Pass the USGBC Leadership in Energy and Environmental Design (LEED) LEED-Green-Associate Questions and answers with Dumpstech

ASHRAE developed the MERV scale, which rates air filter efficiency in capturing airborne particles. LEED references MERV ratings in Indoor Environmental Quality credits to ensure air quality​​.

Harvesting rainwater reduces reliance on potable water for non-potable uses like irrigation and flushing. LEED supports this approach under Water Efficiency credits for reducing potable water consumption​​.

One of the values and benefits of building green is that it will enhance the health of the building occupants. Building green is a process that incorporates environmental considerations into every stage of a building’s life cycle, from design to construction to operation to end-of-life. Building green can improve the indoor environmental quality (IEQ) of a building, which is the physical and psychological conditions of the indoor spaces that affect the health, comfort, and productivity of the occupants. Building green can enhance IEQ by using low-emitting materials, providing adequate ventilation, controlling temperature and humidity, optimizing daylighting and lighting quality, reducing noise levels, and promoting occupant well-being12. References: LEED v4 Green Associate Candidate Handbook1, LEED v4 BD+C Reference Guide2

LEED uses specific ASHRAE standards for energy and indoor air quality:

“ASHRAE 90.1-2010 is used for Minimum Energy Performance...”

“ASHRAE 62.1-2010 is used for Minimum Indoor Air Quality Performance...”

SMACNA is related to construction air quality, not performance standards.

In addition to temperature and air movement, humidity is another factor to consider when implementing thermal comfort strategies. Humidity is the amount of water vapor in the air, which affects how warm or cool people feel. High humidity can make people feel hotter and more uncomfortable, while low humidity can cause dryness and irritation of the skin, eyes, nose, and throat. Thermal comfort strategies should aim to maintain an optimal level of humidity that balances human comfort and health with energy efficiency and moisture control. The other options are not factors to consider when implementing thermal comfort strategies. Methane off-gassing is the release of methane gas from organic matter decomposition or anaerobic digestion, which contributes to greenhouse gas emissions and climate change. Carbon dioxide concentrations are a measure of indoor air quality that indicates the level of ventilation and fresh air supply in a space. Combustion processes from vehicles are sources of outdoor air pollution that emit carbon monoxide, nitrogen oxides, particulate matter, and other harmful substances. References: LEED Green Associate Candidate Handbook, page 29; USGBC, [Indoor Environmental Quality], page 2.

Water closets, also known as toilets, are fixtures that use water to flush human waste into a sewer or septic system. The unit of measure for water closets is gallons (liters) per flush, which indicates the amount of water used for each flushing cycle. The water efficiency of water closets can vary depending on the design, technology, and regulation of the fixture. The LEED rating system encourages the use of water-efficient fixtures that reduce water consumption and wastewater generation12. References: LEED v4 Green Associate Candidate Handbook1, EPA’s WaterSense Toilets2

Retrocommissioning is a process applied to existing buildings to ensure that they continue to perform optimally for the current use. This process involves checking systems to see if they function as intended, making necessary repairs or improvements, and ensuring that building staff are trained in the operation and maintenance of systems. References: LEED Green Associate Candidate Handbook, U.S. Green Building Council resources

The principle of life-cycle impact reduction in LEED aims to minimize the environmental impact of materials over the life span of the building. LEED v4 specifically awards points for strategies such as:

Reuse of existing buildings and materials

Design for flexibility and longevity

High-density and mixed-use developments that reduce resource consumption per capita

According to the LEED BD+C v4 Study Guide, dense, mixed-use developments are inherently more sustainable because they reduce infrastructure needs, make efficient use of land and materials, and support walkability, which further reduces environmental impacts from transportation and land development.

Option D, “a densely constructed community with mixed-use ground floor services,” directly aligns with these sustainability strategies by:

Encouraging efficient land use

Supporting reuse of space over time

Minimizing transportation impact

Facilitating shared resources

In contrast, Options A, B, and C represent conventional or low-density developments that typically require more material per capita and offer fewer opportunities for lifecycle reuse or conservation.

An externality is a consequence of an economic activity that affects other parties who are not directly involved in the activity. Externalities can be positive or negative, depending on whether they create benefits or costs for others. When a developer builds a new shopping center in a rural area, one externality might be an increase in traffic on adjacent roads. This is a negative externality because it imposes costs on other road users who are not part of thedevelopment project, such as increased travel time, fuel consumption, air pollution, noise pollution, and accident risk13. References: LEED v4 Green Associate Candidate Handbook1, Investopedia’s Externality

LEED certification is awarded based on the number of points a project earns across several categories of green building performance. The range of points required to maintain Gold level of LEED certification is 60-79, out of a possible 110 points. The other levels of LEED certification are: Certified (40-49 points), Silver (50-59points), and Platinum (80 or more points)13. References: LEED v4 Green Associate Candidate Handbook1, LEED v4 BD+C Reference Guide3