Summer Sale Limited Time 75% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code = simple75

Pass the Cisco CCNP Collaboration 350-801 Questions and answers with Dumpstech

Exam 350-801 Premium Access

View all detail and faqs for the 350-801 exam

Go to Exam
Practice at least 50% of the questions to maximize your chances of passing.
Viewing page 13 out of 13 pages
Viewing questions 121-130 out of questions
Questions # 121:

After an engineer runs the utils ntp status command on the Cisco Unified Communications Manager publisher, the stratum value is 16. Which issue can the

Cisco Unified CM cluster experience?

Options:

A.

Unified CM sends an NTPv4 packet.

B.

Database replication is not synchronized on the Unified CM nodes.

C.

The cluster loses access to port 124 at the firewall.

D.

The date/time group on all phones defaults to the time zone of the engineer.

Questions # 122:

Which method is used to avoid toll fraud with Cisco Unified Communications Manager calls?

Options:

A.

Call policy service

B.

Default zone access rules

C.

TOLLFRAUD_APP

D.

Class of service

Questions # 123:

An engineer is configuring IP telephony. The network relies on DHCP to provide TFTP server addresses to the endpoints. Policy requires the endpoints to receive two server addresses. Which DHCP option must be configured?

Options:

A.

66

B.

143

C.

150

D.

166

Questions # 124:

On which protocol and port combination does Cisco Prime Collaboration receive notifications (Traps and InformRequests) from several network devices in the Collaboration infrastructure for which it has requested notifications?

Options:

A.

UDP161

B.

TCP 161

C.

UDP 162

D.

TCP 80

Questions # 125:

An engineer is integrating Unity Connection with Cisco UCM. Which two actions must be configured so that recording and playback from the IP phones works at all times, including peak traffic hours? (Choose two.)

Options:

A.

Increase the number of voice ports.

B.

If it's a Unity Connection Cluster, ensure that replication is fine and not in split-brain mode.

C.

The phone system to which the phones are registered in Unity Connection has the Default Trap Switch check box enabled.

D.

Add dedicated dial-out ports with the allow trap connections setting selected.

E.

Ensure that you have set up SIP Digest Authentication on the SIP trunk security profile.

Questions # 126:

An engineer configures a Cisco Unified Border Element and must ensure that the codecs negotiated meet the ITSP requirements. The ITSP supports G.7llulaw and G.729 for audio and H.264 for video. The preferred voice codec is G.711. Which configuration meets this requirement?

Options:

A.

B.

C.

D.

Questions # 127:

Why isn’t an end user s PC device in a QoS trust boundary included?

Options:

A.

The end user could incorrectly tag their traffic to bypass firewalls.

B.

The end user may incorrectly tag their traffic to be prioritized over other network traffic.

C.

There is no reason not to include an end user's PC device in a QoS trust boundary.

D.

The end user could incorrectly tag their traffic to advertise their PC as a default gateway.

Questions # 128:

An engineer is trying to implement a new IP phone system in a company The phones connected to the internal network are reporting a status of "unknown " There is no firewall between the Cisco UCM and the phones What is a possible reason for the unknown status?

Options:

A.

Cisco Discovery Protocol is not enabled, and ping sweep is enabled

B.

DNS is not enabled for the phones

C.

DHCP option 150 is not set up correctly

D.

The IP phone management service is not enabled under Services

Questions # 129:

A customer is deploying a SIP IOS gateway for a customer who requires that in-band DTMF relay is first priority and out-of-band DTMF relay is second priority. Which 10$ entry sets the required priority?

Options:

A.

dtmf-relay cisco-rtp

B.

dtmf-relay sip-kpml cisco-rtp

C.

sip-notify dtmf-relay rtp-nte

D.

dtmf-relay rtp-nte sip-notify

Questions # 130:

Refer to the exhibit.

Question # 130

https://i.postimg.cc/wMYy0Fhm/image.png

Drag and drop the flow step labels from the left into the correct order on the right to establish this call flow:

• User 1 calls user 2.

• User 2 answers the call

• user 2 disconnects the call

Question # 130

Options:

Viewing page 13 out of 13 pages
Viewing questions 121-130 out of questions