Spring Sale Limited Time 75% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code = simple75

Pass the Cisco CCNP Data Center 350-601 Questions and answers with Dumpstech

Exam 350-601 Premium Access

View all detail and faqs for the 350-601 exam

Go to Exam
Practice at least 50% of the questions to maximize your chances of passing.
Viewing page 4 out of 11 pages
Viewing questions 31-40 out of questions
Questions # 31:

Question # 31

Refer to the exhibit The communication between the web server and the application server experiences poor performance The network engineer must collect the traffic between the two servers, including the payload for more investigation The collected data must be sent from the remote site to the headquarters. Which action accomplishes this goal?

Options:

A.

Configure an ERSPAN session between N5K-1 and N5K-2.

B.

Configure a SPAN session between N5K-1 and N5K-2.

C.

Configure SNMP on N5K-1 to send the data to the monitor server.

D.

Configure NetFlow on N5K-1 to send the data to the monitor server

Questions # 32:

Drag and drop the telemetry concepts from the left onto their functions on the right.

Question # 32

Options:

Questions # 33:

An engineer builds a new Cisco ACI fabric Which VLAN must be configured as the infrastructure VLAN during the Cisco APIC setup script?

Options:

A.

a unique in-band management VLAN

B.

a unique native VLAN

C.

a unique VLAN within the network

D.

a unique 006 management VLAN

Questions # 34:

Which NFS version uses the TCP protocol and needs only one IP port to run the service?

Options:

A.

NFSv1

B.

NFSv2

C.

NFSv3

D.

NFSv4

Questions # 35:

A network engineer must restore the configuration of a Cisco Nexus 9300 Series Switch The backup file is stored on an external server The current configuration must be replaced without having to reload the switch Which command must be used to accomplish this goal?

Question # 35

Options:

A.

Option A

B.

Option B

C.

Option C

D.

Option D

Questions # 36:

Question # 36

Refer to the exhibit. In a Cisco ACI fabric, the status of interface Eth1/1 changes frequently. Which set of actions configures the fabric to disable Eth1/1 when the port flaps more than 10 times within 1 minute?

Options:

A.

From fabric policies, set the time allowed for max flaps to 60.

B.

From fabric policies set link debounce interval to 60.

C.

From access policies, set the time allowed for max flaps to 60.

D.

From access policies, set link debounce interval to 1.

Questions # 37:

An engineer needs to perform a backup of user roles and locales from Cisco UCS Manager to replicate the setting to a different fabric interconnect. The engineer wants to review the file before importing it to a target fabric intercon- nect. Which backup type must be selected to meet these requirements?

Options:

A.

all configuration

B.

system configuration

C.

logical configuration

D.

fullstate

Questions # 38:

An engineer must configure Cisco MDS 9000 Series Switch to provide role-based authorization on a TACACS+ server. The configuration must meet these requirements:

•All commands under the switch configuration mode must be permitted.

•The group of TACACS+ servers is named lad.

Which command set accomplishes this task?

Options:

A.

"a authorization config-commands

aaa authorization conflg-commands default group tad

B.

aaa authentication conflg-commands

aaa authentication config -commands default group tad

C.

aaa authentication commands

aaa authentication commands default group tad

D.

aaa authorization commands

aaa authorization commands default group tad

Questions # 39:

What is the impact of a nondisruptive update on a Cisco MOS 9000 Series Modular Switch?

Options:

A.

If any CFS commits are pending in the fabric, the upgrade is aborted.

B.

The process continues uninterrupted when a zone server merge is in progress.

C.

After the installation is completed, the system BIOS must be updated.

D.

The system dynamically allocates space to load the new images.

Questions # 40:

Question # 40

Refer to the exhibit. An engineer uses Python in Cisco NX-OS guest shell to retrieve the configuration of the EIGRP ASN on interface eth1/1. The engineer has written this script:

Question # 40

Which command set must be used to retrieve the value of the “asn” key?

Options:

A.

>>> output = json.loads(cli('show ip eigrp neighbors'))

>>> output['TABLE_asn']['ROW_asn']['asn']

B.

>>> output = json.loads(cli('show ip eigrp neighbors'))

>>> output['asn']

C.

>>> output = json.dumps(cli('show ip eigrp neighbors'))

>>> output['asn']

D.

>>> output = json.dumps(cli('show ip eigrp neighbors'))

>>> output['TABLE_asn']['ROW_asn']['asn']

Viewing page 4 out of 11 pages
Viewing questions 31-40 out of questions