Black Friday VIP Hour Limited Time 75% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code = simple75
Pass the Huawei HCIA Collaboration H11-851_V4.0 Questions and answers with Dumpstech
Exam H11-851_V4.0 Premium Access
View all detail and faqs for the H11-851_V4.0 exam
Which of these CloudRSE user roles can release conference recordings?
Choose two
Options:
System administrator
Guest
Media administrator
Common user
Huawei CloudRSE implements role-based access control to separate system administration, media-content management, ordinary video access, and guest viewing.
The recording and streaming server supports four user roles: system administrator, media administrator, common user, and guest. Each role has different permissions associated with managing and accessing recorded content.
Option A is correct because the system administrator possesses administrative authority over the CloudRSE platform and can manage recorded programs, including releasing recordings.
Option C is correct because the media administrator is specifically authorized to manage recording and streaming content. Its responsibilities include editing program information, managing video metadata, releasing recorded programs, and removing published recordings.
Option B is incorrect because guests are restricted to viewing public content made available to them. They cannot perform recording-release operations.
Option D is incorrect because common users do not possess the general media-administration permissions required for releasing recorded programs through the CloudRSE management interface.
Huawei's Lab Guide explicitly identifies the system administrator and media administrator as the roles authorized to manage and release recorded programs.
The documented release procedure is performed through Programs > Release Management > Videos to Be Released, where an authorized administrator selects the appropriate recording and clicks Release.
Therefore, the correct selections are A and C.
Huawei reference: Lab Guide, Section 4.7.9, Releasing Recorded Programs, PDF pages 148–149; Training Material, PDF pages 496 and 509–511, Role- and Right-based Management and Managing Permissions.
Which of these statements are true about the VP9800-T series MCU?
Choose three
Options:
In an SVC conference, a single VP9860-T, VP9850-T, or VP9830-T supports a maximum of 300 concurrent 1080p30 participants in dual-electrical-port mode.
In a universal transcoding conference, a single VP9830-T supports concurrent access of up to 64 1080p30 participants.
The VP9800-T series MCU provides powerful H.265 4K universal transcoding capabilities and multistream forwarding capabilities.
The VP9800-T series MCU uses the dedicated hardware of the x86 architecture.
Huawei's VP9800-T series provides high-capacity media-processing functions that support AVC universal transcoding and SVC multistream forwarding within a converged MCU architecture.
Option A is correct. The Training Material specifies that VP9830-T, VP9850-T, and VP9860-T support up to 300 concurrent 1080p30 forwarding connections through the electrical-port configuration, subject to the documented operating conditions.
Option B is correct because the VP9830-T supports 64 concurrent 1080p30 participants in universal transcoding mode. The MCU uses its media-processing resources to accommodate participants requiring different media characteristics.
Option C is correct because the VP9800-T series supports H.265 4K universal transcoding and SVC multistream forwarding. These capabilities allow the MCU to support both high-quality traditional video conferences and bandwidth-efficient scalable video services.
Option D is incorrect. Huawei identifies the VP9800-T series as using its Kunpeng-based hardware architecture, rather than the dedicated x86 architecture specified in the option.
This distinction is important because Huawei offers different MCU product families with different hardware platforms.
Direct source confirmation: Huawei includes an equivalent multiple-answer question in the MCU module's own quiz and supplies the answer corresponding to these same three capabilities.
Huawei reference: Training Material, PDF page 41, VP9800(T) Series Fully-Converged Media Engine; PDF page 457, MCU Products and Features – Quiz, which explicitly supplies the equivalent answer.
Which of the following statements about IdeaHub configuration-management operations is false?
Options:
If a fault occurs on the endpoint, you can export the system configuration before restoring the endpoint to its factory settings.
You need to enter the administrator password to import the configuration file.
Before restoring the system configuration, ensure that the system configuration of the endpoint has been backed up. Otherwise, the restoration operation cannot be performed.
Restoring the backup configuration will trigger the endpoint to automatically restore the system configuration to the backup configuration immediately.
Huawei IdeaHub provides configuration-management functions that allow administrators to back up, restore, import, and export endpoint settings.
Option A is supported. Huawei recommends exporting the existing configuration before restoring an endpoint to factory settings. Previously exported settings can subsequently be imported, avoiding the need to reconfigure every parameter manually.
Option C is consistent with the backup-and-restore workflow. A configuration backup must exist before the endpoint can restore settings from that backup.
Option D describes restoration of previously backed-up configuration. Huawei's endpoint configuration-management interface supports restoration and indicates that the endpoint will restart automatically after backup settings have been restored. Consequently, restoration involves applying the saved configuration and completing the associated restart procedure.
Option B is the intended exception. The documented import procedure requires administrative access to the endpoint web interface, but the supplied guides do not identify a separate mandatory administrator-password entry specifically for importing a configuration file.
Verification concern: The Huawei guides do not explicitly state that an additional password is unnecessary. Furthermore, option D uses the word immediately, although the documented operation includes an endpoint restart. Thus, B is the most defensible intended answer, but the question is not conclusively resolved by the supplied materials and should be flagged before publication.
Huawei reference: Training Material, PDF page 396, Backup; pages 251–252, Backup and Restore and Import & Export.
A service area may contain multiple MCUs and RSEs.
Options:
TRUE
FALSE
In Huawei's video conferencing architecture, a service area is a logical resource-management domain used by the Service Management Center to organize and allocate conferencing resources.
A service area can contain multiple Multipoint Control Units and recording and streaming servers. The SMC manages these devices as resource pools and schedules services according to available capacity and applicable service-area matching rules.
Multiple MCUs within a service area enable the system to distribute participant connections, increase conference capacity, and provide redundancy. When one MCU cannot accommodate the required participants, automatic cascading may allow additional MCUs to contribute conference resources.
Similarly, multiple RSEs support scalable recording and streaming services. The SMC can select appropriate recording resources based on availability and resource utilization. Backup mechanisms help maintain service continuity when individual devices become unavailable.
Huawei's Training Material explicitly illustrates service areas containing multiple MCUs and explains that each service area is allocated MCU and RSE resources. It also describes load balancing and backup capabilities across these resources.
Therefore, the statement is true. A service area is not restricted to a single MCU or a single recording and streaming server. Its purpose is to provide a coordinated resource-management boundary that can include multiple devices.
Huawei reference: Training Material, PDF pages 596–598, Service Area Planning, and page 559, Resource Pool Management for Stable Conference Experience.
When installing and deploying the Box 310, you must connect the Touch to the Box 310 with a network cable and power the Touch by connecting it to the power adapter with a Type-C cable.
Options:
TRUE
FALSE
The Huawei Box 310 supports multiple methods of connecting and powering the Touch conference-control panel.
One supported method is to connect the Touch directly to the Box 310 using a network cable. The cable connects the Touch's PoE interface to the dedicated TOUCH port on the endpoint.
In this configuration, the Box 310 supplies electrical power to the Touch through the network connection. A separate Type-C power adapter is not required.
Huawei's Lab Guide explicitly identifies the TOUCH port as supporting power delivery to the Touch.
The Touch also includes a USB Type-C interface that can be connected to a dedicated power adapter. This interface is relevant when an alternative cabling or power-supply arrangement is used.
However, the statement incorrectly asserts that the Touch must be powered using a Type-C cable connected to a separate power adapter.
Huawei supports direct power delivery through the endpoint's TOUCH port, making the asserted requirement unnecessary.
Therefore, option B is correct.
The distinction matters during installation because selecting the correct cabling arrangement simplifies deployment and prevents unnecessary power-supply connections.
The supported power arrangement must be determined from the endpoint model and the selected Touch cabling topology.
Huawei reference: Lab Guide, Section 1.2.1.2, Touch Structure, PDF page 16; Section 5.1.1, Directly Connecting the Touch Using a Network Cable, PDF page 151.
Which of these statements is true about the Q.931 call process?
Options:
SETUP - ALERTING - CALL PROCEEDING - CONNECT - RELEASE COMPLETE
SETUP - CALL PROCEEDING - ALERTING - CONNECT - RELEASE COMPLETE
SETUP - CONNECT - ALERTING - CALL PROCEEDING - RELEASE COMPLETE
SETUP - CONNECT - CALL PROCEEDING - ALERTING - RELEASE COMPLETE
The H.225/Q.931 call-signaling protocol is used in H.323 multimedia communication systems to establish, manage, and release calls between endpoints.
The typical call-signaling sequence is SETUP → CALL PROCEEDING → ALERTING → CONNECT → RELEASE COMPLETE.
SETUP initiates the call and carries information identifying the calling and called parties.
CALL PROCEEDING indicates that the called endpoint has received the call request and is processing it. Huawei identifies this as optional signaling during the call-establishment phase.
ALERTING indicates that the called endpoint is alerting the user, typically corresponding to the ringing phase of the call.
CONNECT indicates that the called endpoint has accepted the call. This message confirms successful call establishment.
RELEASE COMPLETE is exchanged during call termination to indicate completion of the release procedure.
Option B is correct because it follows the sequence documented in Huawei's H.225/Q.931 signaling diagrams.
Option A incorrectly places ALERTING before CALL PROCEEDING. Options C and D incorrectly place CONNECT before the normal call-processing and alerting stages.
Although the precise signaling sequence can omit optional messages in particular call scenarios, the standard sequence presented in the Huawei course follows option B.
Understanding this progression is important when diagnosing H.323 call-establishment failures and interpreting endpoint signaling traces.
Huawei reference: Training Material, PDF pages 138–141, H.225/Q.931 Call Signaling (1), (2), and the associated signaling-flow diagrams.
The SMC manages MCUs as resources.
Which of the following statements are correct about MCU management and scheduling on the SMC?
Choose three
Options:
On the SMC web interface, you can view the basic information, alarms, logs, configuration information, and usage of the MCU.
You can add, modify, and delete MCUs on the SMC web interface.
On the SMC, you can configure load balancing, sharing, as well as redundancy and backup of MCU resources.
You can set the MCU working mode on the SMC.
Huawei's Service Management Center provides centralized MCU administration, resource management, scheduling, and operational monitoring. The SMC allows administrators to coordinate multiple MCUs and maintain conference availability without managing each conference connection individually.
Option A is correct because the SMC provides device-management capabilities covering configuration information, operational status, alarms, logs, and resource information. These functions allow administrators to inspect MCU health and diagnose service-related problems.
Option B is correct because administrators can perform MCU lifecycle management from the SMC web interface. The Training Material describes adding an MCU through Device Management > MCU. MCU configuration and registration parameters are centrally managed after the device is added.
Option C is also correct. Huawei supports MCU resource pools with load balancing, automatic cascading, and redundancy mechanisms. These capabilities improve resource utilization and conference reliability. When the primary MCU becomes unavailable, backup mechanisms can transfer conference services to another suitable MCU.
Option D is incorrect because the MCU working mode is configured through the MCU web interface. Huawei specifically describes MCU, SFU, and IAU operating modes as device-level configurations rather than SMC resource-scheduling settings.
The distinction is between centralized MCU resource administration and configuration of the MCU's internal media-processing mode.
Huawei reference: Training Material, PDF pages 441–442, Flexible Working Mode; pages 559 and 607–608, Resource Pool Management and Adding an MCU. Lab Guide, Section 5.3.3, Adding a CloudMCU.
Which of the following statements describes Huawei Video Motion Enhancement (VME) technology?
Options:
Detects faces in tracking mode and displays name tags, allowing participants to easily identify each other.
Enhances video quality by applying technologies including noise reduction, edge effect enhancement, blocking artifact removal, definition processing, and image mode adjustment.
Uses advanced image processing technologies, such as 2D and 3D noise reduction and digital wide dynamic range (WDR), to remove noise in low-light environments, adapt to different ambient light conditions, and display rich, ultra-HD images for video conferences.
Provides automatic white balance (AWB) and automatic exposure (AE) functions for automatic environment adaption. Supports multiple image modes, including standard, natural, vivid, scenery, soft, enhanced, and customized, to meet wide-ranging environment requirements.
Huawei Video Motion Enhancement (VME) is a proprietary video-processing technology designed to improve perceived image quality and produce clearer, more visually appealing conference video.
The technology combines several image-enhancement operations, including noise reduction, edge enhancement, blocking artifact removal, definition processing, and image-mode adjustment. These operations improve the appearance of compressed video and help preserve visual clarity under bandwidth-constrained conditions.
Option B is correct because it accurately identifies the image-processing functions associated with VME in Huawei's Training Material.
Option A describes an intelligent participant-identification function involving face detection and name tags. This is not the fundamental purpose of VME.
Option C describes camera image-processing capabilities associated with low-light performance and digital wide dynamic range. Although noise reduction overlaps with VME functionality, the complete description concerns camera imaging technology rather than the specifically defined VME algorithm.
Option D describes automatic exposure, automatic white balance, and camera image-mode configuration. These are camera adaptation functions.
Huawei combines VME with H.265 video encoding to improve overall visual performance. H.265 reduces the bandwidth required for compressed video, while VME enhances perceived image quality. This combination supports high-definition conferencing at relatively low transmission rates.
Huawei reference: Training Material, PDF page 188, H.265+VME, and page 53, Super PLC and Intelligent Bandwidth Prediction.
Which of these operations can be carried out through the endpoint web interface?
Choose five
Options:
Check the input port status (by indicator color) and output port status (by indicator color).
Configure the system.
Check the network connection status and the connection status with the H.323 and SIP servers.
Control device (audio and video control).
Maintain and troubleshoot the endpoint.
Huawei video conferencing endpoints provide a web-based management interface for configuration, monitoring, media control, maintenance, and fault diagnosis.
Option A is correct because the interface displays the operational status of input and output ports. The Lab Guide demonstrates how administrators can inspect port-status indicators to determine whether connected peripherals and media interfaces are functioning.
Option B is correct because the web interface supports configuration of system parameters, network settings, endpoint services, and associated device functions.
Option C is correct because the interface provides network-related information and server-registration status, enabling administrators to verify communication with H.323 and SIP signaling infrastructure.
Option D is correct because administrators can perform audio and video operations through endpoint management controls, including camera-related adjustments and other supported media functions.
Option E is correct because the web interface provides maintenance and troubleshooting capabilities. These include diagnostic functions, operational information, and mechanisms for examining endpoint faults.
Huawei's Lab Guide introduces the endpoint web interface as an essential operational tool in Experiment 1, while the Training Material describes the diagnostic and maintenance capabilities.
All five options represent supported functions. Consequently, there is no incorrect alternative in this question.
Huawei reference: Lab Guide, Section 1.3.3, Basic Operations of the Box Series (Web Interface), particularly PDF pages 42–50; Training Material, Endpoint Routine Maintenance and Device Diagnosis.
If a video-conferencing endpoint is not registered with the server by using H.323 or SIP, endpoint A can make a point-to-point call to endpoint B by using endpoint B’s IP address, provided that the two endpoints can communicate with each other.
Options:
TRUE
FALSE
Huawei video conferencing endpoints support point-to-point communication through direct IP-address dialing even when they are not registered with an H.323 gatekeeper or SIP registration server.
In a registered deployment, endpoints can use logical identifiers, such as H.323 numbers or SIP numbers, to establish calls. The associated signaling infrastructure resolves these identifiers and facilitates call routing.
When registration is unavailable, the endpoints can instead establish communication by directly addressing the destination endpoint's IP address.
Option A is correct because successful point-to-point communication does not inherently require registration with a central server, provided that the endpoints support compatible signaling and media capabilities and can communicate over the network.
Huawei's Lab Guide explicitly describes this procedure under Point-to-Point Call (Touch).
The administrator enters the destination endpoint's IP address in the meeting interface and initiates the call. The endpoint then attempts to establish the connection directly.
The guide further explains that, when the connection fails, engineers should verify network reachability and the accuracy of the destination IP address.
Firewalls, routing restrictions, and incompatible endpoint configurations can still prevent communication even when the addresses are correct.
The central distinction is that server registration enables number-based calling and centralized management, whereas direct IP dialing can support point-to-point calls independently.
Huawei reference: Lab Guide, Section 1.3.1.5, Point-to-Point Call (Touch), PDF pages 25–26; Section 1.3.2.5, Point-to-Point Call (Controller).