Pass the HP ACMX HPE7-V01 Questions and answers with Dumpstech

The correct answer is A because Scality RING is positioned by HPE as a scale-out object and file storage solution built on qualified HPE server platforms, including HPE Alletra Storage Server models. For a customer planning approximately 750 TB of usable software-defined storage, the design focus is the validated HPE server configuration, drive type, usable-capacity target, and Scality license sizing. HPE documentation describes the Scality RING solution as consisting of HPE server systems, Scality license and maintenance, and installation services, with licensing based on unique usable data capacity. The minimum RING configuration is not 1000 TB; HPE references a lower starting usable-capacity threshold, so option B is incorrect. Option D is also incorrect because Scality solutions and licenses are explicitly available through HPE solution packaging. Option C is not the best design statement for this customer use case because the key technical validation is platform support and capacity alignment, not a generic claim about lower-cost licensing. This maps directly to the course topic covering scale-out unstructured data platforms, including Scality, Qumulo, Cohesity, and related HPE storage-server designs.

The correct answer is D because Aruba Fabric Composer is designed for data-center fabric automation, especially ArubaOS-CX based spine-leaf and EVPN-VXLAN environments. It discovers data-center infrastructure and automates the provisioning and ongoing configuration of both spine-and-leaf fabrics and Layer 2 two-tier topologies. That makes it directly relevant to customers with mixed HPE and non-HPE environments where repeatable fabric deployment, validation, and operational consistency are required. Option A is incorrect because HPE Alletra Storage MP B10000 management belongs to HPE storage management tools such as Data Services Cloud Console and array-specific integrations, not Aruba Fabric Composer. Option B is incorrect because HPE Synergy Virtual Connect is managed through HPE OneView / Synergy Composer, not Aruba Fabric Composer. Option C is also not the best answer because SAN zoning is normally performed through Fibre Channel SAN fabric tools or storage-networking workflows, not through Aruba Fabric Composer as a generic function of ArubaOS-CX 8400. The exam logic is clear: Fabric Composer’s value is accelerating, standardizing, and validating data-center network-fabric provisioning. Reference/topics: Aruba Fabric Composer, data-center fabric automation, ArubaOS-CX, spine-leaf provisioning.

The correct answers are B and C. In HPE Alletra 6000 / NimbleOS synchronous replication and Peer Persistence designs, the upstream and downstream volume relationship determines the active and standby host path behavior. HPE documentation states that when synchronous replication is configured, upstream and downstream volumes share the same serial number, and host paths are presented so that active paths are mapped to the upstream volume while standby paths are mapped to the downstream volume. That validates option B. Option C is also correct because in a bidirectional design, each array can host upstream volumes for some protected workloads and downstream volumes for others; the role is per replicated volume collection, not a permanent identity of the entire array. Options A and D are wrong because the witness is a separate arbitration component, not the upstream or downstream array. Option E is wrong because Alletra 6000 synchronous replication uses Ethernet connectivity between arrays, and Peer Persistence is not limited to FC-only host access. Reference/topics: HPE Alletra 6000 Peer Persistence, synchronous replication, upstream/downstream roles, witness design.

The correct answers are C and D. In a three-frame HPE Synergy design using the primary/satellite fabric model, a redundant pair of HPE Virtual Connect SE 100Gb F32 modules can provide the intelligent fabric function while Interconnect Link Modules extend connectivity to satellite frames. Therefore, the proposal can be reduced by removing two unnecessary F32 modules if the remaining pair and link modules still satisfy the required redundant 25/50Gb connectivity. HPE describes the F32 architecture as consolidating data center network connections and scaling bandwidth across multiple Synergy frames using a primary/satellite design. Option D is also correct because Fibre Channel uplink functionality on the HPE Virtual Connect SE 100Gb F32 requires a separate Synergy 32Gb FC upgrade license. HPE OneView documentation states that the Synergy 32Gb FC Upgrade license is required for this interconnect to use Fibre Channel uplinks. Option B is false because the D3940 boot design still needs the SAS/RAID path. Option E is false because Fault Tolerance and advanced availability requirements make Standard an unsafe downgrade. Reference/topics: Synergy fabric validation, F32 FC licensing, D3940 boot architecture, VMware licensing review.

The correct answer is D. HPE Alletra Storage MP B10000 supports mission-critical Peer Persistence designs using synchronous Remote Copy, and FC can be used as an underlying Remote Copy transport. HPE material for Active Peer Persistence states that the solution uses Remote Copy synchronous mode, while HPE B10000 training material describes the requirement for synchronous RC links using RCFC or RCIP and cross-site Fibre Channel or iSCSI host SAN connectivity. Options A and B are wrong because Alletra 6000 is associated with Nimble/Alletra 6000 Peer Persistence, not the same Active Peer Persistence model used with Alletra Storage MP B10000, Primera, and Alletra 9000-class arrays. Option C is not the best answer because Active Peer Persistence is a two-array high-availability model; one-to-many Remote Copy is a replication topology and should not be confused with the active-active peer-persistence protection model. The key validated design differentiator here is that B10000 supports FC-based synchronous replication for high-availability block-storage use cases. Reference/topics: HPE Alletra Storage MP B10000, Active Peer Persistence, Remote Copy, mission-critical storage design.

The correct answer is C. The decisive requirement is RPO 0. A zero recovery point objective means there can be no committed data loss at failover. That requires synchronous replication between sites for the storage volumes that back the VMware datastores. HPE Active Peer Persistence and HPE Remote Copy designs use synchronous replication so that the same data is maintained on both storage systems, and HPE B10000 materials position Active Peer Persistence for high availability across data centers with synchronous Remote Copy and automated failover behavior. Option D is incorrect because asynchronous replication always allows some lag, so it cannot guarantee RPO 0. Option A is incorrect because HPE Synergy logical enclosures should not simply be stretched across sites as the DR mechanism; compute placement and management are separate from storage-level zero-data-loss replication. Option B is useful in VMware policy-driven storage management, but SPBM alone does not create zero-data-loss site protection. The necessary architecture change is synchronous inter-site replication for the datastore volumes, combined with the appropriate failover orchestration. Reference/topics: DR design, RPO/RTO alignment, HPE Alletra Storage MP B10000, synchronous replication, VMware datastore protection.

The correct answers are C and D. In a three-frame HPE Synergy logical enclosure using the primary/satellite fabric model, the HPE Virtual Connect SE 100Gb F32 modules act as the intelligent primary modules and HPE Synergy 50Gb Interconnect Link Modules extend connectivity into satellite frames. A pair of F32 modules with the required satellite link modules can satisfy the fabric requirement; therefore, the extra two F32 modules can be removed if the design still preserves redundancy and required 25/50Gb downlink connectivity. Option D is also correct because Fibre Channel uplink functionality on the HPE Virtual Connect SE 100Gb F32 module requires a Synergy 32Gb FC Upgrade license. This is necessary when using the Synergy fabric to provide FC access to HPE Alletra Storage MP B10000. Option B is false because the D3940 storage module still requires the appropriate SAS/RAID path for boot-device protection. Option E is wrong because the stated FT/vGPU requirement makes Standard licensing an unsafe substitution. Reference/topics: HPE Synergy primary/satellite fabric, VC SE 100Gb F32, FC upgrade licensing, D3940 boot design, VMware subscription validation.

The correct answer is C. The customer requirement is explicit: four SFP28 iSCSI ports per controller node. An HPE Alletra Storage MP B10000 controller pair has two nodes, so the design requires eight usable SFP28 optical connections in total when all four 25GbE ports on each node are to be populated. The BOM already includes the Ethernet host bus adapters required for the iSCSI personality; the gap is the number of optical transceivers. HPE Alletra Storage MP B10000 supports host-port configuration by node, and HPE QuickSpecs list host port limits by controller model. HPE also identifies the 10/25GbE 4-port Host Bus Adapter as the correct Ethernet HBA class for Alletra Storage MP connectivity, while the Q2P64B item is the 25Gb SFP28 short-wave extended-temperature optical transceiver. Option A incorrectly removes the HBAs. Option B adds unnecessary HBAs instead of completing the optics population. Option D replaces adapters unnecessarily when the correct Ethernet HBA capacity is already present. The required correction is to add the missing four SFP28 transceivers so that all eight 25GbE ports can be used for iSCSI. Reference/topics: B10000 host-port sizing, iSCSI connectivity, SFP28 transceiver validation, BOM review.

The correct answer is C because adding additional expansion chassis changes the physical hardware boundary of the HPE Superdome Flex complex and the resources assigned to the existing nPartition. Such a change cannot be treated like a live virtual-machine operation or a simple online software adjustment. The existing nPartition must be powered off before the physical expansion and partition-resource changes can be completed safely and consistently. Option A is incorrect because HPE OneView management does not require removing the nPartition from management merely to perform a hardware expansion; HPE OneView supports management of Superdome Flex-class infrastructure. Option B is incorrect because adding expansion chassis does not require replacing an expansion chassis with another base chassis for I/O redundancy in the way stated. Option D is also insufficient because placing the partition into a maintenance mode from the Rack Management Controller CLI is not equivalent to powering off the partition for a chassis-level expansion. The course includes Superdome Flex and scale-up compute designs for database and mission-critical workloads, so this question validates correct lifecycle planning for large HPE scale-up systems.

The correct answer is D because an HPE SimpliVity stretched cluster requires an external arbitration mechanism to preserve data consistency and avoid split-brain behavior when communication between sites is disrupted. The arbiter should be placed at a third site, separate from the two availability zones or data-center locations that host the stretched cluster nodes. Deploying arbiters in both production sites would not provide the same neutral quorum behavior, so option A is incorrect. Option C is also incorrect because a stretched SimpliVity deployment is typically built across two availability zones or two sites, with a third-site arbiter or witness component, not four availability zones. Option B is not the governing HA design rule; the design requirement is determined by the SimpliVity architecture, cluster type, and VMware supportability, not a blanket statement that standard HA requires vSphere Foundation at minimum. The Advanced HPE Edge-to-Cloud Solutions course covers SimpliVity and business continuity/disaster recovery patterns, and this question tests the candidate’s ability to select the correct HA architecture component for a stretched-cluster design.