See mapping
Exhibit item
Correct match
100 Gb, 3 m, data center switches
Direct Attach Copper (DAC) cable
1 Gb, 30 m, access switch to desktop
Cat 5e cable
10 Gb, 60 m, distribution to access switch
Cat 6a cable
1 Gb, 2 km, between buildings
Single-mode fiber
Comprehensive and Detailed Explanation
HPE Press guide context | PDF page 43 | HPE Press, Aruba Certified Associate – Campus Access Official Certification Study Guide
Technical Deep Dive — Reconstructed (Original Chat Text Not Recoverable)
The 100-Gb/s three-meter switch interconnect is best served by a supported DAC; 1-Gb/s at 30 meters can use Cat 5e; 10-Gb/s at 60 meters requires suitable Cat 6a; and a two-kilometer 1-Gb/s inter-building connection requires compatible single-mode optical fiber. Optics must match fiber type, speed, wavelength, and distance.
The exhibit is a matching question: each original item must be paired with the applicable protocol, medium, security function, or address classification. The answer table below records the intended correspondence without changing the source exhibit.
In campus network design, a successful decision must satisfy the customer's capacity, topology, physical environment, and lifecycle constraints.
For example, a campus may have sufficient equipment for today but require additional switch ports, PoE budget, or wireless capacity as its user population grows.
A strong verification step is to compare the expected outcome with operational status before and after the change. This confirms not only that a configuration was accepted, but also that the required service actually functions.