Summer Sale Limited Time 75% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code = simple75
Pass the Cisco CCNA 200-301 Questions and answers with Dumpstech
Refer to Exhibit.
Which action do the switches take on the trunk link?
What is a role of access points in an enterprise network?
Refer to Exhibit.
Which configuration must be applied to the router that configures PAT to translate all addresses in VLAN 200 while allowing devices on VLAN 100 to use their own IP addresses?
Which two values or settings must be entered when configuring a new WLAN in the Cisco Wireless LAN Controller GUI? (Choose two)
Refer to the exhibit.
Only four switches are participating in the VLAN spanning-tree process.
Branch-1 priority 614440
Branch-2: priority 39082416
Branch-3: priority 0
Branch-4: root primary
Which switch becomes the permanent root bridge for VLAN 5?
What is a similarly between 1000BASE-LX and 1000BASE-T standards?
What is a function of a Layer 3 switch?
Why does a switch flood a frame to all ports?
An engineer requires a scratch interface to actively attempt to establish a trunk link with a neighbor switch. What command must be configured?
A network administrator enabled port security on a switch interface connected to a printer. What is the next configuration action in order to allow the port to learn the MAC address of the printer and insert it into the table automatically?
Refer to the exhibit.
Drag and drop the networking parameters from the left onto the correct values on the right.
Drag and drop the descriptions from the left onto the configuration-management technologies on the right.
Which configuration management mechanism uses TCP port 22 by default when communicating with managed nodes?
Which type of IPv6 address is publicly routable in the same way as IPv4 public address?
What is the purpose of an SSID?
Drag the descriptions of IP protocol transmissions from the left onto the IP traffic types on the right.
Which protocol does an access point use to draw power from a connected switch?
When deploying syslog, which severity level logs informational message?
Refer to the exhibit.
What does router R1 use as its OSPF router-ID?
Refer to the exhibit.
An administrator configures four switches for local authentication using passwords that are stored in a cryptographic hash. The four switches must also support SSH access for administrators to manage the network infrastructure. Which switch is configured correctly to meet these requirements?
What are two benefits of using the PortFast feature? (Choose two )
Refer to the exhibit.
If R1 receives a packet destined to 172.161.1, to which IP address does it send the packet?
Refer to the exhibit.
Which action is expected from SW1 when the untagged frame is received on the GigabitEthernet0/1 interface?
An implementer is preparing hardware for virtualization to create virtual machines on a host. What is needed to provide communication between hardware and virtual machines?
Refer to the exhibit. A VTY password has been set to Labtest32! for remote access. Which commands are required to allow only SSH access and to hide passwords in the running configuration?
Refer to the exhibit. A network engineer is adding another physical interface as a new member to the existing Port-Channel1 bundle.
Which command set must be configured on the new interface to complete the process?
What is represented by the word " LB13 " within this JSON schema?
Which type of wired port is required when an AP offers one unique SSID, passes client data and management traffic, and is in autonomous mode?
Refer to the exhibit. OSPF neighbors routers A, B, C, and D are sending a route for 10.227.150.160/27. When the current route for 10.227.150.160/27 becomes unavailable, which cost will router Y use to route traffic to 10.227.150.160/27?
What is represented in line 3 within this JSON schema?
Which IP address is used when an administrator must open a web-based management session with a lightweight AP?
What is a characteristic of private IPv4 addressing?
How is AI used to identify issues within network traffic?
How does MAC learning function?
Refer to the exhibit. The routers R1-LAB and R2-LAB are configured with link-local addresses. What command must be applied to interface Gi0/0 on R1-LAB for an automated address self-assignment on the IPv6 network?
Refer to the exhibit. An engineer is using the Cisco WLC GUI to configure a WLAN for WPA2 encryption with AES and preshared key Cisc0123456. After the engineer selects the WPA + WPA2 option from the Layer 2 Security drop-down, which two tasks must they perform to complete the process? (Choose two)
Which type of wired port is required when an AP offers one unique SSID, passes client data and management traffic, and is in autonomous mode?
A new DHCP server has been deployed in a corporate environment with lease time set to eight hours. Which CMD command on a Windows-based device allows the engineer to verify the DHCP lease expiration?
Refer to the exhibit. Routers R1 and R2 have been configured with their respective LAN interfaces. The two circuits are operational and reachable across the WAN. Which command set establishes failover redundancy if the primary circuit goes down?
Which cloud-provided service allows an organization to install its own operating system on a virtual machine?
Which statement describes virtual machines?
What is a reason to implement HSRP on a network?
Refer to the exhibit. What is the administrative distance for the advertised prefix that includes the host IP address 192.168.20.1?
Which type of protocol is VRRP?
Drag and drop the IPv6 address from the left onto the type on the right.
How does automation affect network management processes?
Refer to the exhibit. Which next hop is used to route packets to the application server at 152.168.32.85?
Refer to the exhibit.
The LACP EtherChannel is configured, and the last change is to modify the interfaces on SwitchA to respond to packets received, but not to initiate negotiation. The interface range gigabitethernet0/0-15 command is entered. What must be configured next?
How does MAC learning function?
Refer to the exhibit.
What is the metric for the route to the 192.168.10.33 host?
