Black Friday VIP Hour Limited Time 75% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code = simple75
Pass the Huawei HCSP Presales H20-688_V1.0 Questions and answers with Dumpstech
Exam H20-688_V1.0 Premium Access
View all detail and faqs for the H20-688_V1.0 exam
When the customer confirms that the project is complete, to ensure all parties understand and agree on the agreement’s content and to prevent potential misunderstandings and disputes, notify the customer of the completion-acceptance materials orally without signing the paper completion-acceptance report.
Options:
True
False
Exact Extract — Acceptance Upon Completion (PDF page 229, training slide 25)
The customer confirms the completion of the project and signs the completion acceptance report in written form.
In principle, the signing of the service completion report is the node for internal and external ETM completion.
Technical Deep Dive:
Formal project acceptance is an essential control activity in Huawei Digital Power service delivery.
Option B is correct because an oral notification cannot replace the required written completion-acceptance confirmation.
The completion-acceptance report provides objective evidence that the customer has reviewed and acknowledged the relevant project deliverables.
Depending on the project, these deliverables may include equipment installation records, commissioning results, quality inspection reports, defect rectification records, and relevant equipment handover documentation.
A properly executed acceptance process establishes the status of the delivered services and helps identify any outstanding contractual or technical obligations.
Written confirmation also improves traceability and reduces the risk of disputes concerning the completion date, acceptance criteria, outstanding defects, or the agreed scope.
The training material specifically requires the customer to confirm project completion and sign the acceptance report in writing.
Where an approved digital acceptance system is available, the applicable electronic authorization and record-retention procedures may also be used.
However, verbal communication alone does not satisfy the prescribed formal acceptance requirement.
Final verification: B.
If electrolyte leakage or structural deformation occurs, what should be done with the battery?
Options:
Check whether the structural deformation affects the installation.
Contact the installation engineer or professional O & M personnel immediately to remove or replace the battery.
Try to install the battery.
Check electrolyte leakage.
Exact Extract — Safety Operation Requirements 7/7: Electrolyte Contact Prevention (PDF page 190, training slide 49)
Electrolyte is corrosive and can cause irritation and chemical burns. In the case of electrolyte leakage or structural deformation, contact the installer or professional O & M personnel immediately to remove or replace the battery. Do not store the damaged battery near other devices or flammable materials and keep it away from non-professionals.
Technical Deep Dive:
Electrolyte leakage and structural deformation are serious indicators of potential battery damage and must be addressed immediately.
Option B is correct because it requires escalation to qualified installation or professional operation and maintenance personnel for appropriate removal or replacement.
Lithium-ion batteries contain electrochemical materials and internal structures that can become unsafe when exposed to impact, excessive heat, electrical faults, or other damaging conditions.
Electrolyte leakage can create chemical exposure hazards, while structural deformation may indicate damage to internal cells, separators, or electrical connections.
Such conditions may increase the risk of internal short circuits, overheating, gas release, or thermal runaway.
Option A is incorrect. Evaluating whether deformation affects installation is insufficient. A battery must not be considered safe merely because it can physically fit into the equipment.
Option C is incorrect. Attempting to install a damaged battery introduces unnecessary personnel and equipment risks.
Option D is incorrect. Inspecting electrolyte leakage alone does not constitute an adequate corrective action once leakage or structural deformation has already been identified.
Affected equipment should be isolated from normal handling activities, and the damaged battery must be kept away from unauthorized personnel and combustible materials.
Qualified personnel must follow the applicable battery manufacturer ' s handling and replacement procedures.
Final verification: B is directly supported by Huawei ' s battery safety requirements.
Which features of the emergency plan should be tested as part of an emergency drill?
Select All that Apply.
Options:
Sufficiency
Suitability
Necessity
Validity
Exact Extract — Prevent Proliferation, and Reduce Losses, Develop Emergency Plans, and Conduct Regular Drills (PDF page 273, training slide 28)
Make the customer/EPC/construction party/fire department be familiar with the product emergency items, check the adequacy, suitability, and effectiveness of the emergency plan, and check whether the departments and individuals involved in the plan are clear about their responsibilities, familiar with the emergency plan procedures, and emergency response capabilities.
Technical Deep Dive:
Emergency drills are conducted to determine whether emergency response arrangements can effectively control incidents and protect personnel, facilities, and the surrounding environment.
The training identifies three principal characteristics for evaluation: adequacy, suitability, and effectiveness.
Option A is correct. Sufficiency corresponds to adequacy. The emergency plan must provide sufficient resources, procedures, personnel, equipment, and organizational arrangements to respond to foreseeable emergencies.
Option B is correct. Suitability evaluates whether the emergency procedures and resources are appropriate for the actual operational environment and potential incident scenarios.
Option D is correct in the intended terminology. Validity is being used to represent the effectiveness of the emergency plan—whether its procedures can produce the required response outcomes under relevant conditions.
Option C is incorrect. Necessity is not one of the three emergency-plan characteristics specifically identified for evaluation in the training.
For energy-storage installations, emergency drills may evaluate personnel evacuation, emergency notification, equipment shutdown, firefighting coordination, incident isolation, and management of potential thermal-runaway conditions.
SQA personnel should supervise the implementation of the drill, verify that participating stakeholders understand their responsibilities, and ensure that weaknesses are documented and corrected.
Terminology qualification: Huawei uses effectiveness, whereas the answer option uses validity. These terms are not universally interchangeable in formal management-system terminology, so D reflects the intended examination mapping rather than an exact wording match.
Final verification: A, B, D.
According to the training materials, construction-site safety management can be classified into which categories?
Select All that Apply.
Options:
Behavior control
Safety technology management
Site and facility management
Safety organization management
Exact Extract — Basic Concepts of Safety Management: Dynamic Management and Control of the Behavior and Status of People, Objects, and Environments in Production (PDF page 153, training slide 12)
Safety management indicates the dynamic management and control of the behavior and status of all people, objects, and environments in production.
Safety management is the fundamental link to ensure that production is in the safest state. It is an important part of production management and a systematical science.
The construction site safety management can be divided into four aspects: safety organization management, site and facility management, behavior control, and safety technology management. The behavior and status of people, objects, and environments in production are managed and controlled respectively.
Technical Deep Dive:
Construction-site safety management requires a systematic framework covering organizational responsibilities, physical working conditions, personnel behavior, and technical risk controls.
Huawei identifies four complementary management categories.
Option A — Behavior control: This concerns the actions and conduct of construction personnel. It includes verifying compliance with safe operating procedures, preventing unauthorized operations, enforcing PPE requirements, and correcting unsafe behavior.
Option B — Safety technology management: This addresses engineering and technical measures used to control hazards. Examples include electrical isolation, protective grounding, safe lifting arrangements, equipment protection, and approved construction methods.
Option C — Site and facility management: This concerns the physical construction environment, including access control, safety barriers, equipment placement, temporary electrical installations, emergency exits, and safe material storage.
Option D — Safety organization management: This establishes the management structure and accountability necessary for effective EHS operations. Activities include assigning safety responsibilities, verifying personnel qualifications, providing training, conducting inspections, and coordinating emergency response.
These categories operate together. Organizational controls establish responsibilities, technical controls mitigate hazards, facility management maintains safe working conditions, and behavior control ensures that personnel follow approved requirements.
A weakness in any category can undermine the overall safety management system.
Final verification: All four options correspond directly to Huawei ' s construction-site safety management classification.
After receiving the equipment, verify that its outer packaging is intact. If it is not, only the SQA and the supervision engineer must assess the equipment status.
Options:
True
False
Exact Extract — Entry Management: Equipment and Materials Acceptance (PDF page 267, training slide 22)
The package is not intact. Communicate with the EPC/customer and owner about whether to further check and receive goods.
Do not install damaged devices or connect them to the network. Onsite rectification must be approved by the customer or owner and confirmed by the R & D department.
Technical Deep Dive:
Equipment acceptance involves verifying packaging integrity, delivery documentation, product specifications, quantities, and the physical condition of equipment.
The statement is false because assessment and acceptance decisions are not exclusively assigned to the SQA and supervision engineer.
When outer packaging is damaged, the project team must communicate with the EPC, customer, and owner to determine whether further inspection and acceptance should proceed.
The SQA identifies quality risks and verifies compliance with the acceptance procedure. The supervision engineer coordinates the relevant technical inspections and construction-related activities.
However, project stakeholders must participate in decisions concerning acceptance when shipping damage or packaging nonconformities are discovered.
If the investigation reveals damage to the equipment itself, the issue must be escalated according to the applicable replacement or repair procedure.
A damaged product must not be installed, energized, or connected to the operational network merely because it appears functional.
The key distinction is between identifying the damage, assessing its technical consequences, and authorizing acceptance or corrective action. These activities may involve different responsible parties.
Final verification: B. The word only makes the statement incorrect.
Service partner engineer A is assigned to resolve an issue on the customer’s live network. Which of the following operations are compliant?
Select All that Apply.
Options:
Engineer A must sign a non-disclosure agreement (NDA) and cannot disclose any confidential information obtained on the job or access data irrelevant to work.
During troubleshooting, engineer A asks R & D engineer B for assistance and shares the account authorized by the customer with engineer B for remote operations.
After handling the problem, engineer A sends a summary email about the onsite access of the project to remind the customer to change the account and password.
The customer is away from the site and the schedule is tight. Engineer A access the customer’s system after notifying the customer by phone.
Exact Extract — Cyber Security and Privacy Protection Compliance Requirements for Partners: Service Operations and Maintenance Management (PDF page 96, training slide 25)
Ensure that maintenance personnel sign a non-disclosure agreement (NDA) and do not disclose any confidential information obtained on the job or access data irrelevant to work.
Use accounts as authorized by customers. Do not share accounts, and ensure one account is only used by one person
Additional Extract — Customer Network Access and Data Processing (PDF page 95, training slide 24): Send a summary email about onsite access and remind customers of account and password change.
Technical Deep Dive:
Huawei ' s cybersecurity and privacy protection requirements establish strict controls for service personnel accessing customer production networks.
These controls protect customer information, preserve access accountability, and minimize the risk of unauthorized operations.
Option A is correct. Engineers must protect confidential information, comply with applicable nondisclosure obligations, and restrict their activities to the legitimate scope of assigned work.
Accessing unrelated customer data violates the principle of least privilege and may breach contractual or regulatory obligations.
Option B is incorrect. Customer-authorized credentials must not be shared between individuals. Even when an R & D engineer provides technical assistance, that engineer must use an appropriately authorized individual account or an explicitly approved access mechanism.
Shared credentials undermine accountability because activities cannot reliably be attributed to individual operators.
Option C is correct. After completing onsite access, the engineer should provide the required access summary and remind the customer to update the relevant credentials.
This supports access lifecycle management and reduces the risk associated with credentials that remain active after service completion.
Option D is incorrect. Phone notification alone is insufficient. Huawei requires customer authorization before accessing customer systems, with written authorization specified in the training requirements.
Urgent delivery schedules do not override customer authorization controls.
The governing principles include confidentiality, least privilege, individual accountability, authorized access, traceability, and timely removal of unnecessary access.
Final verification: A and C are explicitly supported by Huawei ' s cybersecurity compliance requirements.
Which of the following is not included in process quality control?
Options:
Quality spot-check
Construction process management
Environment management
Entry management
Exact Extract — Standard Delivery Framework for Project Implementation (PDF page 251, training slide 6)
The framework identifies the following activities under in-process quality control (IPQC):
Entry management
Construction process management
Acceptance quality control
Quality spot-check
Technical Deep Dive:
Huawei ' s standard delivery framework separates project quality management into distinct activities covering preparation, construction, and completion.
Option C is correct because environment management is not listed as a separate activity within the framework ' s defined IPQC grouping.
Environmental verification primarily establishes whether storage and installation conditions meet equipment requirements before equipment delivery or installation.
These checks include temperature, humidity, ventilation, installation space, foundations, and protection against water ingress.
Although environmental conditions continue to influence construction quality, the framework classifies the corresponding environment preparation and verification activities separately from its principal IPQC list.
Option A — Quality spot-check: SQA personnel perform inspections to identify installation defects, document nonconformities, and supervise corrective actions.
Option B — Construction process management: This includes monitoring construction implementation, compliance with technical specifications, and operational quality controls.
Option D — Entry management: This includes verifying equipment and material acceptance, packaging integrity, quantities, specifications, and damage conditions during delivery.
All three appear within the process quality control framework.
The distinction is organizational rather than suggesting that environmental management is unimportant.
Final verification: C is the expected answer under Huawei ' s specified IPQC classification.
SQA is the main owner of project quality within the quality team.
Options:
True
False
Exact Extract — Quality Team: Set Up a Quality Team Based on Project Quality Requirements and Determine the Responsibilities of Owners (PDF page 257, training slide 12)
PD: As the primary owner for project quality, the PD provides the overall project plan and coordinates construction parties to carry out work in an orderly manner, covering installation environment, warehousing environment, concurrent construction, cost protection, and implementation of quality and safety measures.
SQA: SQA is the direct owner of the service quality for the partners.
Technical Deep Dive:
Huawei ' s project quality management framework assigns different responsibilities to the Project Director (PD), Service Quality Assurance (SQA), supervision engineers, and installation engineers.
Option B is correct because the PD—not the SQA—is designated as the primary owner of overall project quality.
The PD coordinates the overall project plan, organizes delivery resources, manages construction interfaces, and ensures that project implementation proceeds according to defined requirements.
The SQA has a separate and important responsibility as the direct owner of partner service quality.
This role includes verifying personnel qualifications, monitoring the implementation of safety and quality measures, evaluating service performance, and promoting corrective actions when deficiencies are identified.
The supervision engineer is responsible for executing specified control activities, including site entry management, environment verification, construction process supervision, and quality inspections before equipment power-on.
Installation engineers must comply with the applicable technical procedures and perform installation activities according to the approved product guidance.
These responsibilities are complementary, but they are not interchangeable.
The distinction between primary project quality ownership and direct service quality ownership is essential for correct governance, accountability, and escalation.
An SQA professional must understand these boundaries to avoid assuming responsibilities that belong to the PD while still maintaining effective oversight of service quality.
Final verification: B. The PD is the primary owner of project quality; the SQA is the direct owner of partner service quality.
During installation, which of the following precautions must be observed to prevent equipment faults?
Select All that Apply.
Options:
Prevent liquid.
Prevent foreign objects.
Seal cable holes.
Do not move the equipment.
Exact Extract — Safety Operation Requirements 3/7: Protection Against Equipment Faults (PDF page 186, training slide 45)
If any liquid is detected inside the equipment, disconnect the power supply immediately and do not use the equipment.
Prevent foreign matter from entering the equipment during operations. Otherwise, equipment damage, load power derating, power failure, or personal injury may occur.
All cable holes must be sealed. Seal the used cable holes with sealing putty. Seal the unused cable holes with the caps delivered with the equipment.
Technical Deep Dive:
Proper equipment installation requires effective environmental protection and strict control of potential contamination sources. Huawei Digital Power equipment contains sensitive electronic components, power conversion circuits, control boards, electrical terminals, and cooling systems. Exposure to moisture, conductive debris, or environmental contaminants can compromise electrical insulation and operational reliability.
Option A is correct. Liquid entering equipment can cause short circuits, insulation failure, corrosion, and electrical arcing. Installation personnel must prevent water ingress, condensation, and accidental liquid exposure. If liquid is discovered inside equipment, the affected equipment must be isolated from its power supply and must not be operated until appropriate technical assessment and corrective action have been completed.
Option B is correct. Foreign objects such as metal shavings, screws, cable fragments, and conductive dust may bridge electrical contacts or obstruct cooling components. Such contamination can cause overcurrent, overheating, equipment derating, or complete power failure. Construction activities involving drilling or cutting must therefore include effective debris containment and cleaning.
Option C is correct. Both occupied and unoccupied cable openings require sealing. Sealing putty and manufacturer-supplied caps prevent dust, moisture, insects, and other contaminants from entering cabinets.
Option D is incorrect. Equipment movement is not universally prohibited during installation. Positioning, lifting, and handling equipment are legitimate installation activities when performed according to approved procedures and manufacturer requirements.
Final verification: A, B, and C are explicitly supported by the equipment-fault prevention requirements.
Which of the following is considered a quality feature?
Options:
Safety
Reliability
Serviceability
All of the above
Exact Extract — ISO 9000 Definition of Quality (PDF page 113, training slide 6)
ISO 9000 defines quality as the " degree to which a set of inherent characteristics fulfills requirements " .
– Inherent characteristics (such as appearance, shape, performance, maintainability and reliability), which is opposite to assigned characteristics (such as price, name and code).
– Quality is conformance to requirements.
– Requirements include demands and expectations of customers and other related parties.
Technical Deep Dive:
Quality is a multidimensional concept encompassing the characteristics that determine whether a product or service satisfies specified requirements and stakeholder expectations.
For Huawei Digital Power products, quality extends beyond basic functional performance to include operational safety, dependable service, and effective maintenance throughout the product lifecycle.
Option A — Safety: Safety is a fundamental quality characteristic because equipment must operate without exposing personnel, property, or the environment to unacceptable risks. Examples include electrical insulation, overtemperature protection, protective grounding, and battery safety controls.
Option B — Reliability: Reliability describes the ability of equipment to perform its required functions under specified conditions for a defined period. It is particularly important for UPS systems, energy-storage installations, and power conversion equipment.
Reliability may be evaluated through failure rates, availability, mean time between failures (MTBF), and other performance indicators.
Option C — Serviceability: Serviceability addresses how effectively equipment can be inspected, diagnosed, repaired, and restored to operational condition. It includes fault visibility, maintenance accessibility, service procedures, replacement efficiency, and technical support capabilities.
Effective serviceability reduces service restoration time and total lifecycle maintenance costs.
These characteristics are interconnected. Equipment that is reliable but difficult to maintain may still impose considerable operational risk. Similarly, products must provide required performance without compromising safety.
Final verification: D is correct because safety, reliability, and serviceability are all recognized product quality attributes.