Pass the USGBC Leadership in Energy and Environmental Design (LEED) LEED-Green-Associate Questions and answers with Dumpstech

LEED considers products to be environmentally preferable when they are locally extracted, manufactured, and purchased. This is because local sourcing reduces the environmental impact associated with transportation, supports local economies, and can often ensure that the materials are suitable for the local climate and conditions. References: LEED Green Associate Candidate Handbook, U.S. Green Building Council resources

LEED certification is awarded based on the number of points a project earns across several categories of green building performance. The range of points required to achieve LEED Silver is 50-59, out of a possible 110 points. The other levels of LEED certification are: Certified (40-49 points), Gold (60-79 points), and Platinum (80 or more points)12. Therefore, if a project initially has 34 credit points,it would need 20 additional points to reach the minimum threshold for LEED Silver. References: LEED v4 Green Associate Candidate Handbook1, LEED v4 BD+C Reference Guide2

According to the LeadingGreen Guide:

“Individual controls for lighting have a significant effect on occupants’ comfort. Meeting the unique needs of each occupant can be accomplished through effective design of lighting controls…”

LEED credits under EQc6 emphasize providing lighting comfort and energy savings through such controls.

The water use reduction for a project is determined by finding the difference between the baseline conditions and the calculated installed case. The baseline conditions are the water use of the project if it were designed to meet the minimum requirements of the Energy Policy Act of 1992 or a local equivalent, whichever is more stringent. The calculated installed case is the water use of the project based on the actual fixtures and fittings installed or specified. The water use reduction is calculated as a percentage of savings from the baseline conditions. The LEED Green Associate Candidate Handbook states that one of the strategies for achieving water efficiency is to “calculate water use reduction by comparing a building project’s water use with the water use baseline calculated for the building after meeting the Energy Policy Act of 1992 fixture performance requirements” [1, p. 14]. References: LEED Green Associate Candidate Handbook, [Water Use Reduction | U.S. Green Building Council]

Only 3% of the Earth’s water is fresh, and a significant portion is locked in glaciers and ice caps. LEED emphasizes water conservation strategies to protect this finite resource​​.

The Promote Sustainable and Regenerative Material Resource Cycles impact category in LEED encourages the use of materials that can be continually cycled back into the same system at their end-of-life. This is referred to as moving to cyclical, non-depleting material cycles. It promotes the use of renewable or recyclable materials and reduces waste. References: LEED Green Associate Candidate Handbook, U.S. Green Building Council resources

According to the EPA and emphasized by LEED:

“The preferred waste management strategies described by the U.S. Environmental Protection Agency (EPA) are source reduction, reuse, recycling and recovery.”

"Reduce" or "source reduction" is the top strategy for avoiding waste altogether.

Installing a bioswale is a design technique that should be used to help prevent stormwater damage to the building and surrounding site. A bioswale is a vegetated channel that conveys stormwater runoff while filtering pollutants, reducing peak flow rates, increasing infiltration, and providing habitat. A bioswale can help prevent stormwater damage by reducing erosion, flooding, sedimentation, and contamination of waterways. The other options are not design techniques that should be used to help prevent stormwater damage to the building and surrounding site. Directing runoff into a stream is a design technique that can cause stormwater damage by increasing the volume and velocity of water entering the stream, resulting in erosion, flooding, sedimentation, and contamination of the stream. Paving the site with high Solar Reflectance Index (SRI) material is a design technique that can reduce the heat island effect by reflecting more solar radiation than conventional paving materials, but it does not prevent stormwater damage as it does not reduce runoff or improve water quality. Paving the site with impervious material is a design technique that can cause stormwater damage by preventing infiltration and increasing runoff, resulting in erosion, flooding, sedimentation, and contamination of waterways. References: LEED Green Associate Candidate Handbook, page 32; USGBC [Sustainable Sites], page 4-5.

Integrative process is a collaborative approach that involves all project stakeholders in the design and decision-making process from the beginning to the end of a project. It aims to optimize the performance, environmental, social, and economic outcomes of a project by considering the interrelationships and synergies between various building and site systems. One of the key aspects of integrative process is to establish feedback loops that allow for continuous monitoring, evaluation, and improvement of the project performance during its operation. Therefore, option C is an example of integrative process, while the other options are not directly related to it. References: Integrative process | U.S. Green Building Council, section “Integrative Process”; Understanding Integrative Design in LEED v4, page 1; LEED Integrative Process Credit Explained, section “INTEGRATIVE PROCESS V4 CREDIT OVERVIEW”

LEED Operations & Maintenance focuses on:

“Green Cleaning – the use of environmentally preferred cleaning practices and materials after occupancy…”

It’s a post-occupancy strategy to maintain indoor environmental quality.