Spring Sale Limited Time 75% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code = simple75

Pass the Cisco CCNP Enterprise 300-410 Questions and answers with Dumpstech

Exam 300-410 Premium Access

View all detail and faqs for the 300-410 exam

Go to Exam
Practice at least 50% of the questions to maximize your chances of passing.
Viewing page 3 out of 13 pages
Viewing questions 31-45 out of questions
Questions # 31:

Question # 31

Refer to the exhibit. A network administrator redistributed the default static route into OSPF toward all internal routers to reach to Internet. Which set of commands restores reachability to the Internet by internal routers?

Options:

A.

router ospf 1default-information originate

B.

router ospf 1network 0.0.0.0 0.0.0.0 area 0

C.

router ospf 1redistribute connected 0.0.0.0

D.

router ospf 1redistribute static subnets

Questions # 32:

Refer to the exhibit.

Question # 32

An engineer wanted to set a tag of 30 to route 10 1.80.65/32 but it failed How is the issue fixed?

Options:

A.

Modify route-map ospf-to-eigrp permit 30 and match prefix-list ccnp2.

B.

Modify route-map ospf-to-eigrp permit 10 and match prefix-list ccnp2.

C.

Modify prefix-list ccnp3 to add 10.1.64.0/20 le 24

D.

Modify prefix-list ccnp3 to add 10.1.64.0/20 ge 32

Questions # 33:

What are two MPLS label characteristics? (Choose two.)

Options:

A.

The label edge router swaps labels on the received packets.

B.

Labels are imposed in packets after the Layer 3 header.

C.

LDP uses TCP for reliable delivery of information.

D.

An MPLS label is a short identifier that identifies a forwarding equivalence class.

E.

A maximum of two labels can be imposed on an MPLS packet.

Questions # 34:

Refer to the exhibit.

Question # 34

A network administrator has developed a Python script on the local Linux machine and is trying to transfer it to the router. However, the transfer fails. Which action resolves this issue?

Options:

A.

The SSH service must be enabled with the crypto key generate rsa command.

B.

The SCP service must be enabled with the ip scp server enable command.

C.

The Python interpreter must first be enabled with the guestshell enable command.

D.

The SSH access must be allowed on the VTY lines using the transport input ssh command.

Questions # 35:

Refer to exhibit.

Question # 35

Routing protocols are mutually redistributed on R3 and R1. Users report intermittent connectivity to services hosted on the 10.1.1.0/24 prefix. Significant routing update changes are noticed on R3 when the show ip route profile

command is run. How must the services be stabilized?

Options:

A.

The issue with using BGP must be resolved by using another protocol and redistributing it into EIGRP on R3

B.

The routing loop must be fixed by reducing the admin distance of iBGP from 200 to 100 on R3

C.

The routing loop must be fixed by reducing the admin distance of OSPF from 110 to 80 on R3

D.

The issue with using iBGP must be fixed by running eBGP between R3 and R4

Questions # 36:

Refer to the exhibit.

Question # 36

Question # 36

An engineer identifier a Layer 2 loop using DNAC. Which command fixes the problem in the SF-D9300-1 switch?

Options:

A.

no spanning-tree uplinkfast

B.

spanning-tree loopguard default

C.

spanning-tree backbonesfast

D.

spanning-tree portfast bpduguard

Questions # 37:

What statement about route distinguishes in an MPLS network is true?

Options:

A.

Route distinguishes make a unique VPNv4 address across the MPLS network.

B.

Route distinguishers allow multiple instances of a routing table to coexist within the edge router.

C.

Route distinguishes are used for label bindings

D.

Route distinguishes define which prefixes are imported and exported on the edge router

Questions # 38:

Refer to the exhibits.

Question # 38

A user on the 192.168.1.0/24 network can successfully ping 192.168.3.1, but the administrator cannot ping 192.168.3.1 from the LA router. Which set of configurations fixes the issue?

A)

Question # 38

B)

Question # 38

C)

Question # 38

D)

Question # 38

Options:

A.

Option A

B.

Option B

C.

Option C

D.

Option D

Questions # 39:

Clients on ALS2 receive IPv4 and IPv6 addresses but clients on ALS1 receive only IPv4 addresses and not IPv6 addresses. Which action on DSW1 allows clients on ALS1 to receive IPv6 addresses?

Question # 39

Options:

A.

Configure DSW1(config-if)#ipv6 helper address 2002:404:404::404:404

B.

Configure DSW1(dhcp-config)#default-router 2002:A04:A01::A04:A01

C.

Configure DSW1(config)#ipv6 route 2002:404:404:404:404/128 FastEthernet1/0

D.

Configure DSW1(config-if)#ipv6 dhcp relay destination 2002:404:404::404:404 GigabitEthernet1/2

E.

Option A

F.

Option B

G.

Option C

Questions # 40:

Refer to the exhibit.

Question # 40

A network administrator is using the DNA Assurance Dashboard panel to troubleshoot an OSPF adjacency that failed between Edge_NYC interface GigabitEthernet1/3 with Neighbor Edge_SNJ. The administrator observes that the neighborship is stuck in exstart state. How does the administrator fix this issue?

Options:

A.

Configure to match the OSPF interface speed and duplex settings on both routers.

B.

Configure to match the OSPF interface MTU settings on both routers.

C.

Configure to match the OSPF interface unique IP address and subnet mask on both routers.

D.

Configure to match the OSPF interface network types on both routers.

Questions # 41:

Question # 41

Refer to the exhibits. An engineer filtered messages based on severity to minimize log messages. After applying the filter, the engineer noticed that it filtered required messages as well. Which action must the engineer take to resolve the issue?

Options:

A.

Configure syslog level 2.

B.

Configure syslog level 3.

C.

Configure syslog level 4.

D.

Configure syslog level 5.

Questions # 42:

Question # 42

Refer to the exhibit. A network administrator configured an IPv6 access list to allow TCP return traffic only, but it is not working as expected. Which changes resolve this issue?

Options:

A.

ipv6 access-list inboundpermit tcp any any syndeny ipv6 any any log!interface gi0/0ipv6 traffic-filter inbound out

B.

ipv6 access-list inboundpermit tcp any any syndeny ipv6 any any log!interface gi0/0ipv6 traffic-filter inbound in

C.

ipv6 access-list inboundpermit tcp any any establisheddeny ipv6 any any log!interface gi0/0ipv6 traffic-filter inbound in

D.

ipv6 access-list inboundpermit tcp any any establisheddeny ipv6 any any log!interface gi0/0ipv6 traffic-filter inbound out

Questions # 43:

An engineer needs dynamic routing between two routers and is unable to establish OSPF adjacency. The output of the show ip ospf neighbor command shows that the neighbor state is EXSTART/EXCHANGE. Which action should be taken to resolve this issue?

Options:

A.

match the passwords

B.

match the hello timers

C.

match the MTUs

D.

match the network types

Questions # 44:

Refer to the exhibit.

Question # 44

Question # 44

All the serial between R1, R2, and R3 have the Same bandwidth. User on the 192.168.1.0/24 network report slow response times while they access resource on network 192.168.3.0/24. When a traceroute is run on the path. It shows that the packet is getting forwarded via R2 to R3 although the link between R1 and R3 is still up. What must the network administrator to fix the slowness?

Options:

A.

Change the Administrative Distance of EIGRP to 5.

B.

Add a static route on R1 using the next hop of R3.

C.

Remove the static route on R1.

D.

Redistribute theR1 route to EIGRP

Questions # 45:

Refer to the exhibit.

Question # 45

The administrator successfully logs into R1 but cannot access privileged mode commands. What should be configured to resolve the issue?

Options:

A.

aaa authorization reverse-access

B.

secret cisco123! at the end of the username command instead of password cisco123!

C.

matching password on vty lines as cisco123!

D.

enable secret or enable password commands to enter into privileged mode

Viewing page 3 out of 13 pages
Viewing questions 31-45 out of questions