Pass the Cisco CCNP Data Center 300-610 Questions and answers with Dumpstech

Refer to the exhibit.

An engineer must connect the four-port Cisco UCS VIC adapter to the fabric extenders. Which connectivity implements a port-channel standalone mode?

A)

B)

C)

D)

An engineer is implementing a Cisco UCS environment. The system must aggregate all vNICs into a single policy and consistently enforce node disassociation across the cluster. Which two UCS policies meet these requirements? (Choose two.)

A company’s data center is currently running on a traditional SAN architecture with Cisco UCS C200 M5 Blade Servers, producing 1000 IOPS The SAN is becoming a performance bottleneck, so management decided to implement a new solution to provide better performance and scalability. The preferred solution must meet these requirements:

•Provide at least 10x the performance of the current SAN

•Provide up to 100 Gbps of throughput per node

•Be easily scalable to meet the future needs of the enterprise

Which solution must the company deploy to meet the requirements9

An engineer deploys VMware ESXi hypervisor on blade servers. The virtual networking is managed by Cisco Nexus 1000V Series Switches.

Which configuration aligns with Cisco recommended practices for providing high availability and a maximum throughput to the VMware ESXi hosts?

An engineer must design the compute portion of a data center environment. The environment includes:

* direct-attach Fibre Channel storage array with four 32 G Fibre Channel ports per controller

* Cisco UCS B-series servers equipped with Cisco UCS IOM 2408 Fabric Extenders

* Cisco 6454 Fabric Interconnects

The fabric interconnects conned to the LAN via 100G ports, the SAN via 32 G Fibre Channel ports, and the IOM 2408 via 10 G ports. Which storage connectivity strategy must the engineer choose?

A network architect must design a large-scale Cisco SAN topology. The customer has a limited budget, so a design that provides use of resources is required. To support this requirement, the architect to share array ports, ISL, and line card bandwidth. The customer has also presented these additional considerations:

The customers plans to expand the network by 10% over the next two years.

The customer’s policy requires physically separated infrastructure to support high availability.

Which solution should be used to meet these requirements?

An engineer must interconnect two data centers to support the dynamic virtual machine migration. The data centers are currently interconnected using an IPv4 network. However, the data piano encapsulation of the underlay network is expected to change next year. To meet the VM migration requirement, the solution must track MAC route changes, update all other remote devices simultaneously and prevent excessive MAC flapping with broadcast and unicast traffic loops. The company must also use networking equipment from different manufacturers to prevent vendor-locking. Which solution meets these requirements?

Which vNIC/vHBA Placement policy should be selected in Cisco UCS Manager to ensure that only dynamic and static vNICs and vHBAs are explicitly assigned to the policy?

Which two paths are provided by deploying an OOB management network in a data center that uses Cisco Nexus switches? (Choose two.)

A network engineer needs to design Layer 2 connectivity for a subnet between two data centers using VXLAN with Cisco Nexus switches. The engineer must ensure seamless host mobility and optimal first-hop routing. Which gateway MAC attribute must be synchronized across both data centers?