Pass the Juniper JNCIS-MistAI JN0-460 Questions and answers with Dumpstech

In theCampus Fabric Deployment Wizard, the first step is defining thetopology type(3-stage or 5-stage IP Clos) and mapping thephysical connectionsbetween devices (core, distribution, and access).

“The first step in the campus fabric deployment process is to define the topology and identify physical connections between devices. This ensures correct port mapping between core, distribution, and access tiers.”

Option A:Correct— topology definition and physical connectivity mapping occur in the initial step.

Option B:Incorrect — the underlay network configuration happens after topology definition.

Option C:Incorrect — overlay configuration handles EVPN/VXLAN and routing setup, not physical cabling.

Option D:Incorrect — applying intent finalizes the deployment but does not define connectivity.

TheMist UI(User Interface) is Juniper’s cloud-based management platform used tomanage both wired and wireless devices, including EX, QFX, and SRX platforms.

It provides centralized visibility, configuration, analytics, and AI-driven insights for the entire enterprise network infrastructure.

WithinWired Assurance, the Mist UI enables device claiming, switch templates, configuration management, and SLE monitoring.

Juniper Mist supports ahierarchical configuration model:

Organization level:global configuration templates applied across sites.

Site level:shared configuration for all devices in a site.

Individual device level:unique overrides.

To applycommon system-level settings(e.g., NTP, SNMP, DNS, syslog) across multiple sites, the correct method is to use anorganization-level template.

“Organization-level templates provide a consistent configuration framework that can be applied across multiple sites, ensuring uniform system settings for all switches.”

Option A:Incorrect — manual CLI configuration defeats automation.

Option B:Incorrect — applies only to one site, not multiple.

Option C:Correct— organization-level templates provide centralized configuration for all sites.

Option D:Incorrect — individual configuration is for unique settings only.

InJuniper Mist Wired Assurance, SLEs (Service Level Expectations) measure key performance indicators for wired network quality.Throughput SLEmonitorsdata transfer quality, includinglatency, jitter, and packet loss, which directly impact real-time applications such as voice or video.

“The Throughput SLE provides visibility into end-to-end network performance by tracking latency, jitter, and packet loss, helping identify congestion or quality issues across wired connections.”

Option A (Throughput):Correct— this SLE includes jitter measurement.

Option B (Successful Connect):Tracks client connection success rate, not jitter.

Option C (Capacity):Monitors link utilization and load, not jitter.

Option D (Switch Health):Monitors device hardware and software health, not traffic performance.

In Mist,sitesrepresent the physical or logical grouping of devices within an organization.

You create and manage a site configuration under theLocationhierarchy in the Mist UI.

Each site inherits organization-level settings but can override or customize specific configurations such as VLANs, templates, or switch settings.

In Juniper Mist, thesyslogfeature allows administrators to forward event messages and alerts from the Mist cloud to an external syslog server.

This is often used for centralized event monitoring, compliance, and correlation with tools like Splunk or SIEM systems.

Syslog operates over UDP or TCP and can capture switch events, system logs, and Marvis actions for both Wired and Wireless networks.

Creating a new site requires asite nameandtime zone.

Other parameters (like templates or location data) are optional but recommended for proper reporting.

In Juniper Mist Cloud, administrative roles define what actions a user can perform within an organization. The ability to claim and onboard switches is granted to roles that have configuration or deployment privileges.

“Only users with Super User, Network Admin, or Installer roles can claim, onboard, or delete devices such as access points, switches, or gateways within a Mist organization.”

Option A (Network Admin):Correct— can claim and manage network devices.

Option B (Installer):Correct— role specifically intended for device onboarding and site setup.

Option C (Super User):Correct— full administrative privileges including device claiming.

Option D (Observer):Incorrect — view-only access.

Option E (Helpdesk):Incorrect — limited to troubleshooting functions, not device management.

In Juniper’scampus fabric architectures, the location of theLayer 3 gateway(IRB) differentiates between CRB and ERB models:

Centrally-Routed Bridging (CRB):L3 gateways are placed at thecore layer.

Edge-Routed Bridging (ERB):L3 gateways are placed at thedistribution layer, closer to the edge.

“In the ERB model, Layer 2 gateways are deployed at the access layer, andLayer 3 gateways are deployed at the distribution layer.”

Option A (CRB):Incorrect — L3 is at the core, not distribution.

Option B (IP Clos):Incorrect — in 3-stage Clos, L3 is pushed to the access layer.

Option D (EVPN multihoming):Incorrect — this is about redundancy, not gateway placement.

Option C (ERB):Correct — L3 gateways sit at thedistribution layerin the ERB architecture.

Juniper Mist Cloud uses anopen RESTful API frameworkfor integration, automation, and programmability across all Mist services, includingWired Assurance,Marvis, andAI-driven automation.

“All Mist Cloud services are built on a 100% open REST API framework, allowing customers to automate configuration, monitoring, and troubleshooting through standard REST calls.”

The REST API exchanges data inJSONformat, but the API type itself isREST, not JSON.

Option A (REST):Correct— Mist services expose 100% REST-based APIs.

Option B (SOAP):Incorrect — SOAP is an older XML-based protocol not used in Mist.

Option C (JSON):Incorrect — JSON is thedata format, not the API type.

Option D (RPC):Incorrect — not used in the Mist Cloud architecture.