Black Friday VIP Hour Limited Time 75% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code = simple75
Pass the Huawei HCSP Presales H19-461_V1.0 Questions and answers with Dumpstech
Exam H19-461_V1.0 Premium Access
View all detail and faqs for the H19-461_V1.0 exam
When an old BOQ is opened, the parameter page and Spart page are gray and cannot be edited. Which of the following is the least likely cause?
Options:
The VR version configured in the old BOQ has been removed from the catalog.
The product has been removed from the catalog.
A display error occurs on the SCT page.
Exact Extract — Network Planning, Design, Configuration and Quotation Guide, Page 75
“Q2: Why cannot a product or part number that has been quoted before be found in the configurator?”
“Answer: 1. The product/part number cannot be sold or is removed from the market.”
Technical Deep Dive:
Huawei SCT configurations depend on product catalog records, software versions, and the associated configuration rules.
When an existing BOQ is reopened, SCT must reconcile the saved configuration with the currently available product catalog.
If the referenced product has been withdrawn, the configurator may be unable to load the editable product configuration.
Similarly, if the previously selected VR version is no longer available, the associated software and configuration rules may not support editing the historical configuration.
Such conditions can result in disabled parameters or a read-only configuration view.
Option A: A removed software release can prevent the configurator from resolving version-dependent parameters.
Option B: A discontinued or removed product can prevent configuration rules and associated sales items from loading.
Option C: A temporary display problem may affect how the interface is rendered but does not necessarily indicate that the underlying configuration data is invalid.
In practical troubleshooting, engineers should first confirm product lifecycle status, catalog availability, version compatibility, and applicable replacement part numbers.
Technical Conclusion: C is the least likely underlying catalog-related cause. A genuine client-side rendering defect can still disable controls, so the question should not be interpreted as saying that UI failures are impossible.
In a coherent transmission system, if system dispersion and PMD are within the tolerance range, the dispersion penalty need not be considered.
Options:
TRUE
FALSE
Exact Extract — Network Planning, Design, Configuration and Quotation Guide, Page 51
“For a pure coherent system, dispersion does not need to be considered. Skip the step for configuring dispersion compensation.”
Technical Deep Dive:
Coherent optical transmission uses advanced modulation formats and digital signal processing (DSP) to recover optical signals affected by transmission impairments.
Two important impairments are chromatic dispersion (CD) and polarization-mode dispersion (PMD).
Chromatic dispersion occurs because different spectral components of an optical signal propagate at different group velocities. In conventional intensity-modulated transmission, accumulated dispersion can introduce substantial signal distortion.
PMD arises when two orthogonal polarization modes propagate with different group delays. Its effect is generally characterized by differential group delay (DGD).
Modern coherent receivers employ DSP functions such as adaptive equalization and chromatic dispersion compensation to mitigate these impairments.
When the accumulated dispersion and PMD remain within the receiver ' s specified compensation capability and applicable zero-penalty operating region, additional dispersion penalties need not be included in the system design.
This simplifies WDM network planning because traditional dispersion compensation modules (DCMs) are not required solely to compensate chromatic dispersion in a suitable coherent system.
Eliminating DCMs can also reduce insertion loss, optical equipment requirements, and transmission latency.
However, designers must still evaluate optical signal-to-noise ratio (OSNR), nonlinear impairments, receiver tolerances, and system margins. Being within an absolute tolerance limit does not universally guarantee zero implementation penalty.
Technical Conclusion: A is correct under the stated condition that dispersion and PMD remain within the receiver ' s applicable penalty-free tolerance.
Whenever a 200G pluggable optical module is used, a 200G line-side port enable RTU must be configured.
Options:
TRUE
FALSE
Exact Extract — Network Planning, Design, Configuration and Quotation Guide, Page 66
“Select the base board type for the configuration board based on the network planning result. Different base boards correspond to different WDM-side or client-side optical modules.”
Technical Deep Dive:
Huawei optical transport products may implement Right-to-Use (RTU) licensing to control the activation of line-side ports and authorized transmission capacities.
A 200G pluggable coherent optical module provides the optical interface necessary for transmitting a high-capacity wavelength. However, installing the hardware does not necessarily mean that the corresponding line port is enabled for service.
On platforms that require a 200G line-port enable RTU, the applicable license authorizes operation of the associated port.
Two licensing concepts must be distinguished:
Port enable RTU: Authorizes the use of a physical or logical line port.
Line capacity RTU: Authorizes an increase in transmission capacity beyond the capacity already included with the board.
For example, a board may support a 200G optical port physically but have a lower initial licensed capacity. Additional capacity licensing may be required before the full line rate becomes available.
The SCT configuration should therefore consider the board model, pluggable optical module, port mode, initial entitlement, and corresponding software license.
Technical Conclusion: A reflects the intended RTU-controlled 200G port scenario. However, the word whenever is too absolute: a separate enable RTU is required only where the particular board and licensing package mandate it. The exact entitlement is not established by the uploaded training extract.
What is the maximum OTN cross-connect capacity for the OptiXtrans E6616?
Options:
2.4T
2.8T
2.0T
920G
Exact Extract — Huawei E9600 and E6600 Series Products and Industry Applications Introduction, Page 13
“K5XCH: OTN”
“OTN: 2.4T”
Additional Official Huawei Product Extract — OptiXtrans E6616 V100R024C10 Brochure
“K5SXCH: Up to 2.8T OTN”
“K6XCH: Up to 2.8T OTN”
Technical Deep Dive:
The maximum OTN cross-connect capacity of the OptiXtrans E6616 depends on the installed system control and cross-connect board, as well as the supported hardware and software release.
The older HCSP training identifies 2.4 Tbit/s using the K5XCH board.
However, Huawei ' s later official E6616 product documentation identifies a maximum OTN cross-connect capacity of 2.8 Tbit/s when supported K5SXCH or K6XCH boards are installed.
The published board-capacity comparison includes:
Cross-connect board | OTN cross-connect capacity
K5UXCME | 920 Gbit/s
K5XCH | 2.4 Tbit/s
K5SXCH | 2.8 Tbit/s
K6XCH | 2.8 Tbit/s
The K6XCH architecture also supports 200 Gbit/s per-slot capacity in the specified product configuration.
Greater cross-connect capacity allows the device to aggregate and switch more high-bandwidth services within the chassis.
The selected cross-connect board must be compatible with the device software release, power configuration, service boards, and capacity licensing requirements.
Technical Conclusion: B is correct when evaluating the maximum capacity supported by the expanded E6616 product portfolio.
Release-specific clarification: The uploaded V1.0 training presents a 2.4T configuration, whereas Huawei ' s later official product specification confirms 2.8T as the maximum. For a question explicitly restricted to the older training configuration, A would be defensible. The question should specify the relevant release or supported board generation to eliminate that ambiguity.
Which of the following statements concerning the E9612 is true?
Options:
The E9612 supports a maximum of Super C-band 120 wavelengths@50 GHz and can evolve to the L band.
The fan board of the E9612 has upper and lower layers.
The E9612 also supports OTN cross-connect boards.
A maximum of four E9612s can be installed in a cabinet.
Exact Extract — E9600 and E6600 Series Products and Industry Applications Introduction, Page 8
“120 wavelengths@50 GHz, 80 wavelengths@75 GHz”
Additional Exact Extract — Page 9
“Fan (IU90), single-layer fan”
The product introduction also identifies evolution from Super C-band operation to C+L-band transmission.
Technical Deep Dive:
The OptiXtrans E9612 is a compact optical-layer transmission subrack designed for high-capacity DWDM transport.
Option A — Correct: Its Super C-band architecture supports up to 120 wavelengths using 50 GHz channel spacing. The platform also supports evolution toward L-band optical transport, allowing network operators to expand spectrum resources as bandwidth requirements increase.
Option B — Incorrect: Huawei specifies a single-layer fan assembly installed in slot IU90. The fan architecture does not use the upper-and-lower dual-layer arrangement described in this option.
Option C — Incorrect: The E9612 is primarily an optical-layer platform. It does not provide the centralized OTN electrical cross-connect capability available in the E9624.
Option D — Incorrect: An E9612 has a nominal height of 7.8U. Huawei ' s illustrated standard cabinet configuration accommodates five E9612 subracks, subject to cabinet and supporting equipment requirements. Therefore, four is not the stated maximum.
The distinction between E9612 and E9624 is important in optical network design. The E9612 emphasizes high-density optical functionality, while the E9624 integrates optical transmission with electrical-layer switching and grooming.
Technical Conclusion: A is the only correct option. The Super C-band wavelength capacity and planned evolution to the L band are directly confirmed by Huawei ' s product specifications.
Which of the following statements about the license configuration of enterprise WDM series are correct?
Select All that Apply
Options:
The cross-connect capacity license is used to control the expansion of the port capacity.
If the Fiber Doctor function is selected on the DC908, the intelligent fiber monitoring license will be configured.
To configure Liquid OTN services on the port of the line board, a Liquid OTN license is required.
If the IEEE 1588v2 feature is required, each set of devices on the clock tracing path requires one IEEE 1588v2 function license.
Exact Extract — Network Planning, Design, Configuration and Quotation Guide, Pages 61 and 67
“Capacity of Centralized Cross Connect Board: This parameter is used to configure a centralized cross-connect capacity license.”
“Need 1588V2 Function or not: If the IEEE 1588v2 feature is required, each device on the clock tracing path requires one piece of IEEE 1588v2 function software.”
Technical Deep Dive:
Huawei enterprise WDM systems use software licensing to enable selected optical transport capabilities and control the expansion of licensed resources.
Option A — Incorrect. A cross-connect capacity license controls the amount of traffic that the cross-connect architecture is authorized to switch or groom. Physical port capacity and line-port activation are distinct licensing dimensions. Increasing the cross-connect capacity does not automatically authorize additional physical line-port capacity.
Option B — Correct under the intended licensing scheme. Fiber Doctor provides optical fiber monitoring and fault-localization capabilities. It can use embedded OTDR technology to detect fiber abnormalities, locate faults, and support proactive optical cable maintenance. The associated intelligent fiber monitoring entitlement must be included where the feature is separately licensed.
Option C — Correct under the intended licensing scheme. Liquid OTN enables fine-granularity hard-pipe service transmission. Applicable line-board functions may require corresponding feature entitlements to support OSU-based service transport.
Option D — Correct. IEEE 1588v2 supports precision time synchronization through Precision Time Protocol (PTP) messaging. Every participating network element that requires the licensed synchronization functionality must be appropriately authorized.
Licensing only the source and destination devices is insufficient when intermediate devices are required to process or regenerate timing information.
Technical Conclusion: B, C, and D are the intended selections. The supplied training explicitly establishes D and the distinction underlying A. The exact Fiber Doctor and Liquid OTN license-product mappings in B and C require release-specific SCT verification; they are not individually documented in the uploaded slides.
Which of the following Huawei transmission products is the smallest in physical size?
Options:
OptiXtrans E6608
OptiXtrans E9605
OptiXtrans A810
OptiXtrans E9624
Relevant Extract — Huawei E9600 and E6600 Series Products and Industry Applications Introduction, Pages 6, 11 and 14
The training specifies the E9624 as a 17U subrack, the E9605 as a 4U subrack, and the E6608 as a 2U subrack.
Additional Official Huawei Product Specification — OptiXstar A800 Series
“Dimensions (H x W x D): 43.6 x 250 x 180 mm”
Technical Deep Dive:
Huawei provides transmission equipment with different physical dimensions to accommodate backbone, aggregation, and access-network applications.
The products listed in the question have different equipment roles and installation requirements.
Product | Approximate dimensions (H × W × D)
OptiXtrans E6608 | 88 × 442 × 220 mm
OptiXtrans E9605 | 177 × 442 × 260 mm
OptiXstar A810 A | 43.6 × 250 × 180 mm
OptiXtrans E9624 | 747.2 × 442 × 295 mm
The A810 is a compact optical Customer-Premises Equipment (CPE) device intended for small enterprise and access-network installations.
Its dimensions are substantially smaller than the rack-mounted E6608, E9605, and E9624 platforms.
The device supports applications requiring compact optical transport connectivity without deploying a larger multi-slot transmission chassis.
Huawei ' s A810 access equipment supports services such as E1 and Ethernet within the supported OTN and SDH access architecture.
Its compact form factor also allows flexible installation, including desktop, wall-mounted, or cabinet deployment.
Technical Conclusion: C is correct.
Product-name correction: The official Huawei product designation is OptiXstar A810 A, rather than OptiXtrans A810. The original answer option is preserved, but its product-family name should be corrected in a revised examination question.
Which of the following protection schemes does the OptiXtrans E6600 series support?
Select All that Apply
Options:
ODUk SNCP
Client 1+1 protection
OLP
IP RAN
Relevant Training Extract — Huawei E9600 and E6600 Series Products and Industry Applications Introduction, Page 33
“Full SDH protection”
The protection architecture includes Subnetwork Connection Protection (SNCP), Multiplex Section Protection (MSP), and related network protection mechanisms.
Additional Official Huawei Technical Reference — OptiXtrans E6616 Product Brochure
“Client 1+1 protection, intra-board 1+1 protection, ODUk SNCP, optical line protection”
Technical Deep Dive:
Huawei OptiXtrans E6600 equipment supports multiple protection mechanisms to improve optical network availability and reduce the service impact of equipment and transmission failures.
Option A — ODUk SNCP (Correct):
ODUk Subnetwork Connection Protection provides protection at the OTN electrical-layer service level. A service can be transmitted along protected paths, allowing the receiving equipment to select the suitable signal when degradation or failure occurs.
Option B — Client 1+1 protection (Correct):
Client-side 1+1 protection provides redundant transmission resources for customer-facing services. A protected service can be carried through working and protection resources so that a single qualifying failure does not necessarily interrupt service availability.
Option C — OLP (Correct):
Optical Line Protection protects optical fiber transmission paths. It can switch optical traffic between working and protection fiber routes when supported failure conditions occur.
Option D — IP RAN (Incorrect):
IP Radio Access Network is a network architecture used to transport mobile radio access traffic. It is not itself an optical transport protection mechanism.
Huawei E6600 platforms may transport IP RAN services, but that does not make IP RAN a protection scheme.
Technical Conclusion: A, B, and C are correct. The precise protection features available depend on the platform model, boards, software release, and network configuration.
In a financial data-center transmission solution, which of the following provides low latency?
Options:
Board-free
Power-on-free
DCM-free
Installation-free
Exact Extract — Network Planning, Design, Configuration and Quotation Guide, Page 51
“For a pure coherent system, dispersion does not need to be considered. Skip the step for configuring dispersion compensation.”
Additional Training Reference — Huawei DC908 Solutions and Technologies Introduction, Page 85
The financial data center interconnection architecture emphasizes low latency, high availability, secure transmission, and simplified optical networking.
Technical Deep Dive:
Financial data center transmission networks often carry latency-sensitive applications such as payment processing, financial transactions, database replication, and distributed storage traffic.
End-to-end transmission latency is influenced by fiber propagation delay, equipment processing, signal regeneration, and the additional optical path length introduced by certain compensation components.
Traditional optical transmission systems may use Dispersion Compensation Modules (DCMs) to compensate for chromatic dispersion accumulated along optical fibers.
A common form of DCM uses dispersion-compensating fiber that introduces additional optical path length.
This additional fiber can increase signal propagation delay and insertion loss.
Coherent optical transmission systems use digital signal processing to compensate for chromatic dispersion electronically, reducing or eliminating the requirement for conventional optical DCMs.
A DCM-free architecture can therefore reduce the additional delay associated with dispersion-compensating fiber and simplify optical transmission design.
It also reduces the need for separate optical compensation equipment and can improve the optical power budget.
Option A: Board-free is not a meaningful description of the relevant latency optimization mechanism.
Option B: Power-on-free does not describe an operational optical transmission design.
Option C: DCM-free correctly identifies the elimination of a potential source of additional propagation delay.
Option D: Installation-free does not describe a transmission latency optimization technique.
Technical Conclusion: C is correct. DCM-free coherent optical transmission can reduce latency by eliminating the additional optical path length associated with traditional dispersion-compensating fiber modules.
What is the primary difference between NCE-T and NCE-T Lite?
Options:
Different function
Different quotation item
Different network management scales
Exact Extract — Huawei DC908 Solutions and Technologies Introduction, Page 96
“Flexibly defined management and control solutions based on different network scales”
The management comparison identifies iMaster NCE-T Lite for medium-sized DCI networks with fewer than 1,000 network elements and iMaster NCE-T for larger networks exceeding 1,000 network elements.
Technical Deep Dive:
The primary distinction between iMaster NCE-T and iMaster NCE-T Lite is the supported network management scale and associated deployment architecture.
iMaster NCE-T is an intelligent optical network management and control platform that supports centralized network supervision, topology management, performance monitoring, fault management, service provisioning, and network automation.
NCE-T Lite is optimized for enterprise and medium-sized optical transport deployments where a lighter management environment is sufficient.
The training architecture identifies three principal management scenarios:
• WebGUI/CLI: Single-device management without a dedicated management server.
• NCE-T Lite: Medium-sized networks, with simplified server deployment.
• NCE-T: Large-scale networks requiring a full server-based management environment.
Both editions belong to the same transport network management ecosystem, but their scale, deployment resources, licensing requirements, and supported feature combinations must be evaluated against the applicable release.
Technical Conclusion: Option C correctly identifies the principal difference.