Spring Sale Limited Time 75% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code = simple75
Pass the CompTIA Network+ N10-009 Questions and answers with Dumpstech
A junior network administrator is auditing the company network and notices incrementing input errors on a long-range microwave interface. Which of the following is the most likely reason for the errors?
A network technician needs to resolve some issues with a customer's SOHO network. The
customer reports that some of the PCs are not connecting to the network, while others
appear to be working as intended.
INSTRUCTIONS
Troubleshoot all the network components.
Review the cable test results first, then diagnose by clicking on the appropriate PC,
server, and Layer 2 switch.
Identify any components with a problem and recommend a solution to correct each
problem.
If at any time you would like to bring back
the initial state of the simulation, please
click the Reset All button.
A computer network diagram with many boxes and text AI-generated content may be incorrect.After a recent merger, a large number of alerts are coming in regarding extremely high utilization. Which of the following should be generated to help inform new alerting requirements?
An administrator needs to configure an IoT device with a /21 subnet mask, but the device will only accept dotted decimal notation. Which of the following subnet masks should the administrator use?
A network engineer configures a new switch and connects it to an existing switch for expansion and redundancy. Users immediately lose connectivity to the network. The network engineer notes the following spanning tree information from both switches:
Switch 1
Port State Cost
1 Forward 2
2 Forward 2
Switch 2
Port State Cost
1 Forward 2
2 Forward 2
Which of the following best describes the issue?
A network administrator is troubleshooting issues with a DHCP server at a university. More students have recently arrived on campus, and the users are unable to obtain an IP address. Which of the following should the administrator do to address the issue?
A systems administrator is configuring a new device to be added to the network. The administrator is planning to perform device hardening prior to connecting the device. Which of the following should the administrator do first?
A technician needs to quickly set up a network with five wireless devices. Which of the following network types should the technician configure to accomplish this task?
A medical clinic recently configured a guest wireless network on the existing router. Since then, guests have been changing the music on the speaker system. Which of the following actions should the clinic take to prevent unauthorized access? (Select two).
A network administrator suspects users are being sent to malware sites that are posing as legitimate sites. The network administrator investigates and discovers that user workstations are configured with incorrect DNS IP addresses. Which of the following should the network administrator implement to prevent this from happening again?
A detective is investigating an identity theft case in which the target had an RFID-protected payment card issued and compromised in the same day. The only place the target claims to have used the card was at a local convenience store. The detective notices a video camera at the store is placed in such a way that customers' credentials can be seen when they pay. Which of the following best explains this social engineering technique?
A company wants to implement data loss prevention by restricting user access to social media platforms and personal cloud storage on workstations. Which of the following types of filtering should the company deploy to achieve these goals?
A network technician replaced an access layer switch and needs to reconfigure it to allow the connected devices to connect to the correct networks.
INSTRUCTIONS
Click on the appropriate port(s) on Switch 1 and Switch 3 to verify or reconfigure the
correct settings:
· Ensure each device accesses only its
correctly associated network.
· Disable all unused switchports.
. Require fault-tolerant connections
between the switches.
. Only make necessary changes to
complete the above requirements.
A customer is adding fiber connectivity between adjacent buildings. A technician terminates the multimode cable to the fiber patch panel. After the technician connects the fiber patch cable, the indicator light does not turn on. Which of the following should a technician try first to troubleshoot this issue?
You have been tasked with implementing an ACL on the router that will:
1. Permit the most commonly used secure remote access technologies from the management network to all other local network segments
2. Ensure the user subnet cannot use the most commonly used remote access technologies in the Linux and Windows Server segments.
3. Prohibit any traffic that has not been specifically allowed.
INSTRUCTIONS
Use the drop-downs to complete the ACL
If at any time you would like to bring back the initial state of the simulation, please click the Reset All button.
A screenshot of a computer screen AI-generated content may be incorrect.