Black Friday VIP Hour Limited Time 75% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code = simple75
Pass the Huawei HCIP 5G H35-651 Questions and answers with Dumpstech
Exam H35-651 Premium Access
View all detail and faqs for the H35-651 exam
Which of the following triggers must be configured to deliver policies through the N7 interface?
Options:
IPCAN_EST
PRA_CH
PLMN_CH
US_RE
Exact Extract
“Modularized network functions facilitate function decoupling and integration. Decoupled network functions are abstracted as network services, which can be independently expanded, evolved, and deployed on demand.”
— Huawei Training Material, SBA Network Architecture, page 93.
Technical Deep Dive
The N7 interface connects the Session Management Function (SMF) and Policy Control Function (PCF). Through N7, the PCF provides session policy decisions and receives information about session-related events.
Three options are defined N7 policy control request triggers.
B. PRA_CH: The PRA_CH trigger indicates a change in the UE's presence within a Presence Reporting Area. It can be used when policy behaviour depends on whether a subscriber enters or leaves a designated geographical area.
C. PLMN_CH: The PLMN_CH trigger indicates that the serving Public Land Mobile Network has changed. This allows the PCF to reassess policy conditions associated with the subscriber's serving network.
D. US_RE: The US_RE trigger indicates that usage-related information must be reported, such as when a usage-monitoring threshold is reached. This can support policy updates based on subscriber resource consumption.
Why A is incorrect: IPCAN_EST is associated with legacy EPC IP-CAN session establishment policy events and is not one of the standardized 5G N7 PolicyControlRequestTrigger enumeration values.
3GPP TS 29.512 explicitly defines PRA_CH , PLMN_CH , and US_RE as N7 policy control request triggers. These triggers are configured according to policy requirements. They are not universally mandatory for every N7 session policy association; initial policy creation can occur without all three.
Which IE in the Registration Request message indicates the UE's capability to access a 4G network?
Options:
S1 UE network capability
Payload container
NAS message container
5GMM capability
Exact Extract
“As specified in the 3GPP specifications, there are two standards for 5G network architectures: standalone (SA) mode and non-standalone (NSA) mode. In NSA mode, eNodeBs and gNodeBs coexist on the radio access network (RAN), and the EPC or 5GC is used as the core network.”
— Huawei Training Material, 5G Networking Architecture, page 82.
Technical Deep Dive
The 5GMM capability information element carries capabilities related to the UE's operation in the 5G mobility-management framework. An important field is the S1 mode supported bit. This bit indicates whether the UE supports operation in the EPC NAS environment associated with LTE access.
The relevant values are S1 mode = 0: S1 mode not supported and S1 mode = 1: S1 mode supported .
When the UE supports the appropriate LTE/EPC functionality, this information assists the network with mobility and interworking decisions.
The distinction between options A and D is important. The S1 UE network capability IE provides more detailed EPC-related security and network capability information. However, the specific indication of whether S1 mode is supported is carried in the 5GMM capability IE.
The Payload Container and NAS Message Container serve different purposes. They transport information associated with NAS signalling and do not independently define the UE's 4G access support.
3GPP TS 24.501 defines the S1 mode support bit within the 5GMM capability information element. Therefore, D is correct.
Which of the following messages does the SMF use to provide the UPF with its assigned IP address during a UE-initiated PDU session establishment procedure?
Options:
PFCP Session Modification Request
PFCP Session Establishment Request
PFCP Session Report Request
PFCP Association Update Request
Exact Extract
“Session management; UE IP address allocation; User-plane function selection and control; UPF service control; QoS and policy execution; Downlink data arrival notification.”
— Huawei Training Material, Main Network Functions of the 5GC, page 95.
Technical Deep Dive
The PFCP Session Establishment Request is used by the SMF to establish a session context on the UPF through the N4 interface. During UE-initiated PDU session establishment, the SMF selects an appropriate UPF and programs the forwarding rules needed to process the subscriber's user-plane traffic.
Where the SMF allocates the UE IP address, that information can be delivered to the UPF in the PFCP Session Establishment Request.
Important PFCP information elements include CP F-SEID identifying the control-plane PFCP session, Create PDR defining packet detection rules, Create FAR defining packet forwarding actions, Create QER defining QoS enforcement rules, and UE IP Address identifying the subscriber address associated with applicable packet detection rules.
For example, the SMF can configure a PDR containing the UE IP address so that the UPF can identify packets belonging to the relevant subscriber session. The UPF responds with a PFCP Session Establishment Response, confirming the session establishment result.
The PFCP Session Modification Request is subsequently used when existing forwarding information must be changed, such as after the SMF receives the gNodeB's downlink tunnel endpoint information. A PFCP Session Report Request is generated by the UPF to report relevant events, while a PFCP Association Update Request manages association-level information.
The session establishment and modification procedures are specified in 3GPP TS 29.244. Therefore, B is correct.
Which of the following is not a characteristic of network slices?
Options:
On-demand deployment
Shared or dedicated NFs
Control and user plane separation (CUPS)
E2E SLA assurance
Exact Extract — Network Slicing
“Network slicing enables operators to slice a network into multiple virtual networks on the same hardware infrastructure to allocate resources as required and flexibly combine capabilities. This technology enables different requirements of diverse services to be met. When new requirements are raised but the network cannot meet them, operators only need to virtualize a new slice to launch services quickly, without needing to deploy a new network.”
— Huawei Training Material, Differentiated 5G Service Requirements, page 21.
Technical Deep Dive
Network slicing allows an operator to create multiple logical networks over shared physical infrastructure. Each network slice can be designed for a particular service profile, customer group, or operational requirement.
A. On-demand deployment: Network functions and resources can be instantiated or scaled according to service requirements, enabling flexible network deployment.
B. Shared or dedicated NFs: Network slices may use dedicated network function instances, shared instances, or a combination of both. For example, different slices may share an AMF while using separate SMF and UPF instances to satisfy specific service requirements.
D. End-to-end SLA assurance: An end-to-end network slice may coordinate resources across the RAN, transport network, and core network to support particular service-level objectives. These can include throughput, latency, reliability, and isolation requirements.
C. Control and User Plane Separation: CUPS separates the network control-plane functions from user-plane packet processing. In 5G, the SMF controls session management and UPF selection, while the UPF forwards user traffic. CUPS supports flexible placement of these functions and can facilitate network slicing, but it is an architectural principle rather than a defining characteristic of network slicing.
A 5G system can implement CUPS without provisioning multiple logical network slices. Therefore, C is correct.
Which of the following NFs produces the session binding data that is stored on the BSF?
Options:
AF
BSF
SMF
PCF
Exact Extract
“All network functions on the control plane interact with each other through service-based interfaces. A service can be invoked by multiple network functions, reducing the coupling degree defined for interfaces between network functions.”
— Huawei Training Material, SBA Network Architecture, page 93.
Technical Deep Dive
The Binding Support Function (BSF) maintains binding information that allows network functions to locate the appropriate Policy Control Function (PCF) for a subscriber session. The PCF produces and registers the relevant binding information.
The operation is performed using the Nbsf_Management_Register service. A simplified registration procedure is: PCF sends Nbsf_Management_Register to BSF, and BSF returns a Registration Response.
The binding data can include the subscriber's IP address or other session-related identifiers, together with information identifying the responsible PCF. This mechanism is essential in networks containing multiple PCF instances.
For example, when an Application Function requires policy interaction for an existing PDU session, the BSF can help identify the PCF that manages that session.
The AF consumes policy services but does not normally register the PCF's session binding information. The BSF stores and manages binding records but is not the network function that originates the session's PCF binding. The SMF performs session management and exchanges policy information with the PCF, but the PCF registers its binding with the BSF.
3GPP TS 29.521 defines the Nbsf_Management_Register operation initiated by the PCF. Therefore, D is correct.
Which of the following is not an advantage of VM-based containers?
Options:
Services can be isolated between tenants.
Containers start up fast, and provide performance approximating that of bar e-metal containers.
The container platform can be decoupled from NFVI.
NFVI can be shared with existing VNFs.
Exact Extract
“Microservice-based software architecture: Lego-style service combination is more suitable for flexible 5G services.”
— Huawei 5G Training Material, 5G Core Network Architecture, page 98.
Technical Deep Dive
VM-based containers deploy containerized applications inside virtual machines rather than directly on physical servers. The infrastructure typically consists of physical hardware, a virtualization layer, guest operating systems, and a container runtime.
A. Tenant isolation: VM-based containers benefit from VM-level isolation. Different tenants can be assigned separate virtual machines, providing stronger security boundaries than relying exclusively on container namespaces.
C. Infrastructure decoupling: The virtualization layer abstracts the underlying server hardware and networking resources. Consequently, container management components can operate through standardized virtual infrastructure interfaces rather than depending on specific physical hardware.
D. Shared NFVI: VM-based container deployments can reuse existing NFVI environments alongside traditional VNFs. This reduces the need to introduce a separate physical infrastructure platform.
Why B is incorrect: VM-based containers start quickly because application containers share the guest operating system kernel. However, their packet-processing performance is still affected by the virtual machine and hypervisor layers. Bare-metal containers execute directly over the physical server's operating system and can avoid portions of the virtualization overhead.
Consequently, bare-metal deployments are generally better suited to workloads with stringent packet-processing or latency requirements. Huawei's container architecture comparison explicitly distinguishes VM-based container performance as similar to VMs, while bare-metal container performance is similar to physical machines.
In high-throughput 5G UPF deployments, technologies such as DPDK, SR-IOV, NUMA-aware placement, and CPU pinning can mitigate virtualization overhead, but they do not make the two architectures inherently equivalent. Therefore, B is correct.
In UPCF 21.0, which of these commands is used to add links on the Gx interface?
Options:
ADD PPCEFL
ADD GXLNK
ADD HTTPLNK
ADD DNLNK
Exact Extract — Policy Control Function
“QoS policy control; Charging control.”
— Huawei 5G Training Material, Main Network Functions of the 5GC, PCF section, page 96.
Technical Deep Dive
The intended Huawei UPCF command is ADD GXLNK . The Gx interface is a Diameter-based interface traditionally used between the Policy and Charging Rules Function (PCRF) and the Policy and Charging Enforcement Function (PCEF) in LTE/EPC networks.
Huawei's Unified Policy Control Function (UPCF) combines support for different generations of policy-control interfaces, allowing operators to manage policy control across both LTE and 5G environments.
The Gx interface supports policy and charging control interactions, including Policy and Charging Control (PCC) rule provisioning, QoS policy enforcement instructions, charging-rule management, session-related policy updates, and policy authorization and control messages.
The ADD GXLNK command is intended to establish a Gx signalling link configuration. It is important to distinguish Gx from the 5G N7 interface. Gx uses Diameter signalling for interactions with EPC enforcement entities, whereas N7 uses the service-based architecture to exchange session policy control information between the PCF and SMF.
The other commands do not specifically identify Gx link creation. For operational validation, engineers should check peer IP connectivity, Diameter peer and realm settings, application identifiers, and the operational status of the configured Gx links.
Verification qualification: The interface architecture is established, but the precise ADD GXLNK syntax is not reproduced in the available uploaded PDF. The selected command is the intended product-specific answer.
In UNC 21.0, which command adds conditions for the target NF that is to be subscribed to?
Options:
ADD SUBCONDITION
ADD NFPROFILE
ADD NRF
ADD NRFPARA
Exact Extract
“Modularized network functions facilitate function decoupling and integration. Decoupled network functions are abstracted as network services, which can be independently expanded, evolved, and deployed on demand.”
— Huawei 5G Training Material, SBA Network Architecture, page 93.
Technical Deep Dive
The intended Huawei UNC command is ADD SUBCONDITION . The Network Repository Function supports NF registration, discovery, and status subscription services. A network function can subscribe to notifications concerning other NF instances that meet specified criteria.
For example, an SMF may need to track the availability of a particular type of PCF instance. Rather than repeatedly polling the NRF, the subscribing NF can establish a notification subscription with selection criteria. These criteria may include NF type, NF instance identifier, service information, or other supported profile attributes.
ADD SUBCONDITION defines the subscription conditions used to identify target NFs. When a registered NF matching the configured conditions changes its operational status or registration information, the NRF can issue a notification to the relevant subscriber.
This mechanism improves service discovery efficiency and helps control-plane functions react to changes in network function availability.
ADD NFPROFILE concerns NF profile configuration rather than the specific subscription condition. ADD NRF relates to NRF configuration. ADD NRFPARA relates to NRF parameters.
3GPP TS 29.510 defines the NRF NF status subscription service and associated subscription conditions. In Huawei deployments, this configuration must be consistent with the subscribing NF's notification endpoint and permitted NF selection criteria. Therefore, A is correct.
Which message does the AMF use to retrieve network slice subscription data from the UDM during initial 5G registration?
Options:
Nudm_SDM_Get
Nudm_SDM_Subscribe
Nudm_UECM_Registration
Nudm_SDM_Info
Exact Extract
“All network functions on the control plane interact with each other through service-based interfaces. A service can be invoked by multiple network functions, reducing the coupling degree defined for interfaces between network functions.”
— Huawei Training Material, SBA Network Architecture, page 93.
Technical Deep Dive
During initial 5G registration, the AMF retrieves subscriber information from the UDM to determine the services and network slices authorized for the UE. The Nudm_SDM_Get service operation is used to obtain subscription information.
Network slice subscription data identifies the S-NSSAIs that the subscriber is authorized to use. The subscription information may also include the default subscribed S-NSSAIs that are relevant to network slice selection.
A representative HTTP request is GET /nudm-sdm/v2/{supi}/nssai . The exact API version depends on the applicable 3GPP release.
The AMF uses the subscription information together with the Requested NSSAI, local configuration, and applicable NSSF selection results to determine the Allowed NSSAI.
Why the other options are incorrect: Nudm_SDM_Subscribe establishes a subscription for notifications about changes to subscriber data. It is not the primary operation for initially retrieving that data. Nudm_UECM_Registration registers the serving AMF with the UDM for UE context management. Nudm_SDM_Info is not the appropriate retrieval operation for this procedure.
This separation between data retrieval, subscription notification, and UE context registration is fundamental to the 5G service-based architecture. Operational troubleshooting should verify the SUPI, UDM resource URI, HTTP response status, provisioned S-NSSAIs, and AMF slice-selection configuration. Therefore, A is correct.
Which statement below is incorrect regarding the JSON and COMMOND configuration modes for NF instance information?
Options:
In JSON mode, the length of NF instance information is limited.
COMMOND is not recommended because it is complicated and is not applicable to commercial live networks.
JSON is applicable to simplified configuration.
In COMMOND mode, the configuration parameters are highly extensible.
Exact Extract — Network Function Architecture
“Modularized network functions facilitate function decoupling and integration. Decoupled network functions are abstracted as network services, which can be independently expanded, evolved, and deployed on demand.”
— Huawei Training Material, SBA Network Architecture, page 93.
Technical Deep Dive
Huawei's service-based network architecture allows NF instance information to be configured and maintained through structured configuration mechanisms. The distinction in this question concerns the representation and extensibility of NF instance configuration information.
JSON configuration mode uses JavaScript Object Notation to represent structured parameters. It is useful for simplified NF instance configuration, particularly where a standardized configuration structure can be represented as one JSON object. JSON can express nested objects, arrays, identifiers, and service attributes, although a particular Huawei configuration interface may impose limits on the size of a single submitted configuration object.
COMMOND configuration mode, as named in this question, represents an alternative command-oriented Huawei configuration mechanism. Its intended advantage is more granular configuration and extensibility where individual parameters or configuration objects must be managed independently.
Option B makes an absolute claim that COMMOND is unsuitable for commercial live networks. Configuration complexity does not, by itself, make an operational configuration method unsuitable for production. Production suitability depends on Huawei's documented support, version compatibility, configuration controls, and operational procedures.
Options C and D are consistent with the intended distinction between simplified JSON configuration and more extensible command-oriented configuration. Option A should be interpreted as a Huawei implementation limitation rather than a limitation inherent to the JSON format.
Verification warning: The exact JSON/COMMOND behaviour, including any length restriction, requires the Huawei UNC 21.0 NF instance configuration reference. The available training PDF confirms modular SBA concepts but does not establish these two product-specific modes. Consequently, B is the most defensible intended answer, not a fully verified command-reference finding.