Pass the Fortinet NSE 7 Network Security Architect NSE7_SSE_AR-26 Questions and answers with Dumpstech

Before FortiGate can steer traffic according to SD-WAN rules, certain configuration elements must be present. Fortinet SD-WAN design guidance describes the required elements: " SD-WAN is not a standalone feature and interacts with several fundamental FortiGate configurations. Specifically, you must: (1) Define the interfaces (physical, VLAN, or IPsec) that will act as SD-WAN members, (2) Create firewall policies to allow traffic to be steered by SD-WAN, and (3) Set up routing so that traffic has valid routes via SD-WAN members. Without these, SD-WAN rules will not be able to match or steer any traffic. " Security profiles and traffic shaping are not mandatory for basic SD-WAN steering but can be layered on for enhanced security and QoS once foundational elements are present.References: A deployment should preserve the distinction between the physical or logical WAN underlay, the IPsec overlay and the SD-WAN zone that groups forwarding members. These layers can have different routing and security-policy requirements. The configured architecture must also allow the required traffic paths and failover behavior rather than assuming every available interface is interchangeable.

The screenshot omits the application-destination selector because the corresponding FortiOS GUI feature has not been enabled. Option D is correct: open System > Feature Visibility and enable Application Detection Based SD-WAN. Fortinet documents the equivalent CLI setting as ' config system global ' followed by ' set gui-app-detection-sdwan enable ' . Once visible, individual applications, groups and categories can be selected in SD-WAN rules. This is supported for direct internet access and for standalone FortiGate appliances, so options A and B are wrong. Option C is also wrong because using the CLI is an alternative, not a required prerequisite when the GUI setting is available. Application-aware traffic steering additionally requires an application-control profile on an applicable firewall policy so traffic can be classified. Administrators should distinguish this application-signature selector from the Internet Service Database destination field: ISDB objects are another supported way to define destinations, but ISDB matching is not synonymous with application- control signature recognition. Review the GUI feature flag, firewall policy inspection profile and the matched service rule before evaluating the resulting forwarding member. This behavior is documented specifically in FortiOS 7.6 Application Steering Using SD-WAN Rules.

FortiSASE Branch On-ramp provides a cloud-integrated connectivity method for branch networks that require centralized security enforcement without building a traditional enterprise WAN infrastructure at every location.

Option B is correct because Branch On-ramp enables supported branch routers and FortiGate devices to establish secure IPsec tunnels to FortiSASE security points of presence.

After establishing the connection, branch traffic can be inspected using cloud-delivered firewall and security services. The architecture reduces the need to deploy and maintain a complete set of security inspection capabilities at each remote site.

Branch endpoints generally forward traffic through their local IPsec device, which serves as the default gateway. FortiClient installation is not required solely for branch on-ramp connectivity.

Option A is incorrect because the primary architecture forwards selected branch traffic toward FortiSASE rather than limiting connectivity to direct local internet breakout.

Option C is incorrect because Branch On-ramp does not universally replace endpoint protection software. Endpoint security remains an independent requirement.

Option D is incorrect because application performance optimization is associated primarily with SD-WAN path selection and digital experience monitoring rather than the principal Branch On-ramp function.

The architectural objective is to simplify branch deployment while maintaining consistent security inspection and access policies across geographically distributed sites.