Pass the Nutanix NCM-MCI NCP-MCI-6.10 Questions and answers with Dumpstech

Nutanix performance troubleshooting guidelines highlight CPU Ready Time as a key indicator of CPU contention. The documentation explains:

“High CPU Ready Time indicates that vCPUs are waiting to be scheduled on physical cores due to host CPU saturation or CPU overcommitment.”

CPU Ready Time doesnotrelate to storage issues or CVM sizing. Instead, it indicates that the hypervisor cannot schedule VM CPU operations promptly.

Internal extracts clearly describe the next diagnostic step:

“When CPU ready metrics rise, the first step is to check physical host CPU utilization to confirm whether the host is oversubscribed or running at high CPU usage.”

If the host is overloaded, remediation includes distributing VMs across hosts, reducing vCPU count on oversized VMs, or adding compute resources.

Other options are irrelevant:

Memory oversubscription is unrelated to CPU Ready Time.

SSD capacity affects storage latency, not CPU scheduling.

CVM CPU counts do not cause VM CPU Ready Time; CVM resource misconfiguration affects cluster services, not guest VM scheduling.

Thus, reviewing host CPU utilization is the correct next step.

When the maximum instance count of retained reports is reached, Nutanix automatically deletes the oldest report to accommodate the new one.

From theNutanix Enterprise Cloud Administration (ECA)course materials:

“To ensure storage and performance efficiency, Nutanix reporting limits the number of stored reports. If this maximum is reached, the oldest report instance is automatically deleted to make space for new reports.”

Active-Active bonding allows multiple network interfaces to be used simultaneously, improving bandwidth and redundancy.

Option B (Active-Active) is correct:

This mode enablesload balancing across all available adapters, providinghigher throughput and fault tolerance.

Option A (No Uplink Bond) is incorrect:

Without a bond, VMscannot benefit from multiple adapters.

Option C (Active-Active with MAC pinning) is incorrect:

MAC pinningbinds traffic to a single NIC, limiting bandwidth distribution.

Option D (Active-Backup) is incorrect:

This modeonly provides failover, not increased bandwidth.

Nutanix storage architecture uses distributed data paths, where each vDisk represents a distributed logical object. The performance best practices for databases state:

“Multiple vDisks provide parallelism across the Nutanix storage stack, increasing I/O queue depth and distributing operations across multiple CVMs.”

Also, the guidance for Linux-based database workloads specifies:

“Using LVM striping across multiple vDisks increases throughput by merging multiple I/O channels and enhancing parallel read/write operations.”

Thin vs thick provisioning is irrelevant for performance in a Nutanix environment, as both types deliver identical I/O performance due to the metadata-driven storage engine.

Thus, database performance benefits from additional vDisks and striping across them.

A single vCPU is likely causing a bottleneck, limiting the VM’s ability to process I/O requests efficiently.

Option D (Increase the VM’s number of vCPUs) is correct:

Windowsrequires sufficient CPU resourcesto handle disk and network operations.

Adding more vCPUs allows the VM to process more I/O operations simultaneously, improving performance.

Option A is incorrect:

AdditionalvSCSI controllers are only useful for very high disk I/O workloads.

Option B is incorrect:

Balance-TCP applies to network traffic, not storage performance.

Option C is incorrect:

CVM resources do not directly affect individual VM performance.

Nutanix requires thatall cluster components synchronize time using an external NTP (Network Time Protocol) server.

Option A (Adding an external NTP server) is correctbecause Nutanix best practices recommend using anexternal time source to prevent clock drift between cluster nodes.

Option B (DNS server IP) is incorrect: ADNS server does not provide NTP services.

Option C (Server with DNS hostname) is incorrectunless the DNS hostnameresolves to an NTP server.

Option D (IP of the Domain Controller) is incorrectbecausenot all domain controllers provide NTP servicesunless explicitly configured.

https://portal.nutanix.com/page/documents/details?targetId=Nutanix-Security-Guide-v6_10:mul-configure-data-in-transit-encryption-pc-t.html

"Ensure that port 2009 is open between the Prism Central instances for the KMS cluster to communicate."This is explicitly stated in the "Firewall rules for Data-in-Transit Encryption" section for Prism Central.

Technical Context:

Port 2009 is used by ZooKeeper (the coordination service for the KMS cluster) in Scale-Out Prism Central deployments.

DiTE in Prism Central relies on a dedicated KMS cluster that synchronizes encryption keys across PC instances using this port.

Firewall blocks on port 2009 break KMS quorum, preventing key exchange and causing DiTE to fail.

Upgrading an AHV host with GPUs requires that the correct GPU drivers be manually uploaded to LCM, as GPU firmware is not updated automatically.

Option C (Use Direct Uploads to upload appropriate driver bundles) is correct:

LCM does notautomatically fetch GPU drivers.

The administrator mustdownload and manually upload the appropriate firmware bundlebefore upgrading.

Option A is incorrect:

Agent VMs are not requiredfor GPU updates.

Option B is incorrect:

Running LCM indark site mode does not impact GPU firmware updates.

Option D is incorrect:

Updating NCCis a best practice but does not resolve GPU driver issues.

Within Nutanix Recovery Plans, IP address transformations are handled through an automated mechanism known asIP Address Mapping. The documentation describes two methods: fixed mappings and offset-based mappings.

Offset-based mapping allows administrators to maintain consistent host identity attributes such as the last octet while shifting only the subnet portion during DR failover. The internal guidance states, “Offset-based mapping enables automatic recalculation of target IP addresses using offsets applied to source subnets, allowing preservation of host-specific octets across networks.”

Custom scripts are possible but not recommended because Nutanix already provides a built-in, automated IP transformation system. Editing IPs inside VMs after failover is operationally expensive and defeats the purpose of an orchestrated DR workflow. IPAM is useful for dynamic IP assignment but does not preserve the last octet mapping requirement.

Thus, Offset-based IP mapping is the correct mechanism for this requirement.

To ensureVM high availability (HA) in the event of a node failure, the administrator mustenable HA Reservation (Option B)in Prism Element.

High Availability (HA) in Nutanix ensures that VMs restart on another available node if the host they are running on fails.

Option A (Redundancy Factor 3)affectsstorage redundancy, not VM failover.

Option C (Protection Domains)is related todisaster recovery (DR), not local HA failover.

Option D (RF1 Storage Container)would reduce fault tolerance and is not recommended for production environments.