Pass the CompTIA Network+ N10-009 Questions and answers with Dumpstech

Understanding End-of-Support:

End-of-Support Status: When a vendor declares a device as end-of-support, it means the device will no longer receive updates, patches, or technical support. This poses a security risk as new vulnerabilities will not be addressed.

Risks of Keeping an End-of-Support Device:

Security Vulnerabilities: Without updates, the switch becomes susceptible to new security threats.

Compliance Issues: Many regulatory frameworks require that critical infrastructure be maintained with supported and secure hardware.

Best Next Step - Replacement:

Decommission and Replace: The most secure approach is to replace the end-of-support switch with a new, supported model. This ensures the infrastructure remains secure and compliant with current standards.

Planning and Execution: Plan for the replacement by evaluating the network's needs, selecting a suitable replacement switch, and scheduling downtime for the hardware swap.

Comparison with Other Options:

Apply the Latest Patches: While helpful, this does not address future vulnerabilities since no further patches will be provided.

Ensure the Current Firmware Has No Issues: This is only a temporary measure and does not mitigate future risks.

Isolate the Switch from the Network: Isolating the switch may disrupt network operations and is not a viable long-term solution.

Direct Connect refers to a dedicated network connection between an on-premises network and a cloud service provider (such as AWS Direct Connect). This link bypasses the public internet, providing a more reliable and higher-bandwidth connection. It may not inherently include encryption because it relies on the security measures of the dedicated physical connection itself. In contrast, other options like VPN typically involve encryption as they traverse the public internet.

The correct answer is Active-active because a stock exchange broker requires extremely high availability, minimal downtime, and near-zero data loss. According to CompTIA Network+ (N10-009) objectives under high availability and disaster recovery concepts, an active-active configuration involves multiple systems or sites operating simultaneously and sharing the workload. If one system fails, the other continues processing traffic without service interruption.

This model provides the lowest Recovery Time Objective (RTO) and Recovery Point Objective (RPO), which is critical in financial trading environments where even seconds of downtime can result in major financial loss. Active-active architectures also support load balancing, redundancy, and continuous synchronization between systems.

A warm site (Option A) contains preconfigured hardware but may require data restoration and configuration before becoming fully operational, resulting in some downtime. A full mesh (Option C) is a network topology design and does not specifically address disaster recovery at the service level. In-band (Option D) refers to management traffic sharing the production network and is unrelated to DR strategy.

Therefore, an active-active approach is the most suitable solution for mission-critical financial operations.

Border Gateway Protocol (BGP) is the primary protocol used to route traffic on the public internet. It allows ISPs and large networks to exchange routing information, making it an Exterior Gateway Protocol (EGP).

Breakdown of Options:

A. BGP – Correct answer. Used for internet routing and exchanges routing information between ISPs.

B. OSPF – An Interior Gateway Protocol (IGP) used for routing within an autonomous system (not the public internet).

C. EIGRP – Cisco’s proprietary IGP, used within private networks, not the public internet.

D. RIP – An older distance-vector protocol, not scalable for the internet.

Comprehensive and Detailed Explanation (aligned to N10-009):

802.1X provides port-based Network Access Control (NAC), requiring authentication (often through RADIUS) before granting access. This is the standard for enterprise authentication on both wired and wireless networks.

A. 802.1Q defines VLAN trunking.

C. 802.3bt defines higher-power PoE.

D. 802.11h deals with spectrum management in wireless.

References (CompTIA Network+ N10-009):

Domain: Network Security — NAC, 802.1X authentication.

The correct answer is EOL discontinues the product but may offer support. According to CompTIA Network+ (N10-009) objectives related to lifecycle management and vendor support policies, End of Life (EOL) indicates that a product is no longer being manufactured or sold by the vendor. However, after EOL is declared, the vendor may continue to provide limited support, updates, or warranty services for a defined period.

In contrast, End of Support (EOS) means the vendor has stopped providing technical assistance, patches, firmware updates, and security fixes for the product. Once a product reaches EOS, organizations are responsible for maintaining it without vendor assistance, which can introduce operational and security risks.

Option B is incorrect because EOS does not typically convert support into a subscription model—it signifies the termination of support. Option C is incorrect because EOS applies to both hardware and software products. Option D is incorrect because warranty terms depend on vendor policy and are not guaranteed after EOL status.

Therefore, the key distinction is that EOL ends product sales, while EOS ends vendor support.

Out-of-band (OOB) management refers to using a dedicated management network that is physically separate from the regular data network. This management network uses a different set of IP addresses to ensure that management traffic is isolated from user data traffic, providing a secure way to manage network devices even if the main network is down or compromised.References: CompTIA Network+ study materials. ​

A mesh network is the best solution for providing reliable wireless service to public safety vehicles. In a mesh network, each node (vehicle) can connect to multiple other nodes, providing multiple paths for data to travel. This enhances reliability and redundancy, ensuring continuous connectivity even if one or more nodes fail. Mesh networks are highly resilient and are well-suited for dynamic and mobile environments such as public safety operations.References: CompTIA Network+ study materials.

Content filtering can be used to block or restrict access to websites and services that facilitate torrenting and other prohibited activities. By implementing content filtering, the company can comply with the ISP's cease-and-desist order and prevent users from accessing torrent sites and engaging in prohibited activities.References: CompTIA Network+ study materials.

Microwaves are known to interfere with the 2.4GHz frequency, which is the same frequency used by many wireless networks. This can cause signal degradation and intermittent connectivity issues, especially if the WAP is placed near such devices.

=================

The correct solution is to configure the connecting ports as trunk ports. When connecting switches, the uplink ports must be configured to carry traffic for multiple VLANs (trunking), not just a single access VLAN. Without trunking, VLAN tags may be dropped, and traffic from hosts will not reach the rest of the network or internet.

B. STP cables is a misnomer — STP refers to Spanning Tree Protocol or Shielded Twisted Pair cables, neither of which solves this logical configuration issue.

C. PoE budget is irrelevant because switches and hosts in this context don’t require PoE.

D. Link aggregation (LACP, EtherChannel) is for increasing bandwidth/redundancy across multiple links, not required with a single cable.

By enabling trunking on the uplink ports, the switches can pass VLAN-tagged traffic, ensuring hosts connected to the new switch have access to the same resources as those on the existing switch.

References (CompTIA Network+ N10-009):

Domain: Network Troubleshooting — VLAN trunking, inter-switch connectivity.

The customer can access local resources (a database server), which means local networking is working. However, the inability to reach the internet suggests an issue with the default gateway. If the default gateway is unreachable, packets will not be routed outside the local network.

Breakdown of Options:

A. Incorrect DNS – DNS issues would cause problems resolving domain names, but the user should still be able to access external resources via IP addresses.

B. Unreachable gateway – ✅ Correct answer. If the default gateway is incorrect or unreachable, the device cannot route traffic to the internet.

C. Failed root bridge – STP (Spanning Tree Protocol) failures cause switching issues, but the user can still access local devices, meaning STP is not the problem.

D. Poor upstream routing – Would affect the entire network, not just one user.

Cross talk can often be caused by improper termination of cables. The first step in troubleshooting should be to inspect the connectors for any wires that might be touching or exposed. Ensuring that all wires are correctly seated and that no conductors are exposed can help reduce or eliminate cross talk. This step should be taken before attempting to re-terminate the connections or check for other sources of interference.References: CompTIA Network+ study materials.

In data centers, hot aisle/cold aisle configurations are used to manage airflow and cooling efficiency. Port-side exhausts should be oriented towards the warm aisle to expel hot air and maintain optimal cooling. The document clarifies:

“Equipment with port-side exhausts should be oriented towards the warm aisle to ensure that hot air is properly directed away from the cold air intake areas. This alignment supports effective cooling in data center environments.”