Pre-Winter Sale Limited Time 75% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code = simple75

Pass the Cisco CCNP Collaboration 350-801 Questions and answers with Dumpstech

Home
Cisco
CCNP Collaboration
350-801
350-801 Questions and Answers

Exam 350-801 Premium Access

View all detail and faqs for the 350-801 exam

Go to Exam

Practice at least 50% of the questions to maximize your chances of passing.

Viewing page 15 out of 15 pages

Viewing questions 141-150 out of questions

Questions # 141:

An engineer with ID012345678 must build an international dial plan in Cisco UCM. Which action is taken when building a variable-length route pattern?

Options:

configure single route pattern for international calls

set up all international route patterns to 0.!

reduce the T302 timer to less than 4 seconds

create a second route pattern followed by the # wildcard

Answer

Explanation

When building a variable-length route pattern, you need to create a second route pattern followed by the # wildcard. This will allow the user to indicate the end of the number by dialing #. For example, if you want to create a route pattern for international calls, you would create a route pattern like this:

9.011!#

This route pattern will match any number that starts with 9.011, followed by any number of digits, and then ends with #.

The other options are incorrect because:

Configuring a single route pattern for international calls will not allow the user to indicate the end of the number.

Setting up all international route patterns to 0.! will not allow the user to indicate the end of the number.

Reducing the T302 timer to less than 4 seconds will not allow the user to indicate the end of the number.

Questions # 142:

A company hosts a conference call with no local users. How does the administrator stop the conference from continuing?

Options:

modifies the Drop Ad Hoc Conference service parameter

modifies the Block OffNet to OffNet Transfer service parameter

removes the transcoder

changes the codecs that are supported on the conference resource

Answer

Questions # 143:

An engineer is configuring a Cisco IOS XE gateway to join three callers together in the same conversation. Which IOS XE media resource must the engineer configure to accomplish this goal?

Options:

IOS XE Hardware MTP

IOS XE Software MTP

IOS XE Hardware Transcoder

IOS XE Hardware Conference Bridge

Answer

Questions # 144:

An engineer is deploying Webex app on Microsoft Windows computers. The engineer wants to ensure that the end users do not receive pop-IQ dialogues %'hen they start the application 'Much two actions ensure the end users are not promted to accept the end-user license (Choose two )

Options:

Set the DELETEUSERDATA=r installation argument

Set the "HKEY_LOCAL_MACHINE,.Software'«WOW6432Node .CiscoCollabHost -Eula_disable

Set the "HKEY_LCX^M._MACHINE .SoftwareCiscoCollabHo$t€ula Setting registry Eula_disable

Set the DEFAULT^'THEMEs-Dark"" installation argument

Set the "/quiet installation argument

Answer

B, C

Explanation

The correct answers are B and C.

To ensure that end users are not prompted to accept the end-user license agreement (EULA) when they start the Webex app, the engineer must set the following two registry keys:

HKEY_LOCAL_MACHINE\Software\WOW6432Node\CiscoCollabHost\Eula_disable

HKEY_LOCAL_MACHINE\Software\CiscoCollabHost\Eula Setting\Eula_disable

Setting these registry keys will disable the EULA prompt for all users who start the Webex app.

The other options are not valid actions to ensure that end users are not prompted to accept the EULA.

Questions # 145:

A Cisco UCM administrator wants to enable the Self-Provisioning feature for end users. Which two prerequisites must be met first? (Choose two.)

Options:

End users must have a secondary extension.

Cisco Extended Functions service must be running

End users must belong to Standard CCM Admin Users group, the Standard CCM End Users group, and the Standard CCM Self-Provisioning group.

End users must have a primary extension.

End users must be associated to a user profile or feature group template that includes a universal line template and universal device template.

Answer

D, E

Questions # 146:

An engineer must deploy the Cisco Webex app to a Virtual Desktop Infrastructure (VDI) environment and support full-featured meetings. Which action must the engineer take to meet these requirements?

Options:

Configure the VDI thin client and install the Webex app

From Control Hub. configure VDI optimization for the Webex app

Install three separate VDI plugins on the VDI thin client

Install two separate VDI plugins on the VDI thin client

Answer

Questions # 147:

Refer to the exhibit.

Question # 147

Which codec should an engineer select for a call made between "Dallas-REG' & "Austin-REG'?

Options:

MP4A-LATM

G.711

OPUS

G.729

Answer

Explanation

The codec preference list for the "Dallas-REG" region is "Factory Default low loss". This list includes the following codecs in order of preference:

G.729

G.711

OPUS

MP4A-LATM

The codec preference list for the "Austin-REG" region is "Factory Default low loss". This list includes the following codecs in order of preference:

G.729

G.711

OPUS

MP4A-LATM

Since both regions have the same codec preference list, the codec that will be used for a call made between "Dallas-REG" and "Austin-REG" is G.729.

G.729 is a narrowband speech codec that was developed by the ITU-T in 1988. It is a low-bitrate codec that provides good quality speech at a bitrate of 8 kbps. G.729 is widely used in VoIP applications and is the default codec for many VoIP systems.

G.711 is a wideband speech codec that was developed by the ITU-T in 1972. It is a high-bitrate codec that provides excellent quality speech at a bitrate of 64 kbps. G.711 is not as widely used as G.729 due to its high bitrate requirements.

OPUS is a lossy audio codec that was developed by the IETF in 2012. It is a low-bitrate codec that provides good quality speech at a bitrate of 6 kbps. OPUS is widely used in VoIP applications and is the default codec for many VoIP systems.

MP4A-LATM is a lossy audio codec that was developed by the IETF in 1999. It is a high-bitrate codec that provides excellent quality speech at a bitrate of 24 kbps. MP4A-LATM is not as widely used as G.729 or OPUS due to its high bitrate requirements.

Questions # 148:

What is the maximum number of servers that are in an IM and Presence presence redundancy group?

Options:

Answer

Questions # 149:

Where would an administrator assign the system shadow location for implementing intercluster enhanced locations CAC in Cisco UCM?

Options:

nongatekeeper-controlled intercluster trunk

SIP intercluster trunk

H.225 trunk

gatekeeper-controlled inter cluster trunk

Answer

Questions # 150:

A SIP phone has been configured in the system with MAC address 0030.96D2.D5CB. The phone retrieves the configuration file from the Cisco UCM. Which naming format is the file that is downloaded?

Options:

SIP003096D2D5CB.cnf.xml

SEP003096D2D5CB.cnf.xml

SEP003096D2D5CB.cnf

SIP003096D2D5CB.cnf

Answer

Viewing page 15 out of 15 pages

Viewing questions 141-150 out of questions

Modal title

Registered Required

In order to participate in the comments you need to be logged-in.
You can sign-up or login (it's free).