Black Friday VIP Hour Limited Time 75% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code = simple75
Pass the Huawei HCIA-Datacom H12-811_V2.0 Questions and answers with Dumpstech
An enterprise ' s network switch has security vulnerabilities because its software version is outdated. The administrator wants to upload a patch file through FTP to fix the vulnerabilities. Which of the following files is a patch file that can be uploaded by the administrator?
On the campus network shown in the figure below, the core switch Core1 functions as a Layer 3 gateway and as a DHCP server to dynamically assign IP addresses to AP1, PC1, PC2, and PC3. The network below Core1 is a Layer 2 network. WAC1 and R1 are connected to Core1 at Layer 3. AP1 goes online through VLAN 100. The wireless service VLAN is VLAN 101, and the wired service VLANs for PC2 and PC3 are VLAN 102 and VLAN 103, respectively. Additionally, the direct forwarding mode is used for wireless traffic forwarding. If no additional VLANs are allowed on device interfaces, which of the following VLANs must be allowed on GE1/0/1 of ACC1? (Select all that apply)
On the switched network shown in the figure, STP is enabled on all devices. SW1 is the root bridge. The port costs are shown in the figure. Other parameters retain the default values. After the network is stable, which of the following ports are not root ports? (Select all that apply)
When source NAT is configured on an enterprise egress device, which of the following may prevent intranet users from accessing the public network?
The figure shows the simplified topology of an enterprise campus network. On this network, the aging time of dynamic MAC address entries on switches is 300 seconds. The administrator connects PC1 to GE1/0/1 of SW1, and PC2 successfully pings the IP address of PC1. The administrator disconnects the Ethernet cable of PC1 from GE1/0/1 of SW1, immediately connects the cable to GE1/0/2 of SW1, and connects GE1/0/1 of SW1 to another switch. Then, the administrator pings the IP address of PC1 from PC2. In this case, SW1 discards the data frame received from PC2.
OSPF has five types of packets. Which type is used to notify an OSPF neighbor of its required LSAs?
Assume that the IP address of GE0/0/0 on R1 is 10.0.12.1/24. Multiple commands can be used to enable OSPF on this interface. Match the commands with their configuration views.
The figure shows the simplified topology of an enterprise campus network. On this network, the aging time of dynamic MAC address entries on switches is 300 seconds.
The administrator connects PC1 to GE1/0/1 of SW1 and successfully pings the IP address of PC2 from PC1. Then, the administrator disconnects the Ethernet cable of PC1
from GE1/0/1 of SW1, immediately connects the cable to GE1/0/2 of SW1, and pings the IP address of PC2 from PC1. Which of the following operations does SW1
perform after receiving a data frame from PC1 when PC1 is connected to GE1/0/2 of SW1?
Network administrators need to manage and maintain devices on the campus network. Which of the following protocols cannot modify device configurations, such as interface IP addresses, device names, and so on?
OSPF supports the division of a network into areas, each identified by an area ID that ranges from 0 to 255. Area 0 is designated as the backbone area.
