Pass the ASIS Physical Security Professional ASIS-PSP Questions and answers with Dumpstech

During a security survey, plan drawings provide the layout of a facility, showing the position of walls, doors, windows, corridors, and other structural elements. These drawings serve as the primary reference for determining the placement and coverage of security devices such as cameras, access control points, sensors, and alarms.

Elevation drawings depict vertical surfaces and are used primarily for understanding façade or wall-mounted equipment placement.

Details drawings provide component-level specifications but do not give the full spatial context.

Riser diagrams illustrate electrical or network paths vertically through a building and help with cabling but not with overall device location planning.

Plan drawings give a comprehensive, horizontal layout view, which is essential for surveyors to accurately locate and document all security devices in relation to the facility’s operational spaces, consistent with ASIS PSP guidance.

This definition matches the U.S. Department of State and ASIS definitions of terrorism. It highlights the political and psychological components of terrorism, including the targeting of civilians and the intent to instill fear or send a political message.

Physical security refers to measures taken to protect personnel, equipment, and property from threats such as theft, vandalism, and natural disasters. This includes the use of locks, barriers, surveillance systems, access controls, and emergency response planning. It is a foundational element of organizational security strategy.

Electronic eavesdropping involves the unauthorized interception or monitoring of digital data and communications, including tapping into communication lines. This can involve accessing private messages, data streams, or other electronic communications as they travel across networks.

War driving (B) refers to searching for unsecured Wi-Fi networks, not line tapping.

Digital beating (C) and Standard digitizing (D) are not recognized cybersecurity terms.

Controlled areas are secure zones that restrict access to authorized personnel and vehicles only. These areas may include military zones, secure corporate facilities, or sensitive operational spaces where access control is enforced through badges, guards, surveillance, or barriers.

Terminal operations (A) refers to logistical or transportation hubs.

Surveillance (B) is a monitoring method, not a restricted area itself.

Total programs (C) is not a recognized security term.

Performance testing typically involves precise measurement using calibrated instruments or devices to ensure systems meet specified performance criteria (e.g., camera resolution, sensor range, alarm response time).

A (Operational) testing checks usability.

C (Subsystem) testing targets individual components.

D (Post-maintenance) confirms system functionality after servicing.

The correct answer is C. Equipment performance testing.

In PSP physical security implementation, testing is used to verify that installed security equipment and systems actually perform according to required functional and performance objectives. The ASIS PSP Body of Knowledge includes functional requirements, performance requirements, success metrics, commissioning, and final acceptance testing as part of physical security system design and implementation.

Equipment performance testing is the specific type of testing used to determine whether equipment or a system is functional, has adequate sensitivity, and meets its design and performance objectives. This matches the wording of the question directly. Physical security testing guidance also describes security system performance testing as determining whether security equipment is functional, has adequate sensitivity, and meets design and performance objectives under operating conditions.

The other options are not the best answer:

A. Factory acceptance testing is normally conducted before delivery or installation to verify equipment at the factory or vendor stage.

B. Reliability performance testing focuses more on dependability, availability, or continued operation over time.

D. Site acceptance testing verifies the installed system at the actual site, but the wording about functionality, sensitivity, and design/performance objectives specifically describes equipment performance testing.

Therefore, the correct answer is C. Equipment performance testing.

Low-pressure sodium (LPS) lamps emit a nearly monochromatic yellow light, which severely limits color rendition. This makes them unsuitable for CCTV surveillance where accurate color reproduction is needed. They are, however, energy efficient and used in some outdoor lighting applications where color accuracy is not critical.

B (Incandescent), C (Fluorescent), and D (Metal halide) all offer better color rendition than LPS lamps, with metal halide being the best for color fidelity.

Project management principles emphasize balancing scope, time, and cost, often referred to as the project management “triple constraint” or “iron triangle.”

Scope defines the work required to complete the project successfully, including deliverables, system specifications, and operational objectives.

Time represents the project schedule and deadlines for completing tasks, phases, or milestones.

Cost encompasses budgetary limits, including labor, materials, equipment, and contingencies.

A project manager must continuously monitor and adjust these factors to ensure that changes in one area do not negatively impact the others. For example, expanding scope without adjusting time or cost can jeopardize project success. This approach aligns with PSP guidance for security system projects, where maintaining balance among scope, schedule, and budget is critical to delivering an effective and operationally viable security system.

Comprehensive Detailed Explanation:

During the planning phase of a physical protection system, key deliverables include:

Preliminary design: Conceptual plans showing system layout and strategy.

Drawings: Visual representations that help in communicating system intent and scope.

These work products set the foundation for detailed design and implementation.

A, B, and C include elements used later in the process (procurement, budgeting).