Pass the USGBC Leadership in Energy and Environmental Design (LEED) LEED-Green-Associate Questions and answers with Dumpstech

Scope 1 greenhouse gas emissions are direct emissions from sources that are owned or controlled by the organization. On-site landfills are an example of a source of Scope 1 emissions, as they release methane and carbon dioxide from the decomposition of organic waste12.

Business travel, purchased electricity, and employee commuting are examples of sources of Scope 2 or Scope 3 emissions, which are indirect emissions from sources that are not owned or controlled by the organization. Business travel and employee commuting are Scope 3 emissions, as they occur from the activities of the organization’s value chain, such as suppliers and customers12. Purchased electricity is a Scope 2 emission, as it occurs from the generation of electricity that the organization consumes

Life-cycle costing (LCC) is a method of estimating the total cost of owning and operating an asset over its entire life span. LCC considers all costs associated with the acquisition, installation, operation, maintenance, and disposal of the asset12. LCC can help businesses make better decisions about purchasing, budgeting, pricing, and investing in assets2.

LCC does not quantify environmental impacts such as acidification, eutrophication, or global warming. These impacts are measured by life-cycle assessment (LCA), which is a method of evaluating the environmental effects of a product or service throughout its life cycle. LCA considers the inputs and outputs of materials, energy, and emissions at each stage of the product or service life cycle34. LCA can help businesses identify opportunities to reduce their environmental footprint, improve their sustainability performance, and comply with environmental regulations4.

However, LCC and LCA are often used together to compare different alternatives based on both economic and environmental criteria. For example, a business may use LCC to estimate the energy costs of different lighting options, and LCA to estimate the greenhouse gas emissions of each option. By combining LCC and LCA results, the business can select the option that minimizes both costs and emissions.

One of the goals of the LEED rating system is to reduce greenhouse gas emissions from transportation by encouraging alternative modes of transportation that are less dependent on fossil fuels. Providing bicycle storage and shower facilities is a strategy that encourages a building’s users to use bicycles as a means of transportation, which can reduce vehicle miles traveled, fuel consumption, air pollution, traffic congestion, and parking demand. This strategy can also promote physical activity and health benefits for the users . References: LEED v4 Green Associate Candidate Handbook, LEED v4 BD+C Reference Guide

Unless mitigated, resource consumption over the life of a conventional building incrementally increases the total emissions footprint. This is because conventional buildings often use non-renewable resources for energy and materials, which contribute to greenhouse gas emissions during extraction, production, use, and disposal. References: LEED Green Associate Candidate Handbook, U.S. Green Building Council resources

Developing a construction purchasing policy is a strategy that promotes sustainable purchasing during construction. A construction purchasing policy is a document that outlines the criteria and requirements for selecting materials, products, and services that have lower environmental impacts and support human health during construction. A construction purchasing policy can address issues such as recycled content, regional materials, certified wood, low-emitting materials, rapidly renewable materials, durability, life cycle assessment, waste reduction, and indoor air quality. The other options are not strategies that promote sustainable purchasing during construction. Specifying green electronic equipment is relevant for operations purchasing, not construction purchasing. Reducing regional materials expense by 10% does not necessarily imply sustainable purchasing, as regional materials may have higher or lower environmental impacts depending on their source and transportation methods. Implementing an erosion and sedimentation plan is a strategy that protects water quality during construction, but does not address sustainable purchasing. References: LEED Green Associate Candidate Handbook, page 24; USGBC, [Guide to LEED Certification: Commercial], page 12.

A Renewable Energy Certificate (REC) is a tradable commodity that represents proof that one unit of electricity was generated from a renewable energy source. RECs are used to track and trade renewable energy in the open market, providing an economic incentive for renewable energy generation. References: LEED Green Associate Candidate Handbook, U.S. Green Building Council resources

impervious surfaces are those that do not allow water to infiltrate into the soil, such as asphalt, concrete, roofs, or compacted soil. Impervious surfaces increase the amount and speed of stormwater runoff, which can cause erosion, sedimentation, flooding, and pollution of downstream water bodies. Minimizing impervious surfaces can help reduce these negative impacts and preserve the aquatic habitat and natural stream morphology12.

Native vegetation is the plant life that is adapted to the local climate and soil conditions. Native vegetation can help filter pollutants, stabilize soils, reduce runoff, provide shade, and create habitat for wildlife. Enhancing native vegetation can help restore the natural functions and diversity of the ecosystem and protect the aquatic habitat and natural stream morphology13.

Rainwater is the precipitation that falls on the site. Rainwater can be captured and reused for various purposes, such as irrigation, toilet flushing, or cooling. Capturing and reusing rainwater can help reduce potable water demand, decrease stormwater runoff, and prevent flooding and pollution of downstream water bodies. Capturing and reusing rainwater can help conserve water resources and protect the aquatic habitat and natural stream morphology1 .

These strategies are consistent with the LEED v4 requirements for the Sustainable Sites credit category, which aims to protect and restore habitat, manage stormwater, reduce heat island effects, and promote alternative transportation.

Low cubicle partitions enhance the spread of daylight deeper into office spaces, improving natural lighting and reducing dependence on artificial lighting. This supports LEED credits under Indoor Environmental Quality, which aim to optimize daylight for better occupant health, productivity, and energy savings​​.

One of the things that LEED promotes by encouraging compact development is walkability. Compact development is a form of urban planning that aims to reduce sprawland make more efficient use of land and resources by increasing density, diversity, and connectivity of land uses5. Compact development can enhance walkability by creating mixed-use neighborhoods that provide a variety of destinations within walking distance, such as shops, services, workplaces, schools, parks, and transit stops. Walkability can offer multiple benefits for the environment, health, economy, and social equity. For example, walkability can reduce greenhouse gas emissions and air pollution byreplacing car trips with walking or transit; improve physical and mental health by increasing physical activity and reducing stress; support local businesses and generate tax revenues by increasing foot traffic and property values; and foster social cohesion and civic engagement by creating vibrant public spaces and enhancing accessibility for all6. References: Compact urban development6; LEED v4 BD+C Reference Guide, Location and Transportation, page 15

The USGBC member logo may be displayed by an organization that is a member of the USGBC. Membership in the USGBC is organizational, not individual, so the logo represents the organization’s commitment to sustainability and green building practices. References: LEED Green Associate Candidate Handbook, U.S. Green Building Council resources