Black Friday VIP Hour Limited Time 75% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code = simple75

Pass the HP ACA Campus Access Associate HPE6-A85 Questions and answers with Dumpstech

Exam HPE6-A85 Premium Access

View all detail and faqs for the HPE6-A85 exam

Practice at least 50% of the questions to maximize your chances of passing.
Viewing page 6 out of 6 pages
Viewing questions 51-60 out of questions
Questions # 51:

You are configuring a network with a stacked pair of CX 6300M switches for distribution and Layer 3 services. You create a new user VLAN that will be used on multiple downstream CX 6200 access-switch stacks connected to the distribution stack. You will create multiple similar VLANs/subnets that will be used across multiple access stacks.

What is the correct way to configure the routable interface for the subnet associated with this VLAN?

Options:

A.

Create an SVI in the subnet on each downstream switch.

B.

Create an SVI in the subnet on the CX 6300M stack.

C.

Create an SVI in the subnet on the CX 6300M stack, and assign the management address of each downstream switch stack to a different IP address in the same subnet.

D.

Create a physically routed interface in the subnet on the CX 6300M stack for each downstream switch.

Questions # 52:

What does a solid amber radio status LED on an HPE Aruba Networking AP indicate?

Options:

A.

The radio is working the 5 GHz band only.

B.

The radio is enabled in monitor or spectrum analysis mode.

C.

The radio is working in mesh mode.

D.

Not enough PoE provided from the switch to power both radios of the AP.

Questions # 53:

What benefit does the History tab provide in troubleshooting tools?

Options:

A.

This enables you to schedule new diagnostic tests to run at specific times.

B.

This delivers a record of previously executed tests and actions for review.

C.

This generates alerts when new network infrastructure issues are detected during tests.

D.

This delivers step-by-step guided solutions to automatically fix detected issues.

Questions # 54:

Match each switching technology to its appropriate use case.

Question # 54

Options:

Questions # 55:

Which test offers insight into available network bandwidth and performance?

Options:

A.

speed test

B.

latency check

C.

ping test

D.

load test

Questions # 56:

Refer to the exhibit.

Based on the given topology, how do you configure Switch 1 with IP address 10.20.0.1/24 so that PC 2 and PC 3 can use this interface as their default gateway?

Question # 56

Options:

A.

vlan 20, ip default gateway 10.20.0.1

B.

router 20, ip address 10.20.0.1/24

C.

vlan 20, ip address 10.20.0.1/24

D.

int vlan 20, ip address 10.20.0.1/24

Questions # 57:

How do UXI probes assist when HPE Aruba Networking Central issues a high-severity alert?

Options:

A.

They use live traffic analysis to identify and remediate potentially misconfigured devices

B.

They correlate device logs with recent changes to identify potential misconfigurations

C.

They run synthetic tests to quickly diagnose the scope and root cause of the problem

D.

They provide logs for incident tracking and recommendations to prevent similar alerts

Questions # 58:

What is indicated by a Stack-LED that flashes amber slowly?

Options:

A.

A port has a stacking failure. Stacking mode is not selected.

B.

One switch has a stacking failure.

C.

Stacking mode selected.

D.

Stacking is synchronizing. Please wait.

Questions # 59:

What does WPA3-Personal use as the source for generating a different Pairwise Master Key (PMK) whenever a station connects to the wireless network?

Options:

A.

Session-specific information (MACs and nonces)

B.

Opportunistic Wireless Encryption (OWE)

C.

Simultaneous Authentication of Equals (SAE)

D.

Key Encryption Key (KEK)

Questions # 60:

What is one benefit of using the Audit Trail in HPE Aruba Networking Central?

Options:

A.

Supports regulatory compliance with detailed logs

B.

Displays real-time network performance metrics

C.

Provides immediate alerts for network issues

D.

Enables configuration changes to be reversed automatically

Viewing page 6 out of 6 pages
Viewing questions 51-60 out of questions