Black Friday VIP Hour Limited Time 75% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code = simple75

Pass the HP ACA Campus Access Associate HPE6-A85 Questions and answers with Dumpstech

Exam HPE6-A85 Premium Access

View all detail and faqs for the HPE6-A85 exam

Practice at least 50% of the questions to maximize your chances of passing.
Viewing page 2 out of 6 pages
Viewing questions 11-20 out of questions
Questions # 11:

Which action helps apply WLAN best practice to secure a wireless network for employees?

Options:

A.

Enable MAC authentication for employee access.

B.

Provided an assigned pre-shared key for each employee.

C.

Use 802.1X authentication for employee access.

D.

Use a shared passphrase for all users.

Questions # 12:

How can you indicate the importance or urgency of a network alert?

Options:

A.

Set the priority level of the alert.

B.

Record the alert details in a service log.

C.

Escalate the alert to a different technician.

D.

Assign the alert to a specific user group.

Questions # 13:

When the OSFP dynamic routing protocol is used on an AOS-CX switch, what must match on neighboring devices for routes to be exchanged?

Options:

A.

OSPF passive configuration

B.

OSPF area

C.

router-id

D.

loopback configuration

Questions # 14:

Which feature set does HPE Aruba Networking Central offer to help administrators quickly identify and resolve network infrastructure issues?

Options:

A.

Predictive reporting, historical trends, together with compliance tracking

B.

Traffic shaping, throughput charts, together with network device provisioning

C.

SNMP network monitoring, cable tests, together with firmware version logging

D.

Real-time diagnostics, audit trails, together with AI-driven insights

Questions # 15:

When using the geo-locate scaling method, which preparation step should be completed before implementation?

Options:

A.

Assign devices to the floor before setting up the geo-locate method.

B.

Upload the floor plan file after setting the target points.

C.

Place target points at the comers of the floor plan.

D.

Import a backup floor plan file before setting target points.

Questions # 16:

You have been asked to troubleshoot failed connectivity between a local subnet at the HQ Office, with 490 employees, and a remote subnet at the Branch Office. PC1 cannot ping PC2.

Use the provided topology and show command output to determine the reason for the failure.

Question # 16

Question # 16

Question # 16

Question # 16

Question # 16

Options:

A.

On Branch Office-L3-SW-2-There is no Layer 3 SVI configured in the correct subnet.

B.

On Branch Office-L3-SW-2-The switch does not have a static route to the HQ Office Local Subnet.

C.

On HQ Office L3-SW-1-The switch does not have a static default route to the internet.

D.

On HQ OfficeL3-SW-1-There is no route to the Branch Office.

Questions # 17:

When using OSPF dynamic routing on an AOS-CX switch, which setting must match between neighboring devices for them to exchange routes?

Options:

A.

OSPF network type

B.

OSPF process id

C.

OSPF passive configuration

D.

OSPF router id

Questions # 18:

A hospital relies on extensive mobile equipment to diagnose patients and document patient data. Which access switch is ideal for this large hospital, whose distribution racks have more than 400 ports in a single VSF stack?

Options:

A.

CX 6400

B.

CX 6100

C.

CX 6300

D.

CX 6200

Questions # 19:

Review the following configuration.

Why would OSPF be configured to use the IP address 10.1.200.1 as its router ID?

Question # 19

Options:

A.

The IP address associated with the loopback interface is non-routable and prevents loops.

B.

The loopback interface state is dependent on the management interface state and reduces routing updates.

C.

The IP address associated with the loopback interface is routable and prevents loops.

D.

The loopback interface state is independent of any physical interface and reduces routing updates.

Questions # 20:

A network technician is troubleshooting a new AP at a branch office that is not receiving its configuration from HPE Aruba Networking Central. The other APs at the branch are functioning as expected. The output of the show ap debug cloud-server command shows that “cloud config received” is FALSE.

After confirming that the new AP has Internet access, what should be checked next?

Options:

A.

Verify the AP has a license assigned.

B.

Disable and enable HPE Aruba Networking Central to trigger configuration refresh.

C.

Verify the AP can ping the device on arubanetworks.com.

D.

Disable and enable activate to trigger provisioning refresh.

Viewing page 2 out of 6 pages
Viewing questions 11-20 out of questions