Spring Sale Limited Time 75% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code = simple75

Pass the Google Cloud Certified Associate-Cloud-Engineer Questions and answers with Dumpstech

Exam Associate-Cloud-Engineer Premium Access

View all detail and faqs for the Associate-Cloud-Engineer exam

Go to Exam

Practice at least 50% of the questions to maximize your chances of passing.

Viewing page 9 out of 10 pages

Viewing questions 81-90 out of questions

Questions # 81:

You need to immediately change the storage class of an existing Google Cloud bucket. You need to reduce service cost for infrequently accessed files stored in that bucket and for all files that will be added to that bucket in the future. What should you do?

Options:

Use the gsutil to rewrite the storage class for the bucket Change the default storage class for the bucket

Use the gsutil to rewrite the storage class for the bucket Set up Object Lifecycle management on the bucket

Create a new bucket and change the default storage class for the bucket Set up Object Lifecycle management on lite bucket

Create a new bucket and change the default storage class for the bucket import the files from the previous bucket into the new bucket

Questions # 82:

Your company stores data from multiple sources that have different data storage requirements. These data include:

1. Customer data that is structured and read with complex queries

2. Historical log data that is large in volume and accessed infrequently

3. Real-time sensor data with high-velocity writes, which needs to be available for analysis but can tolerate some data loss

You need to design the most cost-effective storage solution that fulfills all data storage requirements. What should you do?

Options:

Use Spanner for all data.

Use Cloud SQL for customer data, Cloud Storage (Coldline) for historical logs, and BigQuery for sensor data.

Use Cloud SQL for customer data, Cloud Storage (Archive) for historical logs, and Bigtable for sensor data.

Use Firestore for customer data, Cloud Storage (Nearline) for historical logs, and Bigtable for sensor data.

Questions # 83:

You are a Google Cloud organization administrator. You need to configure organization policies and log sinks on Google Cloud projects that cannot be removed by project users to comply with your company's security policies. The security policies are different for each company department Each company department has a user with the Project Owner role assigned to their projects. What should you do?

Options:

Organize projects under folders for each department. Configure both organization policies and log sinks on the folders

Organize projects under folders for each department. Configure organization policies on the organization and log sinks on the folders.

Use a standard naming convention for projects that includes the department name. Configure organization policies on the organization and log sinks on the projects.

Use a standard naming convention for projects that includes the department name. Configure both organization policies and log sinks on the projects.

Questions # 84:

You have one project called proj-sa where you manage all your service accounts. You want to be able to use a service account from this project to take snapshots of VMs running in another project called proj-vm. What should you do?

Options:

Download the private key from the service account, and add it to each VMs custom metadata.

Download the private key from the service account, and add the private key to each VM’s SSH keys.

Grant the service account the IAM Role of Compute Storage Admin in the project called proj-vm.

When creating the VMs, set the service account’s API scope for Compute Engine to read/write.

Questions # 85:

You are working in a team that has developed a new application that needs to be deployed on Kubernetes. The production application is business critical and should be optimized for reliability. You need to provision a Kubernetes cluster and want to follow Google-recommended practices. What should you do?

Options:

Create a GKE Autopilot cluster. Enroll the cluster in the rapid release channel.

Create a GKE Autopilot cluster. Enroll the cluster in the stable release channel.

Create a zonal GKE standard cluster. Enroll the cluster in the stable release channel.

Create a regional GKE standard cluster. Enroll the cluster in the rapid release channel.

Questions # 86:

You are running out of primary internal IP addresses in a subnet for a custom mode VPC. The subnet has the IP range 10.0.0.0/20. and the IP addresses are primarily used by virtual machines in the project. You need to provide more IP addresses for the virtual machines. What should you do?

Options:

Change the subnet IP range from 10.0.0.0/20 to 10.0.0.0/22.

Change the subnet IP range from 10.0 0.0/20 to 10.0.0.0718.

Add a secondary IP range 10.1.0.0/20 to the subnet.

Convert the subnet IP range from IPv4 to IPv6

Questions # 87:

You have an application running in Google Kubernetes Engine (GKE) with cluster autoscaling enabled. The application exposes a TCP endpoint. There are several replicas of this application. You have a Compute Engine instance in the same region, but in another Virtual Private Cloud (VPC), called gce-network, that has no overlapping IP ranges with the first VPC. This instance needs to connect to the application on GKE. You want to minimize effort. What should you do?

Options:

1. In GKE, create a Service of type LoadBalancer that uses the application's Pods as backend.2. Set the service's externalTrafficPolicy to Cluster.3. Configure the Compute Engine instance to use the address of the load balancer that has been created.

1. In GKE, create a Service of type NodePort that uses the application's Pods as backend.2. Create a Compute Engine instance called proxy with 2 network interfaces, one in each VPC.3. Use iptables on this instance to forward traffic from gce-network to the GKE nodes.4. Configure the Compute Engine instance to use the address of proxy in gce-network as endpoint.

1. In GKE, create a Service of type LoadBalancer that uses the application's Pods as backend.2. Add an annotation to this service: cloud.google.com/load-balancer-type: Internal3. Peer the two VPCs together.4. Configure the Compute Engine instance to use the address of the load balancer that has been created.

1. In GKE, create a Service of type LoadBalancer that uses the application's Pods as backend.2. Add a Cloud Armor Security Policy to the load balancer that whitelists the internal IPs of the MIG's instances.3. Configure the Compute Engine instance to use the address of the load balancer that has been created.

Questions # 88:

Your company is running a three-tier web application on virtual machines that use a MySQL database. You need to create an estimated total cost of cloud infrastructure to run this application on Google Cloud instances and Cloud SQL. What should you do?

Options:

Use the Google Cloud Pricing Calculator to determine the cost of every Google Cloud resource you expect to use. Use similar size instances for the web server, and use your current on-premises machines as a comparison for Cloud SQL.

Implement a similar architecture on Google Cloud, and run a reasonable load test on a smaller scale. Check the billing information, and calculate the estimated costs based on the real load your system usually handles.

Use the Google Cloud Pricing Calculator and select the Cloud Operations template to define your web application with as much detail as possible.

Create a Google spreadsheet with multiple Google Cloud resource combinations. On a separate sheet, import the current Google Cloud prices and use these prices for the calculations within formulas.

Questions # 89:

You need to manage multiple Google Cloud Platform (GCP) projects in the fewest steps possible. You want to configure the Google Cloud SDK command line interface (CLI) so that you can easily manage multiple GCP projects. What should you?

Options:

1. Create a configuration for each project you need to manage.2. Activate the appropriate configuration when you work with each of your assigned GCP projects.

1. Create a configuration for each project you need to manage.2. Use gcloud init to update the configuration values when you need to work with a non-default project

1. Use the default configuration for one project you need to manage.2. Activate the appropriate configuration when you work with each of your assigned GCP projects.

1. Use the default configuration for one project you need to manage.2. Use gcloud init to update the configuration values when you need to work with a non-default project.

Questions # 90:

You are configuring service accounts for an application that spans multiple projects. Virtual machines (VMs) running in the web-applications project need access to BigQuery datasets in the crm-databases project. You want to follow Google-recommended practices to grant access to the service account in the web-applications project. What should you do?

Options:

Grant "project owner" for web-applications appropriate roles to crm-databases.

Grant "project owner" role to crm-databases and the web-applications project.

Grant "project owner" role to crm-databases and roles/bigquery.dataViewer role to web-applications.

Grant roles/bigquery.dataViewer role to crm-databases and appropriate roles to web-applications.

Viewing page 9 out of 10 pages

Viewing questions 81-90 out of questions