Spring Sale Limited Time 75% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code = simple75

Pass the Cisco CCNP Enterprise 300-410 Questions and answers with Dumpstech

Exam 300-410 Premium Access

View all detail and faqs for the 300-410 exam

Go to Exam
Practice at least 50% of the questions to maximize your chances of passing.
Viewing page 2 out of 13 pages
Viewing questions 16-30 out of questions
Questions # 16:

Question # 16

Refer to the exhibit. The OSPF neighbor relationship is not coming up What must be configured to restore OSPF neighbor adjacency?

Options:

A.

OSPF on the remote router

B.

matching hello timers

C.

use router ID

D.

matching MTU values

Questions # 17:

Refer to the exhibit.

Question # 17

Which two actions should be taken to access the server? (Choose two.)

Options:

A.

Modify the access list to add a second line of permit ip any

B.

Modify the access list to deny the route to 192.168.2.2.

C.

Modify distribute list seq 10 to permit the route to 192.168.2.2.

D.

Add a sequence 20 in the route map to permit access list 1.

E.

Add a floating static route to reach to 192.168.2.2 with administrative distance higher than OSPF

Questions # 18:

In which two ways does the IPv6 First-Hop Security Binding Table operate? (Choose two.)

Options:

A.

by IPv6 routing protocols to securely build neighborships without the need of authentication

B.

by the recovery mechanism to recover the binding table in the event of a device reboot

C.

by IPv6 HSRP to make sure neighbors are authenticated before being used as gateways

D.

by various IPv6 guard features to validate the data link layer address

E.

by storing hashed keys for IPsec tunnels for the built-in IPsec features

Questions # 19:

How are MPLS Layer 3 VPN services deployed?

Options:

A.

The RD and RT values must match under the VRR

B.

The RD and RT values under a VRF must match on the remote PE router

C.

The import and export RT values under a VRF must always be the same.

D.

The label switch path must be available between the local and remote PE routers.

Questions # 20:

Refer to the exhibit.

Question # 20

A user cannot SSH to the router. What action must be taken to resolve this issue?

Options:

A.

Configure transport input ssh

B.

Configure transport output ssh

C.

Configure ip ssh version 2

D.

Configure ip ssh source-interface loopback0

Questions # 21:

Refer to the exhibit.

Question # 21

Which two actions restrict access to router R1 by SSH? (Choose two.)

Options:

A.

Configure transport input ssh on line vty and remove sequence 30 from access list 100.

B.

Configure transport output ssh on line vty and remove sequence 20 from access list 100.

C.

Remove class-map ANY from service-policy CoPP

D.

Configure transport output ssh on line vty and remove sequence 10 from access list 199.

E.

Remove sequence 10 from access list 100 and add sequence 20 deny tcp any any eq telnet to access list 199

Questions # 22:

An engineer configured Reverse Path Forwarding on an interface and noticed that the routes are dropped when a route lookup fails on that interface for a prefix that is available in the routing table Which interface configuration resolves the issue?

Options:

A.

ip verify unicast source reachable-via rx

B.

ip verify unicast source reachable-via any

C.

ip verify unicast source reachable-via allow-default

D.

ip verify unicast source reachable-via 12-src

Questions # 23:

An engineer configured policy-based routing for a destination IP address that does not exist in the routing table. How is the packet treated through the policy for configuring the set ip default next-hop command?

Options:

A.

Packets are not forwarded to the specific next hop.

B.

Packets are forwarded based on the routing table.

C.

Packets are forwarded based on a static route.

D.

Packets are forwarded to the specific next hop.

Questions # 24:

Question # 24

Refer to the exhibit. The remote server is failing to receive the NetFlow data Which action resolves the issue?

Options:

A.

Modify the flow transport command transport udp 2055 to move under flow monitor profile.

B.

Modify the interlace command to Ip flow monitor FLOW-MONITOR-1 Input.

C.

Modify the udp port under flow exporter profile to Ip transport udp 4739.

D.

Modify the flow record command record v4_r1 to move under flow exporter profile.

Questions # 25:

Refer to the exhibit.

Question # 25

AS65510 iBGP is configured for directly connected neighbors. R4 cannot ping or traceroute network 192 168.100.0/24 Which action resolves this issue?

Options:

A.

Configure R4 as a route reflector server and configure R1 as a route reflector client

B.

Configure R1 as a route reflector server and configure R2 and R3 as route reflector clients

C.

Configure R4 as a route reflector server and configure R2 and R3 as route reflector clients.

D.

Configure R1 as a route reflector server and configure R4 as a route reflector client

Questions # 26:

Refer to the exhibit.

Question # 26

Question # 26

An engineer configured BGP between routers R1 and R3 The BOP peers cannot establish neighbor adjacency to be able to exchange routes. Which configuration resolves this issue?

Options:

A.

R3router bgp 6502address-family ipv6neighbor AB01:2011:7:100::1 activate

B.

R1router bgp 6501address-family ipv6neighbor AB01:2011:7:100;:3 activate

C.

R3router bgp 6502neighbor AB01:2011:7:100::1 ebgp-muttlhop 255

D.

R1router bgp 6501 neighborAB01:2011:7:100::3ebgp-multihop255

Questions # 27:

An engineer configured two routers connected to two different service providers using BGP with default attributes. One of the links is presenting high delay, which causes slowness in the network. Which BGP attribute must the engineer configure to avoid using the high-delay ISP link if the second ISP link is up?

Options:

A.

LOCAL_PREF

B.

MED

C.

WEIGHT

D.

AS-PATH

Questions # 28:

Which IGPs are supported by the MPLS LDP autoconfiguration feature?

Options:

A.

RIPv2 and OSPF

B.

OSPF and EIGRP

C.

OSPF and ISIS

D.

ISIS and RIPv2

Questions # 29:

Refer to the exhibits.

Question # 29

When DMVPN is configured, which configuration allows spoke-to-spoke communication using loopback as a tunnel source?

Options:

A.

Configure crypto isakmp key cisco address 0.0.0.0 on the hub.

B.

Configure crypto isakmp key Cisco address 200.1.0.0 255.255.0.0 on the hub.

C.

Configure crypto isakmp key cisco address 200.1.0.0 255.255.0.0 on the spokes.

D.

Configure crypto isakmp key cisco address 0.0.0.0 on the spokes.

Questions # 30:

Refer to the exhibit.

Question # 30

The network administrator must mutually redistribute routes at the Chicago router to the LA and NewYork routers. The configuration of the Chicago router is this:

Question # 30

After the configuration, the LA router receives all the NewYork routes, but NewYork router does not receive any LA routes. Which set of configurations fixes the problem on the Chicago router?

A)

Question # 30

B)

Question # 30

C)

Question # 30

D)

Question # 30

Options:

A.

Option A

B.

Option B

C.

Option C

D.

Option D

Viewing page 2 out of 13 pages
Viewing questions 16-30 out of questions