Pass the Netskope NCCSI NSK200 Questions and answers with Dumpstech

DTLS (Datagram Transport Layer Security) is a protocol that provides secure communication over UDP. It is an option that can be enabled in the client configuration settings in the Netskope tenant. Enabling DTLS can improve the performance of the Netskope client, especially in high latency or packet loss scenarios. DTLS is not related to Real-time Protection policies, SSL decryption policies, or steering configuration, which are different configuration elements in the Netskope tenant. References: Client Configuration Settings 3, Netskope Client Performance 4

The corporate firewall blocking UDP port 443 to Netskope could cause tunnel establishment failures. Netskope clients rely on this port for secure tunneling (via DTLS), so ensuring UDP port 443 is open is essential for connectivity. Additionally, legacy proxies intercepting traffic could also disrupt the SSL/TLS traffic necessary for the Netskope tunnel​​.

To ensure that the traffic from the Zoom client is visible to Netskope, you need to remove the Zoom certificate-pinned application from the default steering configuration and remove the default steering exception for the Web Conferencing Category. A certificate-pinned application is an application that validates the server certificates against the hardcoded ones in the application. This is a security technique used to prevent man-in-the-middle attacks and secure access to the application. By default, Netskope bypasses the traffic from certificate-pinned applications and does not decrypt or inspect it3. Zoom is one of the predefined certificate-pinned applications that Netskope supports4. To enable Netskope to inspect the traffic from Zoom, you need to remove it from the steering configuration that applies to your users5. Additionally, you need to remove the default steering exception for the Web Conferencing Category, which includes Zoom and other similar applications. A steering exception is a rule that specifies the traffic that you want to bypass Netskope and go directly to the destination6. By removing this exception, you allow Netskope to steer and analyze the traffic from web conferencing applications. Therefore, options C and D are correct and the other options are incorrect. References: Certificate Pinned Applications - Netskope Knowledge Portal, Certificate Pinned App (CPA) - The Netskope Community, Steering Configuration - Netskope Knowledge Portal, Steering Exceptions - Netskope Knowledge Portal

To deploy Netskope using proxy chaining with Symantec BlueCoat proxy on-premises, you need to enable two prerequisites first: Enable SSL decryption on your Symantec BlueCoat proxy. This is required for proxy chaining because Netskope needs to inspect the SSL traffic that is sent from your proxy to the Netskope cloud. To enable SSL decryption, you need to configure your Symantec BlueCoat proxy to trust the Netskope certificate for SSL interception. You can download the certificate from Settings > Manage > Certificates > Signing CA in the Netskope UI. Enable the X-Forwarded-For HTTP header on your Symantec BlueCoat proxy. This is required for proxy chaining because Netskope needs to identify the original source IP address of the user behind your proxy. The X-Forwarded-For header is used to pass this information from your proxy to Netskope. To enable this header, you need to configure your Symantec BlueCoat proxy to send X-Forwarded-For HTTP header for all HTTP requests. The other options are not valid prerequisites for this scenario. You do not need to disable SSL decryption on your Symantec BlueCoat proxy, as this would prevent Netskope from inspecting the SSL traffic. You do not need to disable the X-Authenticated-User header on your Symantec BlueCoat proxy, as this is an optional header that can be used to pass additional user information from your proxy to Netskope. References: Proxy Chaining3, Configure Forcepoint for Proxy Chaining

The method that makes it possible for a mass update of the URL list in the Netskope platform is A. REST API v2. REST API v2 is a feature that allows you to use an auth token to make authorized calls to the Netskope API and access resources via URI paths5. You can use REST API v2 to update a URL list with new values by providing the name of an existing URL list and a comma-separated list of URLs or IP addresses6. This can help you automate or script the management of your URL lists and keep them up-to-date. Therefore, option A is correct and the other options are incorrect. References: REST API v2 Overview - Netskope Knowledge Portal, Update a URL List - Netskope Knowledge Portal

To allow the usage of Dropbox while maintaining visibility, create a new tenant steering exception of type " Destination Locations " for Dropbox. This will enable traffic visibility for Dropbox while avoiding a block, as requested​.

The Netskope client can be disabled by the administrator from the Netskope console. This is useful for troubleshooting or maintenance purposes. When the client is disabled by the administrator, it shows the status as “Admin Disabled” and does not apply any policies or steer any traffic. The user cannot enable the client unless the administrator enables it from the console. The other options are not valid reasons for the client to be in an “Admin Disabled” state. References: Netskope Client Status 1, Enable or Disable Netskope Client 2

A reverse proxy integrated with their SSO would satisfy the requirements for this scenario. A reverse proxy intercepts requests from users to cloud apps and applies policies based on user identity, device posture, app, and data context. It can enforce DLP controls to prohibit downloading sensitive files to unmanaged devices. It can also integrate with the customer’s SSO provider to authenticate users and allow access only to the corporate instance of OneDrive. The other steering methods are not suitable for this scenario because they either require the Netskope client or do not provide granular control over cloud app activities.

Netskope can inspect outbound SMTP traffic for Microsoft Exchange and Gmail using the Netskope client. The Netskope client intercepts the SMTP traffic from the user’s device and forwards it to the Netskope cloud for DLP scanning. The Netskope client does not inspect inbound SMTP traffic, as this is handled by the cloud email service or the MTA. Therefore, option A is correct and the other options are incorrect. References: Configure Netskope SMTP Proxy with Microsoft O365 Exchange, Configure Netskope SMTP Proxy with Gmail, SMTP DLP, Best Practices for Email Security with SMTP proxy

To continuously detect and enforce compliance standards for their Microsoft 365 and Azure applications, the customer needs to use Netskope SaaS Security Posture Management (SSPM) and Netskope Continuous Security Assessment (CSA). Netskope SSPM allows the customer to monitor, assess, and act on security, permission, and access related issues in their SaaS environment, such as Microsoft 365. Netskope SSPM continuously checks security posture by comparing SaaS app settings with security policies and industry benchmarks (CIS, PCI-DSS, NIST, HIPAA, CSA, GDPR, AIPCA, ISO, and more). It also provides visibility and control over third-party apps that are connected to the managed apps1. Netskope CSA allows the customer to discover, audit, and remediate misconfigurations in their IaaS environment, such as Azure. Netskope CSA continuously monitors and audits cloud configurations against industry standards, CIS benchmarks, and regulatory frameworks. It also provides real-time inline protection to secure public clouds from threats and data loss2. Therefore, options A and D are correct and the other options are incorrect. References: SaaS Security Posture Management - Netskope, Public Cloud Security Solutions - Netskope