Pass the Cisco CCNP Service Provider 350-501 Questions and answers with Dumpstech

Guidelines

-

This is a lab item in which tasks will be performed on virtual devices.

• Refer to the Tasks tab to view the tasks for this lab item.

• Refer to the Topology tab to access the device console(s) and perform the tasks.

• Console access is available for all required devices by clicking the device icon or using the tab(s) above the console window.

• All necessary preconfigurations have been applied.

• Do not change the enable password or hostname for any device.

• Save your configurations to NVRAM before moving to the next item.

• Click Next at the bottom of the screen to submit this lab and move to the next question.

• When Next is clicked, the lab closes and cannot be reopened.

Topology

Tasks

-

R1 and R2 are having issues forming an eBGP neighbor relationship. Troubleshoot and resolve the issue to achieve these goals:

1. Configure R1 and R2 to form a BGP neighborship using their Loopback interfaces.

2. Form the neighbor relationship using a BGP multihop mechanism. Use minimal values to solve the issue.

Refer to the exhibit. OSPF is running in the given network. R1 was previously running EIGRP on a standalone network, and a network engineer just migrated it to OSPF. The R1 peering with R2 has come up.

Which additional action must the engineer take so that R2 receives routes from Area 1 and Area 0 but is prevented from receiving routes from Area 2?

Refer to the exhibit:

Which condition must be met by the OSPF peer of router R1 before the two devices can establish communication?

Refer to the exhibit. A network operations team is implementing eBGP on the service provider network. Data traffic between routers R1 and R4 must use the R2-R3 link, which connects AS 65101 and AS65201. iBGP sessions with adjacent routers are up on 10.10.10.1 and 10.10.10.4. The team is now updating the configuration for eBGP peers on routers R2 and R3. Which action must be taken to meet the requirements?

Refer to the exhibit. A network engineer wants to monitor traffic from the application server and send the output to the external monitoring device at 172.16.20.5. Application server traffic should pass through the R1 Eth2/1 interface for further analysis after it is monitored. Which configuration must be applied on the R1 router?

Refer to the exhibit. OSPF is running in the core, with MPLS configured on all links. A Cisco MPLS TE tunnel is configured with R1 as the headend and R4 as the tail-end router. As traffic on the network increases, the network engineering team is concerned about identifying failures between the tunnel endpoints.

Which action should the engineering team take that will allow them to identify and locate any faults in the path?

Which Cisco software OS uses monolithic architecture?

Which capability does RSVP provide in an MPLS network?

Refer to the exhibit. R1 has two upstream Tier 1 service providers. BGP is in use as the exterior routing protocol, and ISP_A and ISP_B are sending the full BGP table. A network engineer must assign local-preference 70 to all routes with multiple exit discriminator 30. Which configuration must the network engineer apply?

Refer to the exhibit. Router BRDR-1 is configured to receive the 0.0.0.0/0 and 172.17.1.0/24 network via BGP and advertise then into OSPF area 0. An engineer has noticed that the OSPF domain is receiving only the 172.17.1.0/24 route and default router 0.0.0.0/0 is still missing. Which configuration must an engineer apply to resolve this problem?

Option A

Option B

Option C

What Is the primary role of Ansible In a network?

After a possible security breach, the network administrator of an ISP must verify the times that several different users logged into the network. Which command must the administrator enter to display the login time of each user that activated a session?

Refer to the exhibit. Company A is connected to multiple upstream ISPs, with ISP_A serving as the primary upstream ISP. The company A subnet 172.43.232.0 should be announced to the secondary ISP_B only when the FTP server with IP address 10.10.1.1 is not accessible via the primary ISP. Which configuration must be applied on R1?

Drag and drop the functionalities from the left onto the target fields on the right.

Refer to the exhibit. Which additional configuration must an engineer to the adge router to inject a default router into the MP-BGP address family for the internet_Shared_Services dedicated VRF?

A)

B)

C)

D)