Pass the ISTQB Foundation Level ISTQB-CTFL Questions and answers with Dumpstech

Traceability is the ability to trace the relationships between the items of the test basis, such as the requirements, the design, the risks, etc., and the test artifacts, such as the test cases, the test results, the defects, etc. Traceability can provide various benefits for the testing process, such as improving the test coverage, the test quality, the test efficiency, and the test communication. However, not all the statements given are true about the value of maintaining traceability between the test basis and test work products. The statement that is not true is option C, which says that test objectives should be the same for all test levels, although the number of tests designed at various levels can vary significantly. This statement is false, because test objectives are the goals or the purposes of testing, which can vary depending on the test level, the test type, the test technique, the test environment, the test stakeholder, etc. Test objectives can be defined in terms of the test basis, the test coverage, the test quality, the test risk, the test cost, the test time, etc. Test objectives should be specific, measurable, achievable, relevant, and time-bound, and they should be aligned with the project objectives and the quality characteristics. Test objectives should not be the same for all test levels, as different test levels have different focuses, scopes, and perspectives of testing, such as component testing, integration testing, system testing, and acceptance testing. The other statements are true about the value of maintaining traceability between the test basis and test work products, such as:

Traceability can be useful for assessing the impact of a change to a test basis item on the corresponding tests: This statement is true, because traceability can help to identify which tests are affected by a change in the test basis, such as a new requirement, a modified design, a revised risk, etc., and to determine the necessary actions to update, re-execute, or re-evaluate the tests. Traceability can also help to estimate the effort, the cost, and the time needed to implement the change and to verify its impact on the software system.

Traceability can be useful for determining how many test basis items are covered by the corresponding tests: This statement is true, because traceability can help to measure the test coverage, which is the degree to which the test basis is exercised by the test cases. Traceability can help to identify which test basis items are covered, partially covered, or not covered by the tests, and to evaluate the adequacy, the completeness, and the effectiveness of the testing process. Traceability can also help to identify the gaps, the overlaps, or the redundancies in the test coverage, and to prioritize, optimize, or improve the test cases.

Traceability can be useful to support the needs required by the auditing of testing: This statement is true, because traceability can help to provide evidence, documentation, and justification for the testing activities, results, and outcomes. Traceability can help to demonstrate that the testing process follows the standards, the regulations, the policies, and the best practices that are applicable to the software system, the project, or the organization. Traceability can also help to verify that the testing process meets the expectations, the needs, and the satisfaction of the users and the stakeholders. References: ISTQB Certified Tester Foundation Level (CTFL) v4.0 sources and documents:

ISTQB® Certified Tester Foundation Level Syllabus v4.0, Chapter 1.2.2, Testing Policies, Strategies, and Test Approaches1

ISTQB® Certified Tester Foundation Level Syllabus v4.0, Chapter 2.1.1, Test Planning1

ISTQB® Certified Tester Foundation Level Syllabus v4.0, Chapter 2.1.2, Test Monitoring and Control1

ISTQB® Certified Tester Foundation Level Syllabus v4.0, Chapter 2.1.3, Test Analysis and Design1

ISTQB® Glossary of Testing Terms v4.0, Traceability, Test Basis, Test Artifact, Test Objective, Test Level, Test Coverage, Test Quality, Test Risk, Test Cost, Test Time2

Comprehensive and Detailed In-Depth Explanation:

Confirmation testing is performed after a defect is fixed to confirm it no longer exists (A). Regression testing ensures new defects have not been introduced in unchanged parts of the system. Regression testing is broader than confirmation testing and covers unmodified areas affected by the changes. Options B, C, and D misrepresent the relationship and scope of these tests.

Comprehensive and Detailed In-Depth Explanation:

Acceptance criteria 8 states that the system should charge the user on the first business day of the following month. However, the test cycle only verified monthly payments for over a year, without confirming whether payments were processed specifically on the first business day.

(B) is incorrect because the test validated monthly and annual payment options.

(C) is incorrect because not all criteria were fully validated.

(D) is incorrect because OTP verification (6) was tested as part of registration.

Ensuring timely execution of payments (Criteria 8) requires additional validation.

Comprehensive and Detailed In-Depth Explanation:

BDD emphasizes collaboration between developers, testers, and business stakeholders to define system behavior in a readable format (A). It typically uses the Given-When-Then syntax. Unlike unit testing (B), BDD is at a higher level of abstraction. It does not focus solely on non-functional testing (C) and encourages early testing rather than post-development validation (D).

According to the ISTQB Glossary of Testing Terms, Version 4.0, 2018, page 18, a failure is “an event in which a component or system does not perform a required function within specified limits”. In this case, the calculator software does not perform the required function of calculating the correct result for 5+6 within the specified limits of accuracy and precision. Therefore, this is an example of a failure.

The other options are incorrect because:

A mistake is “a human action that produces an incorrect result” (page 25). A mistake is not an event, but an action, and it may or may not lead to a failure. For example, a mistake could be a typo in the code, a wrong assumption in the design, or a misunderstanding of the requirement.

A fault is “a defect in a component or system that can cause the component or system to fail to perform its required function” (page 16). A fault is not an event, but a defect, and it may or may not cause a failure. For example, a fault could be a logical error in the code, a missing specification in the design, or a contradiction in the requirement.

An error is “the difference between a computed, observed, or measured value or condition and the true, specified, or theoretically correct value or condition” (page 15). An error is not an event, but a difference, and it may or may not result in a failure. For example, an error could be a rounding error in the calculation, a measurement error in the observation, or a deviation error in the condition.

References = ISTQB Glossary of Testing Terms, Version 4.0, 2018, pages 15-18, 25; ISTQB CTFL 4.0 - Sample Exam - Answers, Version 1.1, 2023, Question 96, page 34.

This answer is correct because the whole-team approach is a way of working in agile projects where all team members share the responsibility for the quality of the product, and collaborate on delivering value to the customer. The whole-team approach involves testers, developers, business analysts, product owners, and other stakeholders in planning, designing, developing, testing, and delivering the product. The whole-team approach fosters communication, feedback, learning, and continuous improvement within the team. References: ISTQB Glossary of Testing Terms v4.0, ISTQB Foundation Level Syllabus v4.0, Section 3.1.1.1

To determine the optimal test execution schedule that minimizes the number of configuration switches and respects the dependencies, we start with the initial configuration, CONF1.

TC4: It has no dependencies and runs on CONF1 (initial configuration).

TC3: Depends on TC4 and runs on CONF1. Since TC4 is already executed, we can proceed with TC3.

TC2: Depends on TC4 and runs on CONF2. We switch to CONF2 after TC3.

TC1: No dependencies and runs on CONF2. Since we are already in CONF2, we can execute TC1 next.

TC5: Depends on TC1 and runs on CONF2. Since TC1 is already executed, we can proceed with TC5 without additional configuration switches.

By following this sequence (TC4, TC3, TC2, TC1, TC5), we respect the dependencies and minimize the number of configuration switches