Pass the Cisco CCNP Security 350-701 Questions and answers with Dumpstech

Cisco AnyConnect is a client-based VPN solution that provides secure remote access for individual users from their machines. It allows customization of access policies based on user identity, such as group membership, device posture, or location. This enables granular control over who can access what resources on the network. Cisco AnyConnect also supports various authentication methods, such as certificates, multifactor authentication, or single sign-on. Cisco AnyConnect can be deployed with Cisco Adaptive Security Appliance (ASA) or Cisco Firepower Threat Defense (FTD) as the VPN headend.

Cisco DMVPN is a network-based VPN solution that provides dynamic, on-demand, and scalable connectivity for branch offices, teleworkers, and business partners. It uses multipoint GRE (mGRE) tunnels and Next Hop Resolution Protocol (NHRP) to establish direct spoke-to-spoke communications without traversing the hub. It also supports IPsec encryption and various routing protocols over the tunnel. Cisco DMVPN can be deployed with Cisco IOS routers as the VPN headend.

The advantages of using Cisco AnyConnect over DMVPN are:

It enables VPN access for individual users from their machines, which is useful for mobile workers or telecommuters who need to connect to the network from anywhere.

It allows customization of access policies based on user identity, which is useful for enforcing security and compliance requirements for different types of users or devices.

The advantages of using DMVPN over Cisco AnyConnect are:

It provides spoke-to-spoke communications without traversing the hub, which reduces latency and bandwidth consumption for traffic between remote sites.

It allows different routing protocols to work over the tunnel, which provides flexibility and scalability for network design and management.

The absence of a DNS record in User Activity Search shows that the query is not reaching Cisco’s DNS-layer enforcement. Cisco documents that an Internal Domains entry sends DNS queries to local resolvers and bypasses both the roaming security component and Umbrella DNS protection. By contrast, an External Domains entry bypasses the Secure Web Gateway proxy while retaining DNS-layer protection. Cisco’s Internal and External Domain Lists guidance therefore supports adding this public domain to the External Domains list so its DNS request is evaluated by the SIA DNS category policy. HTTPS inspection is irrelevant when the DNS request itself is missing. Intelligent proxy affects selective web proxying after DNS classification. Adding the domain to the Internal Domains list would preserve the bypass and continue preventing the DNS event from appearing.

================

Explanation

A trusted CA is the only entity that can issue trusted digital certificates. This is extremely important because while PKI manages more of the encryption side of these certificates, authentication is vital to understanding which entities own what keys. Without a trusted CA, anyone can issue their own keys, authentication goes out the window and chaos ensues.

Time synchronization is one of the features that can be configured for managed devices in the device platform settings of the Firepower Management Center (FMC). Time synchronization ensures that the FMC and its managed devices have the same date and time settings, which is important for accurate event logging and reporting. The FMC can act as a Network Time Protocol (NTP) server for its managed devices, or it can use an external NTP server as a time source1. The FMC can also synchronize its time with the system clock of the device where it is installed2. References := 1: Firepower Management Center Device Configuration Guide, 7.1 - Platform Settings 2: Firepower Management Center Configuration Guide, Version 6.6 - Device Management Basics

https://www.cisco.com/c/dam/en_us/about/doing_business/legal/service_descriptions/docs/Cisco_Secure_Managed_Endpoint.pdf

Explanation

Application Visibility and control (AVC) supports NetFlow to export application usage and performance

statistics. This data can be used for analytics, billing, and security policies.

DNS tunneling is a technique that exploits the DNS protocol to tunnel malware and other data through a client-server model. DNS tunneling can be used for data exfiltration, command and control, or IP-over-DNS tunneling. DNS tunneling works by encoding the information of other protocols or programs in DNS queries and responses. An attacker registers a domain, such as badsite.com, and sets up a malicious DNS server that can interpret the encoded data. The attacker then infects a client with malware that can send and receive DNS queries to the attacker’s domain. The malware can use DNS queries to request commands from the attacker, or to send sensitive data to the attacker. The DNS queries and responses look like normal DNS traffic, but they contain hidden data that can bypass network defenses123. References := 1: What Is DNS Tunneling? - Palo Alto Networks 2: What is DNS Tunneling? - Check Point Software 3: What Is DNS Tunneling and How to Detect and Prevent Attacks

Microsegmentation is a technology that limits communication between nodes on the same network segment to individual applications by creating secure zones across cloud and data center environments. Microsegmentation isolates application workloads from one another and secures them individually with granular firewall policies based on a zero-trust security approach1. Microsegmentation can reduce the attack surface, prevent the lateral movement of threats, and strengthen regulatory compliance1.

Serverless infrastructure is a technology that allows developers to run code without provisioning or managing servers2. Serverless infrastructure does not limit communication between nodes on the same network segment to individual applications, but rather abstracts away the underlying infrastructure from the application logic.

SaaS deployment is a technology that delivers software applications over the internet as a service3. SaaS deployment does not limit communication between nodes on the same network segment to individual applications, but rather provides access to software applications from any device and location.

Machine-to-machine firewalling is a technology that controls the communication between machines or devices on a network. Machine-to-machine firewalling does not limit communication between nodes on the same network segment to individual applications, but rather applies rules to the traffic between machines or devices based on their IP addresses, ports, protocols, or other criteria.

References :=

What Is Micro-Segmentation? - Cisco

What is serverless?

What is SaaS?

[Machine-to-Machine Firewalling]

 Cisco AMP for Endpoints provides next-generation protection by leveraging an endpoint protection platform (EPP) and endpoint detection and response (EDR) capabilities. EPP is a set of multifaceted prevention techniques that stop threats from compromising endpoints, such as behavioral analytics, machine learning, and signature-based methods. EDR is a set of powerful features that reduce the attack surface and remediate faster, such as advanced threat hunting, endpoint isolation, and dynamic malware analysis. Cisco AMP for Endpoints also integrates with SecureX, a built-in platform that offers extended detection and response (XDR) capabilities across multiple control points, such as network, cloud, email, and web. By combining EPP, EDR, and XDR, Cisco AMP for Endpoints delivers a comprehensive and resilient endpoint security solution that can detect, respond, and recover from sophisticated attacks. References:

Cisco Secure Endpoint (Formerly AMP for Endpoints) - Cisco

Cisco Secure Endpoint (Formerly AMP for Endpoints) - Cisco

Cisco Secure Endpoint (Formerly AMP for Endpoints) - Cisco

Microsegmentation is a network security technique that enables security architects to logically divide the data center or cloud environment into distinct security segments down to the individual workload level, and then define security controls and deliver services for each unique segment. Microsegmentation software with network virtualization technology is used to create zones in cloud deployments. These granular secure zones isolate workloads, securing them individually with custom, workload-specific policies. Microsegmentation uses a zero-trust model, which means that no traffic is allowed by default, and only explicitly authorized traffic is permitted based on the principle of least privilege. Microsegmentation helps to reduce the attack surface, prevent the lateral movement of threats, and strengthen regulatory compliance. The other options are incorrect because they do not describe microsegmentation accurately. Option B is incorrect because container orchestration platforms, such as Kubernetes, are used to automate the deployment, scaling, and management of containerized applications, but they do not provide microsegmentation by themselves. Option C is incorrect because private VLAN segmentation is a network security technique that isolates hosts within the same VLAN, but it does not provide granular security controls at the workload level. Option D is incorrect because host-based firewall rules are one of the components of microsegmentation, but they are not sufficient to implement microsegmentation without network virtualization and policy automation. References : What Is Microsegmentation? - Palo Alto Networks, What Is Micro-Segmentation? - Cisco, What is Micro-Segmentation? | VMware Glossary

A Cisco Umbrella virtual appliance (VA) is a lightweight virtual machine that acts as a DNS forwarder in your network. It forwards internal DNS queries to Umbrella and provides Umbrella with the internal IP address and hostname of the device that made the request. This allows Umbrella to apply policies and report on traffic based on the subnet, hostname, or user identity of the device1. The other options are not relevant for this scenario. Tenant control features are used to limit access to specific instances of cloud applications, such as Microsoft 365 or Google G Suite2. The Microsoft Active Directory Connector is used to provision users and groups from Active Directory to Umbrella, not to provide IP address information3. An internal domain is a domain that is resolved by your own DNS server, not by Umbrella, and is used to bypass Umbrella for domains that are only accessible within your network4. References:

1: Deploy Virtual Appliances - Umbrella User Guide

2: Manage Tenant Controls - Umbrella SIG User Guide

3: Connect Active Directory to Umbrella to Provision User and Groups

4: Domain Management - Umbrella User Guide

 MFA stands for multi-factor authentication, which is a security method that requires users to provide two or more pieces of evidence to verify their identity before accessing a system. MFA can prevent unauthorized access to the system if a user’s password is compromised, because the attacker would also need to obtain the other factors, such as a one-time code, a biometric scan, or a physical token. MFA can be implemented using various technologies, such as SMS, email, phone call, mobile app, or hardware device. According to Microsoft, adopting MFA can prevent approximately 99.9% of compromised user accounts, significantly bolstering security measures against unauthorized access12. References:

Implementing and Operating Cisco Security Core Technologies (SCOR) v1.0, Module 6: Secure Network Access and Visibility, Lesson 6.1: Implementing Secure Network Access

350-701 SCOR - Cisco, Exam Topics, 6.1 Implement secure network access

What Is Unauthorized Access? 5 Key Prevention Best Practices - Cynet, Best Practice #3: Implement multi-factor authentication

Unauthorized Access: Top 8 Practices for Detecting and Responding - Ekran System, Best Practice #3: Use multi-factor authentication

An application that does not validate user input is particularly susceptible to SQL injection attacks. In an SQL injection attack, an attacker can insert or " inject " a SQL query via the input data from the client to the application. Due to the lack of validation, the malicious SQL commands are executed by the database server, leading to unauthorized access or manipulation of the database.