Pass the Huawei HCIP-Storage H13-624_V5.5 Questions and answers with Dumpstech

Huawei states that SmartCompression is suitable for data that is stored in the same format but contains little duplicate data , because it can save storage space and reduce costs.

Configuring iSCSI block services on Huawei scale-out storage, like OceanStor Pacific, involves specific steps. The *HCIP-Storage V5.5 Training Material (Module 4: Storage Design and Implementation)* states: “To enable iSCSI block services, the engineer must create a block storage pool to allocate storage resources and configure the iSCSI service to set up initiator-target relationships and network parameters.” Let’s evaluate:

- Option A: Required. A block storage pool is necessary to provide the capacity for iSCSI LUNs.

- Option B: Required. Configuring the iSCSI service is essential to enable the protocol and connectivity.

- Option C: Not required. DPC is used for file services, not iSCSI block services.

- Option D: Not required. DPC installation is unrelated to iSCSI configuration.

Thus, options A and B are mandatory.

The *HCIP-Storage V5.5 Training Material (Module 5: Storage System Maintenance and Troubleshooting)* covers power management:

- Option A: True. “Correct expansion cable connections are required before power-on to ensure proper operation.”

- Option B: True. “The BMC system allows powering on controller enclosures via the external management IP when none are powered on.”

- Option C: False. “After an emergency power-off, the storage system is powered on via DeviceManager, CLI, or BMC, not by pressing the controller enclosure’s power button, which is used for normal power-on.”

- Option D: True. “In OceanStor Dorado 8000, powering on a controller enclosure automatically powers on cascaded disk enclosures.”

Thus, option C is false.

This question pertains to the configuration of basic storage services in Huawei OceanStor Dorado series storage systems. According to the *HCIP-Storage V5.5 Training Material (Module 4: Storage Design and Implementation)*, basic service configuration involves essential steps to enable storage access for hosts. The material outlines the following:

- Configuring connectivity between a host and the storage system (Option A) is mandatory, as it involves setting up physical or logical connections (e.g., Fibre Channel or iSCSI) to allow the host to communicate with the storage system. Without this, no storage services can be accessed.

- Creating a mapping (Option C) is also mandatory, as it maps LUNs to hosts or host groups, enabling the host to access specific storage resources. The material states: “Mapping is a critical step to associate LUNs with hosts for service access.”

- Creating a port group (Option B) is optional. Port groups are used to organize front-end ports for specific purposes (e.g., load balancing or zoning), but they are not always required, especially in simpler configurations where default port settings suffice.

- Creating a LUN group (Option D) is optional. LUN groups simplify management by grouping multiple LUNs for mapping, but they are not mandatory if LUNs are mapped individually.

Thus, options B and D are optional operations, as they are not always required for basic service configuration.

The correct answer is SmartQoS . Huawei’s OceanStor Pacific documentation states that SmartQoS supports OPS and bandwidth upper limit control by namespace, account, and client IP address . This matches the question exactly.

The HyperSnap feature in Huawei flash storage systems, such as OceanStor Dorado, enables point-in-time snapshots for data protection. The *HCIP-Storage V5.5 Training Material (Module 2: Flash Storage Technologies)* states: “To create snapshots using HyperSnap, the storage pool containing the source LUNs must have sufficient available capacity to store snapshot metadata and copy-on-write (COW) data. If the storage pool lacks free space, snapshot creation for a protection group will fail.” This aligns with the question’s statement that a lack of available capacity in the storage pool prevents snapshot creation for a protection group, making the statement true. The material emphasizes that capacity issues are a common cause of snapshot failures, as snapshots require additional space for incremental changes.

This statement is false . Huawei’s official OceanStor Dorado networking documentation states that quorum links must be established on GE, 10GE, or 25GE networks, but not on a Fibre Channel network . Therefore, it is incorrect to say that only 10GE can be used and that 25GE cannot be used .

Huawei’s SmartIO interface module documentation also explicitly states that 10 Gbit/s and 25 Gbit/s SmartIO interface modules can be used for HyperMetro quorum links . This directly confirms that 25GE is supported for quorum networking. Fibre Channel, however, is not supported for quorum links.

So the correct judgment is:

10GE → supported

25GE → supported

Fibre Channel → not supported

Hence, the overall statement is FALSE .

The SmartEncryption feature in Huawei OceanStor Pacific ensures data security. The *HCIP-Storage V5.5 Training Material (Module 3: Scale-Out Storage Technologies)* explains:

- Option A: True. “For DPC or NFS reads, self-encrypting disks (SEDs) retrieve authentication keys from the key management server, decrypt ciphertext, and return plaintext to the protocol layer.”

- Option B: True. “SmartEncryption supports encrypted writes and decrypted reads via NFS, CIFS, HDFS, and S3 protocols.”

- Option C: False. “SmartEncryption encrypts data at the storage layer. Clients using NFS, CIFS, or DPC write data that is automatically encrypted by the system before storage, not written as plaintext.”

- Option D: True. “OceanStor Pacific uses SEDs for disk-level encryption, ensuring all service data is encrypted.”

Thus, option C is false.

A is false. Huawei defines secondary resource protection as controlling the access status of the secondary resource . For example, the secondary volume/file system can be set to read-only or read/write , or in Pacific documentation, the secondary namespace does not receive host read/write services and only receives replication data. It does not mean suspending the replication relationship.

B is true. Huawei defines a pair as the data replication relationship between the primary and secondary LUNs/volumes . Huawei documentation also states that when the running status is Normal , data at the two sites has been synchronized successfully.

C is true. Huawei explicitly states that a consistency group is a collection of pairs that have a service relationship with each other .

D is true. Huawei describes synchronization as the process of synchronizing or copying data from the primary resource/volume to the secondary resource/volume