and services based on location, ensuring security at external sites.

Why Not A (MOW): "Mobile Only Workplace" (MOW) is not a recognized term in this context.

Why Not B (MAN): Metropolitan Area Network (MAN) is unrelated to mobile device policies.

Why Not C (MFA): Multi-Factor Authentication secures user accounts but does not enforce app restrictions.

CompTIA A+ Exam Reference: Core 2 (220-1102), Section 2.7, mobile device security policies​.

A hard disk drive (HDD), especially if it's older or nearly full, is the most common cause of slow startup times in laptops. HDDs are much slower than SSDs and can significantly bottleneck the boot process.

From CompTIA A+ 220-1101 Official Study Guide, Objective 4.1 – Troubleshoot common hardware problems:

“A slow startup or sluggish system performance is commonly due to a failing or fragmented hard disk drive (HDD). Replacing with an SSD can greatly improve boot times and overall system responsiveness.”

Verified Source:

CompTIA A+ Core 1 (220-1101) Official Study Guide, Chapter 4: Troubleshooting PC Hardware

CompTIA Exam Objectives 220-1101, Domain 4.1

============

A valid public IP address must fall outside the private IP address ranges:

10.0.0.0 to 10.255.255.255

172.16.0.0 to 172.31.255.255

192.168.0.0 to 192.168.255.255

66.157.195.20 is outside these ranges, making it a public IP address.

Why Not A, C, D: These IPs fall within private IP address ranges.

CompTIA A+ Exam Reference: Core 1 (220-1201), Section 2.6, IP addressing​.

PCIe (Peripheral Component Interconnect Express) is required for high-end video cards.

NVMe (Non-Volatile Memory Express) utilizes the M.2 or PCIe interface for the fastest SSD performance.

From CompTIA A+ 220-1101 Official Study Guide, Objective 3.2 – Motherboard expansion slots and storage interfaces:

“High-end video cards require a PCIe slot, while NVMe drives use M.2 (PCIe) slots for the highest data transfer rates.”

Verified Source:

CompTIA A+ Core 1 (220-1101) Official Study Guide, Chapter 3: Motherboard and Storage

CompTIA Exam Objectives 220-1101, Domain 3.2

============

An uninterruptible power supply (UPS) protects systems against power outages by providing temporary backup power, giving users time to save data and safely shut down.

From CompTIA A+ 220-1101 Official Study Guide, Objective 3.3 – Power protection:

“A UPS supplies backup power to prevent data loss and hardware damage during outages or surges, ensuring system integrity.”

Verified Source:

CompTIA A+ Core 1 (220-1101) Official Study Guide, Chapter 3: Power Protection

CompTIA Exam Objectives 220-1101, Domain 3.3

Physical damage from dropping a tablet may often affect ports or connectors. Before taking deeper diagnostic or replacement steps, it's important to visually inspect the USB-C charging port for damage or debris. If the port is damaged, charging issues can occur regardless of battery health.

Comprehensive and Detailed Step-by-Step Explanation:

Random BSODs (Blue Screen of Death), intermittent freezing, and degraded performance under load are common symptoms of failing or faulty RAM (Random Access Memory). Here's the reasoning:

RAM Module (Correct Answer):

Faulty or failing RAM can cause random BSODs due to memory errors when the system attempts to read or write to corrupted memory locations.

Intermittent freezing, especially under performance-intensive operations, can occur because the CPU relies heavily on RAM for active processing tasks.

Over time, heat generated during usage can exacerbate RAM instability, leading to progressively worse performance throughout the day.

Solution: The technician should run a memory diagnostic tool, such as Windows Memory Diagnostic or MemTest86, to confirm if the RAM is at fault.

Incorrect Options:

A. Video Card: A faulty video card can cause graphical glitches, screen artifacts, or crashes, but it is unlikely to cause system-wide performance degradation and random freezing under normal operations unless the issue is specific to GPU-intensive tasks (e.g., gaming or video rendering).

B. HDD: A failing hard drive can cause system slowdowns and freezing, but it typically produces other symptoms such as read/write errors, boot failures, or clicking sounds. HDD issues do not usually cause BSODs unless critical system files are corrupted.

D. TPM (Trusted Platform Module): A TPM is a hardware-based security module used for encryption and secure authentication. It does not affect performance or cause BSODs or freezing under normal operation.

Key Takeaway:

The symptoms described (random BSODs, intermittent freezing, and degraded performance under load) are most likely caused by faulty or failing RAM. Memory diagnostic tools should be used to confirm the issue.

Input voltage must be validated to ensure desktop PCs can operate in different regions with varying power standards (e.g., 110V in North America vs. 220V in Europe). Failure to verify input voltage compatibility can lead to hardware damage or operational issues.

Option B (BIOS language support): Incorrect. While language support may be helpful, it is not critical for hardware deployment across regions.

Option C (Supply chain security): Incorrect. This refers to ensuring secure sourcing of components but does not directly impact deployment.

Option D (Power efficiency): Incorrect. Power efficiency may be important for energy savings but is not relevant to regional compatibility.