Black Friday VIP Hour Limited Time 75% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code = simple75

Pass the Huawei HCIA-Datacom H12-811_V2.0 Questions and answers with Dumpstech

Exam H12-811_V2.0 Premium Access

View all detail and faqs for the H12-811_V2.0 exam

Practice at least 50% of the questions to maximize your chances of passing.
Viewing page 5 out of 5 pages
Viewing questions 41-50 out of questions
Questions # 41:

The administrator performs the configuration shown in the figure on SW1 and SW2. Initially, PC1 is connected to GE1/0/1 of SW1. After the network is stable, the administrator pings the IP addresses of PC2 and PC3 from PC1.

Later, the administrator connects PC1 to GE1/0/2 of SW1. After the network is stable, the administrator pings the IP addresses of PC2 and PC3 from PC1.

Which of the following statements is false about this scenario? (Select all that apply)

Question # 41

Options:

A.

After PC1 is connected to GE1/0/2 of SW1, PC1 can communicate with PC3 only.

B.

After PC1 is connected to GE1/0/2 of SW1, PC1 cannot ping PC2 or PC3.

C.

When PC1 is connected to GE1/0/1 of SW1, PC1 can communicate with PC2 only.

D.

When PC1 is connected to GE1/0/1 of SW1 and the ping operation is performed, the mapping between the MAC address of PC1, VLAN 10, and the MAC address of GE1/0/1 is generated on SW1.

Questions # 42:

Unlike distance-vector routing protocols, link-state routing protocols advertise link states instead of route information. Typical link-state routing protocols include RIP, OSPF, and IS-IS.

Options:

A.

TRUE

B.

FALSE

Questions # 43:

Which of the following database types are supported by NETCONF? (Select all that apply)

Options:

A.

< startup/ >

B.

< running/ >

C.

< candidate/ >

D.

< backup/ >

Questions # 44:

Secure Shell (SSH) is a protocol that uses encryption and authentication mechanisms to implement network services, such as secure access and file transfer, securely over an insecure network. Which of the following protocols use SSH? (Select all that apply)

Options:

A.

DNS

B.

NETCONF

C.

SFTP

D.

STelnet

Questions # 45:

When configuring wireless services on a Huawei WAC, you need to configure a service VLAN to ensure the proper transmission of data packets from STAs. In which of the following profiles is the service VLAN configured?

Options:

A.

Security profile

B.

Regulatory domain profile

C.

VAP profile

D.

SSID profile

Questions # 46:

The figure shows the simplified topology of an enterprise campus network. On this network, the aging time of dynamic MAC address entries on switches is 300 seconds. Employee A uses PC1 to connect to the GE1/0/1 port of the switch and continuously communicates with PC3 for 10 minutes. After that, the employee disconnects the network cable and leaves the workstation. Subsequently, PC4 continues to communicate with PC3. After 30 minutes, employee B connects PC2 to GE1/0/1 of SW1, and PC2 ' s ARP cache table is empty. At this point, when SW1 receives an ARP request from PC2, it will search the MAC address table and forward the request packet only through GE1/0/3.

Question # 46

Options:

A.

TRUE

B.

FALSE

Questions # 47:

Which of the following phases are required for establishing a connection between an SSH server and an SSH client? (Select all that apply)

Options:

A.

Key exchange

B.

Algorithm negotiation

C.

Version negotiation

D.

User authentication

Questions # 48:

Given the following Python code, the output of print(Test) is the same as that of print(test). Test = ' Hello World ' ; test = ' hello world '

Options:

A.

TRUE

B.

FALSE

Questions # 49:

The undo command can be used in the CLI of a Huawei device to restore default settings, disable functions, or delete configurations. Which of the following are correct undo commands? (Select all that apply)

Options:

A.

< HUAWEI > system-view[HUAWEI] undo system-view < HUAWEI >

B.

[HUAWEI] interface GE 1/0/1[HUAWEI-GE1/0/1] ip address 10.12.1.1 24[HUAWEI-GE1/0/1] undo ip address

C.

[HUAWEI] interface GE 1/0/1[HUAWEI-GE1/0/1] undo portswitch[HUAWEI-GE1/0/1]

D.

[HUAWEI] sysname TEST[TEST] undo sysname[HUAWEI]

Questions # 50:

On the network shown in the figure, the administrator creates Eth-Trunk 1 in manual mode on SW1 and SW2, adds GE1/0/1 and GE1/0/2 on both switches to the Eth-Trunk 1, and sets the traffic forwarding mode to per-packet load balancing. However, the administrator finds that traffic from VLAN 10 cannot be forwarded, while traffic from VLAN 20 can be forwarded normally. The administrator verifies that the configuration of SW1 is correct. Which of the following statements are false about this fault scenario? (Select all that apply)

Question # 50

Options:

A.

The member interface GE1/0/2 of SW2 is faulty and cannot forward traffic.

B.

Eth-Trunk 1 of SW2 may not be allowing packets from VLAN 10 to pass through.

C.

The link aggregation mode configured on SW2 does not match that configured on SW1.

D.

The member interface GE1/0/2 of SW2 may not be allowing packets from VLAN 10 to pass through.

Viewing page 5 out of 5 pages
Viewing questions 41-50 out of questions