Black Friday VIP Hour Limited Time 75% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code = simple75

Pass the Netapp NAHSE NS0-094 Questions and answers with Dumpstech

Exam NS0-094 Premium Access

View all detail and faqs for the NS0-094 exam

Practice at least 50% of the questions to maximize your chances of passing.
Viewing page 1 out of 3 pages
Viewing questions 1-10 out of questions
Questions # 1:

A node has unexpectedly failed and is unresponsive through its node management interface.

Which two commands from the Service Processor are helpful to determine the root cause? (Choose two.)

Options:

A.

sp status –d

B.

event log show

C.

system log

D.

system core

Questions # 2:

You receive the following AutoSupport message:

[Node-01: cshmd: hm.alert.raised:alert]:

Alert Id = ClusterSwitchConnectivity_Alert

Alerting Resource = Node-02

raised by monitor ethernet-switch

[Node-01: mgwd: callhome.hm.alert.major:alert]:

Call home for Health Monitor process cshm:

ClusterSwitchConnectivity_Alert[Node-02].

[Node-01: mgwd: callhome.hm.alert.major:alert]:

Call home for Health Monitor process cshm:

ClusterSwitchConnectivity_Alert[Node-02].

When researching, you discover the following output:

Exhibit 2 — Network Port Health

Cluster::* > network port show

-health-status degraded

-fields health-degraded-reasons

node port health-degraded-reasons

-------- ---- -----------------------

Node-02 e0a link_flapping

What action do you take to resolve this issue?

Options:

A.

Replace the SFP on port e0a on node-02.

B.

Update the RCF file on the cluster switches.

C.

Update the firmware on the cluster switches.

D.

Replace the SFP on port e0a on node-01.

Questions # 3:

What happens when the command diskcopy is run from nodeshell?

Options:

A.

It pre-fails a drive in an aggregate and copies it to a spare.

B.

It performs a low-level copy of the disk to another disk.

C.

It copies the disk content to a specified volume.

D.

It triggers a RAID reconstruction of that disk.

Questions # 4:

You are troubleshooting an L2 connectivity problem, and you want to analyze network traffic.

Which command do you use to capture network packets?

Options:

A.

traceroute

B.

netstat

C.

ping

D.

tcpdump

Questions # 5:

Which two ONTAP systems support both SSD and SAS disks? (Choose two.)

Options:

A.

AFF C190

B.

FAS2750

C.

AFF A220

D.

FAS8200

Questions # 6:

On a NetApp FAS9000 system, which two field replaceable units (FRUs) are supported for replacement without takeover? (Choose two.)

Options:

A.

I/O module

B.

DCPM module

C.

caching module

D.

NVRAM module

Questions # 7:

Which two of the following methods are valid ways to access a node which is not booting? (Choose two.)

Options:

A.

node management port

B.

cluster management port

C.

Service Processor

D.

serial console

Questions # 8:

A node has failed.

Which two conditions must be met for an automatic takeover to be triggered? (Choose two.)

Options:

A.

The combined utilization of both nodes must be less than 100%.

B.

The cluster network must be available.

C.

Mailbox disks must be reachable.

D.

NVRAM must be synchronized.

Questions # 9:

You are using wafliron on an aggregate named homedir on a production system.

When is the data on homedir available?

Options:

A.

when the administrator manually onlines the aggregate

B.

when wafliron is started

C.

after Phase 4 of wafliron is complete

D.

after the mounting phase of wafliron is complete

Questions # 10:

On an AFF A700 system, a SAS stack is connected to SAS ports 2a and 2b. The system has an additional 4-port SAS card in slot 9.

How should the cabling the corrected for best practices?

Options:

A.

Use port 2a and 9a.

B.

Use port 2a and 9b.

C.

Use port 2a and 2c.

D.

Use port 2b and 9d.

Viewing page 1 out of 3 pages
Viewing questions 1-10 out of questions