Black Friday VIP Hour Limited Time 75% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code = simple75

Pass the Cisco CCNP Wireless 300-120 Questions and answers with Dumpstech

Exam 300-120 Premium Access

View all detail and faqs for the 300-120 exam

Practice at least 50% of the questions to maximize your chances of passing.
Viewing page 3 out of 4 pages
Viewing questions 21-30 out of questions
Questions # 21:

An engineer is configuring multicast for two WLCs. The controllers are in different physical locations and each handles around 500 wireless clients. How should the CAPWAP multicast group address be assigned during configuration?

Options:

A.

Each WLC must be assigned a unique multicast group address.

B.

Each WLC management address must be in the same multicast group.

C.

Both WLCs must be assigned the same multicast group address.

D.

Each WLC management address must be in a different multicast group.

Questions # 22:

Refer to the exhibit. An event company must gather location-tracking details of wireless clients at an event where clients will be given free guest access to the Wi-Fi. A network engineer must integrate a Cisco WLC with a Cisco CMX server. Which command must be run?

Question # 22

Options:

A.

B.

C.

D.

Questions # 23:

A wireless engineer must implement a corporate wireless network for a large company in the most efficient way possible. The wireless network must support 32 VLANs for 300 employees in different departments. Which solution must the engineer choose?

Options:

A.

Configure a second WLC to support half of the APs in the deployment.

B.

Configure one single SSID and implement Cisco ISE for VLAN assignment according to different user roles.

C.

Configure different AP groups to support different VLANs, so that all of the WLANs can be broadcast on both radios.

D.

Configure 16 WLANs to be broadcast on the 2.4-GHz band and 16 WLANs to be broadcast on the 5.0-GHz band.

Questions # 24:

An engineer needs to provision certificates on a Cisco Catalyst 9800 Series Wireless Controller. The customer uses a third-party CA server. Which protocol must be used between the controller and CA server to request and install certificates?

Options:

A.

SCEP

B.

TLS

C.

LDAP

D.

SSL

Questions # 25:

An engineer has been hired to implement a way for users to stream video content without having issues on the wireless network. To accomplish this goal, the engineer must set up a reliable way for a Media Stream to work between Cisco FlexConnect APs. Which feature must be enabled to guarantee delivery?

Options:

A.

Unicast Direct

B.

IGMP Direct

C.

Multicast Direct

D.

Multicast-to-Unicast Direct

Questions # 26:

An engineer is deploying a Cisco wireless network to support branch offices. All APs are in FlexConnect mode, and the SSIDs switch traffic locally. The customer requires that all QoS for the VoWLAN service be based on Layer 2 markings. Which configuration is required on the switch ports that connect to the APs?

Options:

A.

MLSAWID1P

B.

MLSAWID UP

C.

MLS Trust DSCP

D.

MLS Trust COS

Questions # 27:

The security policy mandates that only controller web management traffic is allowed from the IT subnet. In testing, an engineer is trying to connect to a WLAN with Web Authentication for guest users, but the page is timing out on the wireless client browser. What is the cause of the issue?

Options:

A.

The implemented CPU ACL on the controller is blocking HTTP/HTTPS traffic from the guest clients.

B.

Web Authentication Redirect is not supported with CPU ACLs.

C.

The DNS server that is configured on the controller is incorrect.

D.

Web Authentication Redirect is supported only with Internet Explorer, and the client is using Google Chrome.

Questions # 28:

An engineer is planning an image upgrade of the WLC, and hundreds of APs are spread across remote sites with limited WAN bandwidth. The engineer must minimize the WAN utilization for this upgrade. Which approach must be used for the AP image upgrade?

Options:

A.

Predownload the new code to the APs.

B.

Use the Smart AP image upgrade feature.

C.

Allow the APs to download their code after WLC reboot.

D.

Execute parallel TFTP code upgrade on the APs via SSH.

Questions # 29:

The CTO of an organization wants to ensure that all Android devices are placed into a separate VLAN on their wireless network. However, the CTO does not want to deploy ISE. Which feature must be implemented on the Cisco WLC?

Options:

A.

WLAN local policy

B.

RADIUS server overwrite interface

C.

AAA override

D.

custom AVC profile

Questions # 30:

A customer uses a Cisco Catalyst 9800 Series Wireless Controller and Cisco 802.11axAPs. The management has requested the ability to see what type of devices are on the wireless network. Which two types of local device profiling must be used? (Choose two)

Options:

A.

Ip address

B.

wireless supplicant

C.

RADIOUS

D.

DHCP

E.

MAC Address OUI

Viewing page 3 out of 4 pages
Viewing questions 21-30 out of questions