Pass the Juniper JNCIS-ENT JN0-351 Questions and answers with Dumpstech

In OSPF, the state of the neighbor relationship is determined by the exchange of OSPF packets between routers 1 .  The state “2Way” as shown in the exhibit indicates that bi-directional communication has been established between the two OSPF routers 1 .  This is the normal state for a neighbor that is not the Designated Router (DR) or Backup Designated Router (BDR) on a broadcast, non-broadcast multi-access (NBMA), or point-to-multipoint network 1 .  These neighbors are often referred to as " DRothers " 1 . Therefore, option B is correct.

The BGP attribute that you would use to forward all Internet traffic through the R1 device is the  local preference 1 .

The local preference is an attribute that is used within an autonomous system (AS) and exchanged between iBGP routers 1 .  It is used to select an exit point from the AS 1 .  The path with the highest local preference is preferred 1 .  By setting a higher local preference for the routes received from R1, you can make R1 the preferred exit point for all Internet traffic 1 .