Spring Sale Limited Time 75% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code = simple75

Pass the Cisco CCNP Data Center 350-601 Questions and answers with Dumpstech

Exam 350-601 Premium Access

View all detail and faqs for the 350-601 exam

Go to Exam
Practice at least 50% of the questions to maximize your chances of passing.
Viewing page 3 out of 11 pages
Viewing questions 21-30 out of questions
Questions # 21:

An engineer must implement a VXLAN-based data center Interconnect. The long-distance transport provided by a service provider is IP-based, supports a maximum MTU of 1554 bytes, and does not support outbound traffic replication. Which action must be taken to build the data center Interconnect?

Options:

A.

Implement BGP EVPN Ingress replication

B.

Create an IP access list and associate It with VNI to replicate traffic to remote VTEPs

C.

Announce host reachability over BGP.

D.

Configure a route map to associate the IPs of the remote VTEPs

Questions # 22:

Which command must be run before downgrading a Cisco Nexus 9300 Series Switch?

Question # 22

Options:

A.

Option A

B.

Option B

C.

Option C

D.

Option D

Questions # 23:

An engineer must assign a device alias of Marketing to a Fibre Channel port that has a world wide name of 21:00:00:00:11:11:22:22 on a Cisco MDS 9000 Series Switch. Which two commands accomplish this goal? (Choose two.)

Question # 23

Options:

A.

Option A

B.

Option B

C.

Option C

D.

Option D

Questions # 24:

Question # 24

Refer to the exhibit. An engineer must create a scheduler task on a Cisco Nexus 9000 Series Switch at 06:00 AM. The task must save the running configuration to a file in the bootflash, then transfer the file from the bootflash to a TFTP server Which command must the scheduler task run after the running configuration is copied to the bootflash?

Options:

A.

scheduler job name backup-cfg

B.

copy bootflash:/$(TIMESTAMP)-cfg.$(SWITCHNAME) tftp://192.168.2.1/

C.

scheduler schedule name daylydbackup

D.

cli var name timestamp $(TIMESTAMP)

Questions # 25:

Which solution provides remote and direct file-level access to users and systems?

Options:

A.

Fibre Channel over Ethernet

B.

network-attached storage

C.

direct-attached storage

D.

storage area network

Questions # 26:

What is the function of network file storage?

Options:

A.

It provides file system access for storage devices

B.

It uses Fibre Channel switches to store data at the block level.

C.

It allows clients to access files stored on a remote server

D.

It supports block-level system protocol used to access storage blocks

Questions # 27:

Which two configuration settings are available in the in the cisco UCS firmware Auto sync server policy?

Options:

A.

User Notification

B.

User Acknowledge

C.

No Action

D.

Delayed Action

E.

Immediate action

Questions # 28:

Question # 28

Refer to the exhibit A VXLAN data center fabric has three hosts mapped to three different VLANs. Ingress and egress VTEPs perform Layer 2 and Layer 3 lookups VLAN 100 is mapped to VNI 1010 on Lead. Which set of actions allow communication between Host-1 and Host-2?

Options:

A.

MAP VLAN 200 to Layer 2 VNI 2020 on Leaf2. Attach Test_Telco_VRF to Layer 2 VNI 1010.

B.

Suppress ARP for Layer 2 VNI under interface NVE. Configure anycast gateway feature on interface vlan of L3 VNI

C.

Enable prefix-based routing under interface vlan of L3 VNI. MAP VLAN 200 to layer 2 VNI 2020 on Leaf2

D.

Attach Test_Telco_VRF to Layer 3 VNI 1010. Suppress ARP for Layer 3 VNI under interface NVE

Questions # 29:

Refer to the exhibit. A source is sending a multicast traffic stream to the receiver. How is the multicast traffic expected to flow through the network when it reaches a vPC peer?

Options:

A.

The multicast traffic is not replicated to the ports that joined a multicast group (224.0.0.13) or the peer link. The multicast traffic stream flows from Agg-1 to Agg-2 over the M1-to-M2 peer link and forwards the traffic over Layer 4 to Access-2.

B.

The multicast traffic is replicated to the ports that joined a given multicast group and the peer link. The multicast traffic stream flows from Agg-1 to Agg-2 over the M1-to-M2 peer link and forwards the traffic over Layer 4 to Access-2.

C.

The multicast traffic is not replicated to the ports that joined a multicast group (224.0.0.13) or the peer link. The multicast traffic stream flows over the vPC link to ensure that orphan ports get the multicast stream in failure scenarios.

D.

The multicast traffic is replicated to the ports that joined a given multicast group and the peer link. The multicast traffic stream flows over the peer link to ensure that orphan ports receive the multicast stream in failure scenarios.

Questions # 30:

The Cisco Nexus 5600 Series Switch experiences occasional packet drops on interface ethernet 1/16. An engineer wants to implement a SPAN session to investigate the issue further. The network analyzer to which the packets must be directed is located on interface 1/3. The analyzer is limited on disk space available for traffic capture, so the Nexus switch should send only the relevant data. Which two command sets configure the SPAN session that meets these requirements? (Choose two.)

Question # 30

Options:

A.

Option A

B.

Option B

C.

Option C

D.

Option D

E.

Option E

Viewing page 3 out of 11 pages
Viewing questions 21-30 out of questions