Summer Sale Limited Time 75% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code = simple75

Pass the Huawei HCIE-WLAN H12-351_V1.0 Questions and answers with Dumpstech

Exam H12-351_V1.0 Premium Access

View all detail and faqs for the H12-351_V1.0 exam

Go to Exam
Practice at least 50% of the questions to maximize your chances of passing.
Viewing page 4 out of 5 pages
Viewing questions 31-40 out of questions
Questions # 31:

Which of the following statements about the access layer design are true when Huawei ' s CloudCampus Solution is applied to small and midsize campus networks? (Select All that Apply)

Options:

A.

In the mini-store scenario, APs and egress devices must be deployed if Wi-Fi coverage is required. APs cannot directly connect to egress links and do not support NAT.

B.

When selecting a switch, ensure that the following condition is met; Number of connected APs x AP power ^ Power provided by the PoE switch. Therefore, select PoE switches with a proper power supply based on the AP model and quantity.

C.

Select appropriate models of access switches based on whether PoE support is required and how many APs need to access the network.

D.

For relatively large networks in midsize shopping malls, supermarkets, and primary/secondary education campuses, it is recommended that stack networking be used at the access layer. If a single device can provide sufficient access capacity for downstream terminals, single-device networking can be used at the access layer. If the upstream devices of access-layer devices are stacked, it is recommended that Eth-Trunks be used to connect to suc

Questions # 32:

In Huawei ' s wireless load balancing solution, a static load balancing group supports a maximum of_____members. (Enter only digits.)

Options:

Questions # 33:

On a campus network, which of the following problems may occur when you manually create a static VXLAN tunnel? (Select All that Apply)

Options:

A.

Although the static VXLAN tunnel mode supports the distributed gateway scenario, the configuration involves a heavy workload and is complex to adjust.

B.

A static VXLAN tunnel uses related protocols on the control plane, consuming device resources.

C.

If N devices need to establish VXLAN tunnels, you need to manually configure the ingress replication list up to N x (N-l)/2 times.

D.

Remote MAC addresses can be learned only through data flooding.

Questions # 34:

In the Huawei CloudCampus Solution, when cloud managed devices register with iMaster NCE-Campus in DHCP option mode, which of the following options is used to obtain the IP address of iMaster NCE-Campus?

Options:

A.

Option 158

B.

Option 43

C.

Option 53

D.

Option 138

E.

Option 148

Questions # 35:

Which of the following layers is not included in the overall networking logic of energy efficiency management in the loT solution?

Options:

A.

Terminal layer

B.

Egress layer

C.

Network layer

D.

Access layer

E.

Application layer

Questions # 36:

Which of the following key factors is used by the CloudCampus cloud management platform to determine the tenant to which a device belongs?

Options:

A.

Device ESN

B.

Device IP address

C.

Device MAC address

D.

Device model

Questions # 37:

Which of the following statements about fingerprint-based positioning technology are true? (Select All that Apply)

Options:

A.

The positioning engine generates a virtual fingerprint library through calculations based on the AP deployment and environment information.

B.

Terminals learn from each other to form a fingerprint library that can be shared.

C.

APs collect surrounding environment information to form a fingerprint library.

D.

The fingerprint map is obtained through onsite information collection.

Questions # 38:

In the early phase of a project, after the project requirements are clarified, the project owner should Checklist to describe the customer ' s requirements. (Capitalize the first letter of each word.)

Question # 38

Options:

Questions # 39:

When an 802.IX client uses MDS encryption, the user authentication mode can be set to EAP or CHAP on the device. When an 802. IX client uses PEAP authenticatwn, the user authentication mode can be set

to______on the device. (Enter the acronym in uppercase letters.)

Options:

Questions # 40:

A Wi-Fi RFID tag is a signal generator manufactured by tag vendors to help locate the objects. Which of the following types of tags can be located by Huawei devices?

Options:

A.

Hotspot tag

B.

AeroScout tag

C.

Location tag

D.

Ekahau tag

Viewing page 4 out of 5 pages
Viewing questions 31-40 out of questions