Pass the Checkpoint CCSE 156-315.82 Questions and answers with Dumpstech

The correct answer isD. In the Advanced Upgrade method, the Management Database is exported using the R82migrate_serverutility fromExpert mode, specifically from the $FWDIR/scripts/ directory. The R82 CLI Reference Guide explicitly states that the command must be run from Expert mode, and the syntax shows cd $FWDIR/scripts/ followed by ./migrate_server export -v R82 ... / < Full Path > / < Name of Exported File > . Option A is wrong because Clish is not the correct shell for this operation. Option B is wrong because the command is not located under $CPDIR/bin/ for the documented R82 procedure. Option C is wrong because migrate is the older tool and Clish is still the wrong shell. In CCSE terms, Advanced Upgrade means database export/import using migrate_server, not a Gaia Portal or SmartConsole operation. The correct operational form is:Expert mode → $FWDIR/scripts/ → ./migrate_server export -v R82 ....

========

The correct answer isA. IKEv1 Phase 1 Main Mode usessix packets. Check Point’s R82 Site-to-Site VPN guide states that Main Mode is the default IKEv1 Phase 1 mode and that the Security Gateway performs the IKE negotiation with six packets. Main Mode is preferred over Aggressive Mode because part of the exchange becomes encrypted once both peers know the shared Diffie-Hellman key, and it is less susceptible to denial-of-service conditions than Aggressive Mode. Option D is wrong because three packets correspond to IKEv1 Aggressive Mode, not Main Mode. Option B and Option C are not valid packet counts for the standard IKEv1 Main Mode exchange. For CCSE exam precision, memorize the simple mapping:IKEv1 Main Mode = 6 packets; IKEv1 Aggressive Mode = 3 packets. This is one of the standard Check Point VPN mechanics questions and appears frequently because it tests whether the candidate can distinguish Main Mode from Aggressive Mode without confusing them with IKEv2 exchanges. Reference topic:IKE Phase I Modes.

========

The correct answer isC. Continuous Compliance Monitoring is designed to continuously evaluate the managed Check Point environment, and automatic scans are triggered both on a regular schedule and after relevant management changes are published from SmartConsole. The Compliance Blade examines Security Gateways, Software Blades, policies, and configuration settings against best practices and standards, so it must respond when the management database changes. Option A is wrong because restarting CPM and CPD is not the normal compliance-scan trigger. Option B is also wrong because gateway daemon restarts are not the stated Compliance Blade trigger model. Option D is incomplete because it mentions periodic scans but omits the important publish-triggered scan behavior after SmartConsole changes. The operational logic is simple: a daily scan catches drift over time, while a publish-triggered scan evaluates newly committed management changes. For CCSE, connect Compliance Blade scanning todaily checks plus SmartConsole Publish actions, not service restarts. Reference topic:Compliance Blade / Continuous Compliance Monitoring and policy/configuration evaluation.

========

The correct answer isA. During the transfer phase of policy installation, CPTA sends the compiled/prepared policy files to the Security Gateway, where they are first staged in a temporary policy directory before being committed. The expected temporary staging directory is $FWDIR/state/_tmp/FW1. This distinction matters because $FWDIR/state/local/FW1 is associated with the committed/local policy state after the gateway completes the local fetch/commit process, not the first temporary transfer location. Option C is wrong because $CPDIR is not the firewall policy state directory used for this stage. Option D is syntactically wrong; it uses state_tmp instead of the correct state/_tmp structure. Check Point troubleshooting material around policy installation also references files being transferred into the temporary $FWDIR/state/__tmp/FW1-style directory before local commit/installation processing. For the CCSE answer set, the intended answer is the temporary transfer directory:$FWDIR/state/_tmp/FW1. Reference topic:Policy Installation Flow / CPTA Transfer Directory.

========

The correct answer isD. In Check Point Identity Awareness and Access Control policy, anAccess Roleobject combines identity and location attributes into one reusable policy object. The R82 Security Management Administration Guide states that Access Role objects let administrators configure network access according toNetworks,Users and user groups,Computers and computer groups, andRemote Access VPN clients. That maps directly to option D: Name, Networks, Users, Machines, and Remote Access Clients. Option A is too narrow and incorrectly reduces the object to subnet and LDAP fields. Option B mixes IP address and LDAP account unit fields but misses the real policy dimensions. Option C also mixes back-end directory and object-type terminology rather than the functional Access Role components. The purpose of an Access Role is not merely to identify a subnet or LDAP unit; it is to define who, from which machines, on which networks, and through which remote-access context can match a rule. Reference topic:Access Roles / Identity Awareness.

========

The correct answer isB. To open the SmartEvent Settings & Policy application, openSmartConsole > Logs & Events, click+to open a new Catalog tab, and then selectSmartEvent Settings & Policyfrom theExternal Appssection. Option A is wrong because Global Properties > Log and Alert is not where SmartEvent event policy is opened. Option C is close but inaccurate; the documented path uses a new Catalog tab, not Logs > External Apps. Option D is wrong because Security Policies > Manage Policies is for policy package handling, not SmartEvent policy configuration. This is a direct navigation question, so the wording matters.

========

The correct answer isD. Collision Mode in Check Point Management High Availability means that more than one Management Server is configured as Active. In a clean HA state, one server is Active and the other server or servers are Standby. The Active server is used for management operations and synchronizes the standby peers. Collision Mode appears when a Standby server is changed to Active without the existing Active server being changed to Standby, typically because the two servers cannot communicate. Option A is wrong because Primary and Secondary are installation roles, not collision states. Option B is not the definition; time synchronization problems may cause operational issues, but Collision Mode is specifically about multiple Active management servers. Option C is normal and supported because Check Point allows one or more Standby Security Management Servers. The operational risk is serious: Active servers in collision do not synchronize, and when one is returned to Standby, its data is overwritten by the remaining Active server. Reference topic:High Availability Troubleshooting / Collision or HA Conflict.

========

The correct answer isC. In SmartConsole, a third-party non-Check Point VPN peer is represented by anInteroperable Deviceobject. This object is used when the remote VPN peer is not a Check Point Security Gateway but still needs to participate in a Site-to-Site IPsec VPN community. The object holds the external peer’s VPN identity, IP address, VPN domain, and encryption/authentication settings. Option A and D are generic descriptions, not the official SmartConsole object name. Option B, “External Gateway,” is not the precise object name used for a third-party non-Check Point IPsec device. Check Point documentation explicitly says to create anInteroperable Deviceobject to represent the External Gateway and gives the SmartConsole path: New > More > Network Object > More > Interoperable Device.

========

The correct answer isD. The command must use the R82 Management Server Migration Tool from the $FWDIR/scripts directory and must specify the target version asR82. The correct syntax is:

$FWDIR/scripts/migrate_server print_installed_tools -v R82

Option A is wrong because print_tools is not the correct operation name and the version is wrong. Option B is wrong because the tool path is $FWDIR/scripts, not $CPDIR/scripts, and it specifies R81.20 instead of R82. Option C uses the right operation name but the wrong version; R77.30 is not the target release in this scenario. Since Alice is importing an exportedR82Management Database, the installed migration tools must be verified forR82. Check Point’s R82 Installation and CLI guidance uses the migrate_server tool for R80.20-and-higher management migration workflows.

The correct answer isA. TheCentral Deployment Tool, CDT, is a Management Server-side automation tool used to manage package installation on multipleSecurity Gateways and Cluster Members. The CDT Administration Guide states that CDT runs on Gaia Security Management Servers and Gaia Multi-Domain Security Management Servers, and that it manages installation of software packages from the Management Server to multiple Security Gateways and Cluster Members at the same time. The documented workflows include upgrading a single Security Gateway, upgrading Cluster Members in High Availability mode, and installing Hotfixes on Security Gateways or Clusters. Option B is wrong because CDT does not upgrade Management Servers or Multi-Domain Servers as targets. Option C is wrong for the same reason: Management Servers are not CDT target components. Option D is misleading because “Standalone Deployment” is not the normal CDT target category in the official workflow. CDT may run from the Management Server, but its installation candidates are gateway and cluster-member objects. Reference topic:Central Deployment Tool / Introduction and Workflows.

========